Rosslare AY-V12B Manuale utente

AY-V12B

Multi-Reader

Installation Manual

This manual and the information contained herein are proprietary to ROSSLARE

ENTERPRISES LIMITED and/or its related companies and/or subsidiaries’

(hereafter: "ROSSLARE"). Only ROSSLARE and its customers have the right to

use the information.

No part of this manual may be re-produced or transmitted in any form or by any

means, electronic or mechanical, for any purpose, without the express written

permission of ROSSLARE.

ROSSLARE owns patents and patent applications, trademarks, copyrights, or

other intellectual property rights covering the subject matter in this manual.

TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN

THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS

AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND

TRANSMITTAL TO THIRD PARTIES WITHOUT EXPRESS WRITTEN PERMISSION

MAY RESULT IN LEGAL PROCEEDINGS.

The furnishing of this manual to any party does not give that party or any third

party any license to these patents, trademarks, copyrights or other intellectual

property rights, except as expressly provided in any written agreement of

ROSSLARE.

ROSSLARE reserves the right to revise and change this document at any time,

without being obliged to announce such revisions or changes beforehand or

after the fact.

Table of Contents

AY-V12B Installation Manual iii

Table of Contents

1. Introduction ................................................................7

2. Technical Specifications..............................................8

3. Installation ..................................................................9

3.1 Installation Kit......................................................................... 9

3.2 Installing the AY-V12B ............................................................ 9

4. Wiring Instructions ...................................................11

5. Operation Instructions..............................................12

A. Limited Warranty ......................................................13

List of Figures

iv AY-V12B Installation Manual

List of Figures

Figure 2: Removing the Top Cover ....................................................................9

List of Tables

AY-V12B Installation Manual v

List of Tables

Table 1: Wiring Colors .....................................................................................11

Notice and Disclaimer

vi AY-V12B Installation Manual

Notice and Disclaimer

This manual’s sole purpose is to assist installers and/or users in the safe and

efficient installation and usage of the system and/or product, and/or software

described herein.

BEFORE ATTEMPTING TO INSTALL AND/OR USE THE SYSTEM,THE INSTALLER AND THE

USER MUST READ THIS MANUAL AND BECOME FAMILIAR WITH ALL SAFETY

REQUIREMENTS AND OPERATING PROCEDURES.

The system must not be used for purposes other than those for which it

was designed.

The use of the software associated with the system and/or product, if

applicable, is subject to the terms of the license provided as part of the

purchase documents.

ROSSLARE exclusive warranty and liability is limited to the warranty and

liability statement provided in an appendix at the end of this document.

This manual describes the maximum configuration of the system with the

maximum number of functions, including future options. Therefore, not all

functions described in this manual may be available in the specific system

and/or product configuration you purchased.

Incorrect operation or installation, or failure of the user to effectively

maintain the system, relieves the manufacturer (and seller) from all or any

responsibility for consequent noncompliance, damage, or injury.

The text, images and graphics contained in the manual are for the purpose

of illustration and reference only.

All data contained herein subject to change without prior notice.

In no event shall manufacturer be liable for any special, direct, indirect,

incidental, consequential, exemplary or punitive damages (including,

without limitation, any and all damages from business interruption, loss of

profits or revenue, cost of capital or loss of use of any property or capital or

injury).

All graphics in this manual are for reference only, some deviation between

the image(s) and the actual product may occur.

All wiring diagrams are intended for reference only, the photograph or

graphic of the PCB(s) are intended for clearer illustration and

understanding of the product and may differ from the actual PCB(s).

Introduction

AY-V12B Installation Manual 7

1. Introduction

The AY-V12B Multi-Reader is an RFID proximity card reader, utilized

with access control systems. The reader is compatible with standard

and passive EM-type cards and tags, and features an output format of

standard Wiegand 26-Bit.

The reader also contains two LED indicators that show the unit’s

status upon power up and the status for card reading attempts.

This manual contains the following information:

Installation instructions

Wiring instructions

Operation instructions

Technical Specifications

8 AY-V12B Installation Manual

2. Technical Specifications

Electrical Characteristics

Power Supply Type Linear type (recommended)

Operating Voltage Range 5 to 16 VDC

Absolute Maximum

(non-operating)

18 VDC

Input Current Standby: 120 mA

Read: 140 mA

Tamper Output Open collector, active low, max. sink

current 30 mA

Maximum Cable Distance to

Controller

150 m (500 ft)

Card Output Format Wiegand 26-Bit

Max. Proximity Card Read

Range*

22 cm (9 in.)

Environmental Characteristics

Operating Temp. Range -32°C to 63°C (-25°F to 145°F)

Operating Humidity Range 0 to 95% (non-condensing)

Suitable for outdoor use (IP54)

Physical Characteristics

Dimensions (H x W x D) 125 x 125 x 21 mm

(4.9 x 4.9 x 0.8 in.)

Weight 285 g (10.1 oz)

* Measured using a Rosslare proximity card or equivalent. Range also depends

on electrical environment and proximity to metal.

Installation

AY-V12B Installation Manual 9

3. Installation

Installation of an RFID reader adjacent to metallic surfaces

might alter the reader’s specifications. To diminish this

interference, use a plastic spacer when mounting the reader.

3.1 Installation Kit

The installation kit comprises of the following items that are to be

used during the installation procedure:

One installation template

Two pan head screws and wall plugs

One L-shaped security screw tool

Two security screws

3.2 Installing the AY-V12B

When installing the reader, you must remove the snap-off cover to

access the screw holes (Figure 1).

Figure 1: Removing the Top Cover

Installation

10 AY-V12B Installation Manual

The reader must be mounted with the appropriate screws (not

supplied), as described in the template provided.

To install the reader:

1. Determine an approximate location for the installation of the

reader.

2. Peel off the back of the self-adhesive installation label template

and locate it at the required location.

3. Using the template as a guide, drill two holes (the size of which

are indicated in the template) to install the reader onto the

surface.

4. Drill a 10-mm (7/16”) hole for the cable. In the event that you are

installing the reader on metal, place a grommet or electrical tape

around the edge of the hole.

5. Route the interface cable from the reader to the controller. A

linear type power supply is recommended.

The reader can also be mounted using strong epoxy glue. After

application, the reader should be firmly held in place until the

glue dries.

Indice

Altri manuali Rosslare Lettore di schede

Rosslare

Rosslare DR-6255 Manuale utente

Rosslare

Rosslare AY-Z12A Manuale utente

Rosslare

Rosslare AY-H12C Manuale utente

Rosslare

Rosslare AY-x25B Series Manuale utente

Rosslare

Rosslare AY-H6255BT Manuale utente

Rosslare

Rosslare MIFARE AY-T6350 Istruzioni per il montaggio

Rosslare

Rosslare AY-R12 Manuale utente

Rosslare

Rosslare DigiTool GA-01 Manuale utente

Rosslare

Rosslare AY-U9**BT series Manuale operativo

Rosslare

Rosslare AY-K20C Manuale utente

Rosslare

Rosslare AYC-E60B Istruzioni per il montaggio

Rosslare

Rosslare AY-U910 Manuale utente

Rosslare

Rosslare MIFARE Classic AY 5B Series Manuale utente

Rosslare

Rosslare AY-Z12 Manuale utente

Rosslare

Rosslare AY-Q6250 Istruzioni per il montaggio

Rosslare

Rosslare AYC-F60 Series Istruzioni per il montaggio

Rosslare

Rosslare CSN SELECT AYC-6355 Series Manuale utente

Rosslare

Rosslare AY-Q12 Istruzioni originali

Rosslare

Rosslare Mifare CP-R25 Istruzioni per il montaggio

Rosslare

Rosslare AY-V64B Istruzioni per il montaggio

Rosslare

Rosslare AY-U920BT-US Manuale utente

Rosslare

Rosslare CSN SMART AY-H6355BT Manuale utente

Rosslare

Rosslare AY 20 Series Manuale utente

Rosslare

Rosslare DR-12C Manuale utente

Manuali Lettore di schede popolari di altre marche

Lindy

Lindy 43185 Manuale utente

Lindy

Lindy 43185 Manuale utente

ViziT

ViziT RD-4F Manuale utente

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manuale utente

AVID ID

AVID ID AVID1043 Manuale utente

Conrad

Conrad PCMCIA Manuale utente

Lindy

Lindy 51541 Manuale utente

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manuale utente

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manuale utente

ACS

ACS ACR122L Manuale utente

Secukey

Secukey S2-MF Manuale utente

Elecom

Elecom MR-SMC07 series Manuale utente

Alien

Alien ALR-9800 Manuale utente

ACS

ACS ACR310 Manuale utente

Datamars

Datamars R-IN1300 MID Manuale utente

Alarm Lock

Alarm Lock AL-PRE2 Manuale utente

xpr

xpr B100PROX-AH Guida utente

SimpleTech

SimpleTech FlashLink Manuale utente