RS PRO RS AI-321 Manuale utente

Africa

RS Components SA

P.O. Box 12182,

Vorna Valley, 1686

20 Indianapolis Street,

Kyalami Business Park,

Kyalami, Midrand

South Africa

www.rs-components.com

Asia

RS Components Ltd.

Suite 1601, Level 16, Tower 1,

Kowloon Commerce Centre,

51 Kwai Cheong Road,

Kwai Chung, Hong Kong

www.rs-components.com

China

RS Components Ltd.

Unit 501, Building C, The New

Bund World Trade Center Phase

II, Shanghai, China

www.rs-components.com

Europe

RS Components Ltd.

PO Box 99, Corby,

Northants.

NN17 9RS

United Kingdom

www.rs-components.com

Japan

RS Components Ltd.

West Tower (12th Floor),

Yokohama Business Park,

134 Godocho, Hodogaya,

Yokohama, Kanagawa 240-0005

Japan

www.rs-components.com

U.S.A

Allied Electronics

7151 Jack Newell Blvd. S.

Fort Worth,

Texas 76118

U.S.A.

www.alliedelec.com

South America

RS Componentes Limitada

Av. Pdte. Eduardo Frei M. 6001-71

Centro Empresas El Cortijo

Conchali, Santiago, Chile

www.rs-components.com

Instruction Manual

RS AI-321

Stock No: 202-0774

Face Recognition Camera

The Face Recognition Scanner supports 3 usage modes, and is equipped with dierent

platform software for more powerful functions.

1. Access Control & Attendance for Company | Equipped with Attendance & Access

Control Management Platform Software for Company.

2. Access Control & Attendance for School | Equipped with Attendance & Access

Control Management Platform for School.

3. Quick Screening | Used for quick temperature screening.

Notice:

During installation and use, all electrical safety regulations of the country and the

region of use must be strictly observed.

When wiring, disassembling and other operations, please be sure to disconnect the

power supply, do not operate with electricity.

If the device emits smoke, produces unusual odors, or makes noises, immediately

turn o the power and unplug it, and contact the dealer or service center in time.

If the equipment is not working properly, please contact customer service, do

not disassemble or modify the equipment in any way. (The company does not

assume any responsibility for problems caused by unauthorized modification or

maintenance)

Do not drop objects on the device or vibrate the device vigorously to keep the device

away from magnetic interference.

Avoid installing the device where the surface vibrates or is vulnerable to shock.

Avoid installing the device at the air outlet of the air conditioner or in a place with

large airow uctuations.

Try to ensure that the equipment is installed vertically.

Please do not use the device in high temperature, low temperature or high humidity

environment.

Please do not aim the lens of the device at strong light objects such as the sun,

incandescent lamp, etc., otherwise it will cause lens damage.

Avoid placing the device in direct sunlight, poorly ventilated locations, or heat source

accessories such as heaters or heaters.

Biometric products cannot be 100% suitable for any anti-counterfeiting environment.

High security level places, please use combination authentication.

2 3

Do not touch the temperature probe with your ngers or blow the probe.

Please make sure no hair, sweat, or hat cover your forehead before measuring

temperature.

If the forehead is cold, wait for the forehead to become warm before taking the

temperature measurement. Such as: after washing the face, after applying ice, after

entering the room from the outside in winter.

1. Product Appearance

Color Camera

Temperature Probe

White Fill Light

Infrared Fill Light

Infrared Camera

LCD Screen

Face Recognition CameraFace Recognition Camera

Microphone

Screw holes for hanging board

Reset Button

Speaker

2. Interface Instruction

1. 6PIN Door Button, Door Sensor, Alarm Interface

2. 11PIN Reserved IO

1 2 3 4 5 6

5V GND NC Door Button Door Sensor Alarm

1 2 3 4 5 6 7 8 9 10 11

PWRON IO7 GND 3.3V IO6 IO5 IO4 IO3 IO2 IO1

4 5

3. 7PIN 12V Power Supply, Relay Interface

1234567

COM NO NC GND GND 12V 12V

4. Ethernet port

5. 2PIN 485 Interface

6. Tamper key

7. Micro USB Port

8. USB-A Port

9. 12V Power Adapter Socket

1 2

485A 485B

3. Wiring Instruction

Face Recognition CameraFace Recognition Camera

Temperature measurement module parameters

Measuring range 32oC~45oC/ 89.6oF~113oF

Measurement accuracy ±0.5oC/ ±0.9oF

Measuring diatance 20~50cm

Measure time 0.5s

System hardware parameters

Processor 4-core A7

Operating system Android 8.1

Memory size 1GB LPDDR3

Storage size 16G EMMC

Cameera Parameters

Resolution Color 200W (1920*1080) Infrared 130W (1280*960)

Imaging device Color AR0230 Infrared AR0130

Lens 2.9mm

Recognize height 1m~2m

Recognition distance 0.3m~1.2m

Angle of view Horizontal: 89oVertical: 57oDiagonal: 98o

Face angle ±30o

Minimum illumination Color ≥0.01LUX at F1.2, Infrared:≥0.01LUX at F1.2

signal to noise ratio Color ≥4dB, Infrared:≥44dB

Wide dynamic range Color ≥105dB, Infrared:≥83.5dB

Interface parameters

Network interface 1 RJ45 10M/ 100M adaptive Ethernet port

USB interface 1 USB interface

Wireless connection WiFi+BLE4.0

RS485 interface 1 RS485 interface

Relay interface 1 relay interface

Fire alarm door check

button 1 re alarm door check button

IO reserved 1 11pin terminal

Power supply DC12V/ 3A

4. Technical Specications

6 7

Smart functions

Face recognition capacity 50000 people

Oine record 100000

Recongition accuracy 99.83%

Face liveness detection Support binocular near infrared live detection

Face recognition speed 1080P @ 25fps, support face detection tracking,

optimization

Face liveness detection

speed About 200ms

Occlusion adaptation About 400ms

Basic parameters

Screen size 7 inch

Product size 268*135*45 (length*width*height)

Operation humidity 10%~90%

Operation temperature 10~40oC/ 50~140oF

5. Access Control & Attendance for Company

At this mode, User need to login to the Attendance & Access Control Management

Platform Software for Company to add the device ID, import employees’ information

and their face photos and congure this device as an attendance device for employees.

After the conguration is complete, the user can use the device to synchronize data.

After synchronization is complete, face recognition/temperature measurement/access

control/attendance can be started.

For detailed instructions, please refer to the guidance of the Face Recognition

Temperature Monitor and the instructions of the Attendance & Access Control

Management Platform Software for Company.

6. Access Control & Attendance for School

At this mode, User need to login to the Attendance & Access Control Management

Platform Software for School to add the device ID, import students and teachers’

information and their face photos and congure this device as an attendance device for

them. After the conguration is complete, the user can use the device to synchronize

data. After synchronization is complete, face recognition/temperature measurement/

access control/attendance can be started.

For detailed instructions, please refer to the guidance of the Face Recognition

Temperature Monitor and the instructions of the Attendance & Access Control

Management Platform Software for School.

7. Quick Screening

At this mode, fast temperature screening and automatic recording of data and face

photos can be performed. User need to download the Temperature Cloud APP to add

the device ID. Scan the QR code as follow to download the APP.

Temperature Cloud APP

8. Scan the QR code as follow to get the guidance of Face Recognition Scanner

and the instructions of the Attendance & Access Control Management Platform

Software.

Face Recognition CameraFace Recognition Camera

8 9

9. Install Instruction

Box 86 for Wall-Mounted Installation

1. Install stickers on the wall, and make holes in the wall according to the height and

position of the stickers to install Box 86.

2. Align the outlet of the hanging board with the center of the Box 86,punch four

mounting holes on the wall according to the punching size diagram,and insert four

wall plugs.

3. Use four KA 4*25 screwsto fix the hanging board to the wall. Connect the cable of

the external device to the cable, arrange the cables,and determine the cable outlet

method.

4. Hook the device from top to bottom on the mounting plate,and make sure that the

upper part of the hanging plate is inserted into the groove on the back of the device.

5. Fix the device and the hanging plate from the bottom with a screw.

Wall punching size chart

Face Recognition CameraFace Recognition Camera

10 11

Wall-Mounted Installation

1. Attach an installation sticker to the wall, make holes in the wall according to the

height and position of the sticker, insert a wall plug, and install 4 hex screws.

2. Fix the hanging board on the wall with four KM 4* 10 screws.

3. Hook the device from top to bottom on the hanging board, and make sure that the

upper part of the hanging board is inserted into the groove on the back of the device.

4. Use a screw to x the device and the hanging plate from the bottom.

Wall punching size chart

Face Recognition CameraFace Recognition Camera

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali RS PRO Macchina fotografica digitale

RS PRO

RS PRO 146-4640 Manuale utente

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente