RuggedCom RuggedSwitch RS500 Manuale utente

RuggedSwitch

RuggedSwitchRuggedSwitch

RuggedSwitch





RS500

RS500 RS500

RS500

Installation Guide

Installation GuideInstallation Guide

Installation Guide

RuggedCom Inc.

30 Whitmore Road,

Woodbridge, Ontario

Canada L4L 7Z4

Web: www.ruggedcom.com

Tel: (905) 856-5288

Fax: (905) 856-1995

Toll Free: (888) 264-0006



Federal Communications Commission Radio Frequency Interference

Statement

This equipment has been tested and found to comply with the limits for a Class A digital device

pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment This

equipment generates, uses and cad radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference on his own expense

Warning: Changes or modifications not expressly approved by RuggedCom Inc. could void the

user’s authority to operate the equipment.

Trademarks:

Ethernet is a trademark of Xerox Corporation

RuggedSwitch is a registered trademark of RuggedCom Inc

Important:

The R 500 contains no user serviceable parts. Attempted service by unauthorized personnel shall

render all warranties null and void.

The R 500 should be installed in a restricted access location where access can only be gained

by service personnel or users who have been instructed about the reasons for the restrictions

applied to the location and about any precautions that shall be taken; and access is through the

use of a tool or lock and key, or other means of security, and is controlled by the authority

responsible for the location.



Table of Contents

1Product Overview.....................................................................................................................4

1.1 Functional Overview............................................................................................... 4

1.2 Feature Highlights.................................................................................................. 4

1.3 R 500 Front Panel Description ............................................................................... 5

1.4 R 500 Top and Bottom View .................................................................................. 6

2Installation ................................................................................................................................7

2.1 DIN Rail Mounting.................................................................................................. 7

2.2 Power upply Wiring and Grounding ....................................................................... 8

2.2.1 Power upply - DC Input.................................................................................... 9

2.3 HIPOT (Dielectric trength) Testing....................................................................... 10

2.4 Failsafe Output Wiring and pecifications............................................................... 11

3Technical pecifications.........................................................................................................12

3.1 Power upply pecifications ................................................................................. 12

3.2 Failsafe Relay pecifications................................................................................. 12

3.3 Networking tandards upported .......................................................................... 12

3.4 Fiber Optical pecifications................................................................................... 13

3.5 Networking Performance pecifications ................................................................. 13

3.6 Type Test pecifications....................................................................................... 14

3.7 Operating Environment......................................................................................... 15

3.8 Physical Dimensions ............................................................................................ 15

3.9 Agency Approvals ................................................................................................ 16

4Warranty.................................................................................................................................16



1Product Overvie

1.1 Functional Overview

The RuggedS itch



 R 500 is a substation hardened, fiber optical Ethernet switch specifically

designed to operate in harsh environments such as those found in electric utility substations and

harsh industrial environments. The R 500 provides 4 10BaseFL fiber optical ports and one

100BaseFX port.

pecifically tested to the same standards as mission critical protective relaying equipment (i.e.

AN I/IEEE C37.90 and IEC 60255) the R 500 is ideally suited to form the Ethernet network in a

UCA2 (Utility Communications Architecture 2.0) based substation automation network. Because

the R 500 was designed to meet the demands of the substation environment it is also ideally

suited for industrial automation networks based on Industrial Ethernet. The reliability of the R 500

exceeds that of commercial Ethernet switches by having no rotating mechanical parts such as

cooling fans and by utilizing high-temperature solid-state components.

1.2 Feature Highlights

Utility Grade (i.e. substation hardened) per AN I/IEEE C37.90, IEC 60255, and the new IEC

61850-3 (2002), IEC 61000-6-5 standards

Operating temperature: -40° to 85°C (no fan)

Radiated RF Immunity: 35V/m per AN I/IEEE C37.90.2

Power supply options: 24VDC, 48VDC or 110VDC

Failsafe output relay for critical failure or error alarming

4 – 10BaseFL (10Mbps) multimode

1 – 100BaseFX fiber optical port

Full-duplex operation (no collisions)



1.3 RS500 Front Panel Descri tion

Fig. 1.3.1 R 500 Front Panel Detail

ITEM Activity Comments

olid Link Established LINK LED (Yellow)

Blinking – Once per second Tx, Rx Activity

Tx LED (Red) Blinking Tx (Transmit) Activity

Rx LED (Green) Blinking Rx (Receive) Activity

POWER LED (Red) olid Power On

Safety Ground

Stud

Po er

Failsafe

Output

Relay

LED

Indicators

10BaseFL Ports

ST Connectors

Reset

Front Panel Vie

Surge Ground

DC(+)

DC(-)

Normally Open

Common

Normally Closed

LINK/Activity

Tx (Transmit)

Rx (Receive)

POWER LED

100BaseFX Port

MTRJ Connector



1.4 RS500 To and Bottom View

Fig. 1.4.1 R 500 Top and Bottom View

Surge Ground

DC(+)

DC(-)

Safety Ground

Stud

Failsafe Output

Relay

Bottom Vie

Top Vie

DIN Rail Mounting

Bracket

100BaseFX Port

MTRJ Connector

10BaseFL Ports

ST Connectors

Reset

DIN Rail Mounting

Bracket



2Installation

2.1 DIN Rail Mounting

Fig. 2.1.1 R 500 Rail Mounting

DIN RAIL

Mounting Latch

Scre Driver Release Action

Release Slot

Release

Direction

RS500 DIN Rail

Mounting & Release

Side Vie Front Vie

DIN RAIL



2.2 Power Su ly Wiring and Grounding

Fig. 2.2.1 R 500 Power upply Inputs

The power supply input is connected as follows:

= DC (+) is connected to the positive (+) terminal if the power source is DC or to the

(Hot) terminal if the power source is AC.

= DC (-) is connected to the negative (-) terminal if the power source is DC or to the

(Neutral) terminal if the power source is AC.

Surge Ground

is used as the ground conductor for all surge and transient suppression

circuitry internal to the R 500. urge Ground is connected directly to the safety ground

terminal internally.

NOTE: Since the Chassis Ground is connected to the equipment ground bus internally, HIPOT

testing cannot be performed in the field

Surge Ground

DC(+)

DC(-)

Safety Ground

Stud



2.2.1 Po er Supply - DC Input

Fig. 2.2.2 Power upply – DC Input

Note: Ground bus can either be connected to the Ground Stud on the rear of the RS500 chassis,

or the Surge Ground port on the screw-in terminal block



2.3 HIPOT (Dielectric Strength) Testing

HIPOT Dielectric strength testing

cannot

be performed in the field due to transient/surge

suppression circuitry connected to the R 500 urge/Chassis Ground. All Rugged witch products

are HIPOT tested according to IEC 60255-5 ( ection 6) during final test.

Indice

Altri manuali RuggedCom Router di rete

RuggedCom

RuggedCom RUGGEDSWITCH RS900G Manuale utente

RuggedCom

RuggedCom RuggedServer RS400 Manuale utente

RuggedCom

RuggedCom RUGGEDBACKBONE RX5000 Manuale

RuggedCom

RuggedCom RuggedSwitch M2200 Manuale utente

RuggedCom

RuggedCom RuggedRouter RX1000 Manuale utente

RuggedCom

RuggedCom RuggedVDSL RS930L Manuale utente

RuggedCom

RuggedCom RuggedServer RS401 Manuale utente

RuggedCom

RuggedCom RuggedSwitch RS900GP Manuale

RuggedCom

RuggedCom RuggedVDSL RS930 Manuale utente

RuggedCom

RuggedCom RUGGEDBACKBONE RX1510 Manuale

RuggedCom

RuggedCom RuggedRouter RX1000 Manuale utente

RuggedCom

RuggedCom RuggedServer RS910 Manuale utente

RuggedCom

RuggedCom RuggedSwitch RS940G Manuale utente

RuggedCom

RuggedCom RuggedServer RS400 Manuale utente

RuggedCom

RuggedCom RuggedSwitch RSG2100 Manuale utente

RuggedCom

RuggedCom RUGGEDSWITCH RS900G Manuale utente

RuggedCom

RuggedCom RuggedVDSL RS900L Manuale utente

RuggedCom

RuggedCom RuggedSwitch RSG2200 Manuale utente

RuggedCom

RuggedCom RuggedServer RS401 Manuale utente

RuggedCom

RuggedCom RuggedVDSL RS900L Manuale utente

RuggedCom

RuggedCom RuggedSwitch RSG2300 Manuale utente

RuggedCom

RuggedCom RuggedSwitch RSG2100P Manuale utente

RuggedCom

RuggedCom RuggedSwitch M2100 Manuale utente

RuggedCom

RuggedCom RuggedRouter RX1000 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza