If the power fails when a user program is being executed
the machine will react as follows when the power supply
is reinstated: it will start up again automatically and the
program will continue from that point at which it was in-
terrupted by the power failure. The startup warning
(horn) will sound before this restart.
In its respective life cycle phases (transport, commission-
ing, setup, operation, cleaning, decommissioning, care /
maintenance, dismantling / disposal) this machine is de-
signed for 1-person operation!
When using this machine, no other person may be present
near the machine. The exception (2-man operation):
Installation and removal of inside and outside lid
Installation and removal of inside lid holder
Installation and removal of tumbling arm
Installation and removal of mixing arm
Installation and removal of standard trolley support
Installation and removal of protective gearbox cover
Transport of machine and machine parts
Maintenance work inside the drum
Depending on the user programs, temperatures down to -
25 °C may be generated in the drum. Take the corre-
sponding precautions.
Do not touch the tumbling arm / mixing arm with your
hands or any object when they are moving! Their rota-
tional speed while the inside lid is open is restricted for
safety reasons!
Make sure before each lifting operation that the standard
trolley sits correctly in the standard trolley support of the
lifting aid and that it is locked!
No person may be present in the swivel range of the
drum!
The drum may be swivelled only when the outside lid is
closed and locked!
The drum can only be swivelled after the lifting aid has
moved to the bottom. Prior to starting a recipe, the lifting
aid must therefore be moved down again!
