Ruida Technology RDV3040-PCI Manuale utente
RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY
RDV3040-PCI
VisionCut operation manual
Read this manual before operation
The content include of electric connections and operating steps
Read the manual to operate the systems
RuiDa Technology Co., Ltd
Addr: 202-203,B-Block,Technology Building,NO.,1057 Nanhai
Avenue,Nanshan District,Shenzhen city,Guangdong
Province,P.R.China
Tel: 0755--26066687
Fax: 0755--26982287
E-mail: sales@rd-acs.com
Web: www.rd-acs.com
https://www.ruidacontroller.com
RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY
COPYRIGHT
All rights reserved.You may not reproduce, transmit, store
in a retrieval system or adapt thispublication, in any form or by
any means, without the prior written permissionof RuiDa,
except as allowed under applicable copyright laws. We have
identifiedwords that we consider as trademarks. Neither the
presence or absence oftrademark identifications affects the
legal status of any trademarks.
RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY
CERTIFICATION
DECLARATION
CE
The product has been certified by the CE (Commutate European) safety certification.
It has passed the corresponding conformity assessment procedure and the
manufacturer's declaration of conformity, in accordance with the relevant EU
directive.
ROHS
This product has been certified by EU legislation (Restriction of Hazardous
Substances) Safety certification; comply with relevant EU environmental regulations.
FCC
This product has been certified by the Federal Communications Commission for
safety, Comply with us electronic safety regulations.
RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY
SAFETY INFORMATION
When using this system, please make sure the operation is correct and the usage is
safe. Some signs or text will be used to remind you to pay attention to the dangerous
matters and some important information.
Dangerous：
Indicates a serious danger. In the process of use, if the operation is
improper or the way of use is wrong, it may cause serious injury or
even death to the user. Please do not operate it easily until you have
made sure that the operation method is correct and the way of use
is correct.
Warning：
Danger.n the process of use, if the operation is improper or the use
is wrong, which may lead to the injury of the personnel, please do
not operate the personnel and related personnel easily, until ensure
the correct operation method and use method is correct before use.
Cautious：
Represents the potential risk of the product. In the process of use,
if the use method is wrong or improper operation, it may cause
damage to the product or some parts. Please do not use it until you
have made sure that the operation method is correct and the usage
is correct.
Important：
Represents important information to be paid attention to during the
use of the product.Please do not ignore this information, this
information will provide effective operational help.
This sign indicates laser radiation, which is usually posted on
products with laser output. Please be careful with laser and pay
attention to safety when using this kind of equipment.
RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY
Sign in、Devanning、Examine cargo
The product itself with plastic or metal shell, can protect the external electrical
components from damage. The products are packed in foam bags and anti-static bags.
If there is any external damage to the package, check the equipment and notify the
carrier and carrier in writing of the damage.
Inportant:
After receiving the product, please check whether the outer package is
intact, check whether the product is complete after unpacking and
whether all parts are intact. If any damage is found, please contact
ruida immediately.
Remove all cargo from package and keep packing material and wiring parts. Please
take care of the safety of the goods when unpacking them.After taking out the goods,
please check whether the parts are complete and intact. If any missing parts or
damaged parts are found, please contact ruida technology immediately.Do not install
or debug the equipment if any obvious damage is found.
RDC6563F standalone fiber cutting system delivery list is shown in the following:（As
the product is constantly updated, the accessories that may be received are different
from this list）
Component
Quantity
Description
RDC3020G-PCI Motion controller
1
RDV3020G-PCI-ACC2 Expansion board
1
Industrial camera 130w
1
Lens 8mm
1
USB line(5m)
1
The camera fixed frame
1
RDV3020G-PCI-ACC1 Expansion board
1
`
RDV3020G-CON68 Connect the cable
1
LED Annular lamp （white）
1
Special applications Red
lamp
Light controller (with connect line)
1
Lamp drive board
1
folding cable
1
RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY
KF3.81socket 16p
4
KF3.81socket 3p
1
DB25 pin(with Packaging shell )
4
DB9 pin(withPackaging shell )
1
Jumper cap
3
Block slice (rectangular)
1
CD
1
(1)PCI driver
(2)Software operating
instructions
(3)Application software
RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY
Contents
Section 1 Overview.......................................................................................................................................1
1.1 Introdution......................................................................................................................................... 2
Section 2 Installation ..................................................................................................................................5
2.1 Product instruction.............................................................................................................................7
2.3 Systems installation and operation....................................................................................................7
Section 3 Software installation.................................................................................................................... 8
Section 4 Software introduction................................................................................................................11
4.1 Main interface.................................................................................................................................. 12
4.2 Module function...............................................................................................................................12
4.3 Image Acquisition window...............................................................................................................12
4.4 Control Panel....................................................................................................................................12
Section 5 Appendix.....................................................................................................................................17
5.1 Electrical connection with PANASONIC servo system..................................................................... 18
5.2 Electrical connection with YASKAWA servo system.........................................................................18
5.3 Electrical connection with MITSUBISH servo system...................................................................... 19
5.4 Electrical connection with SIMENS V80 servo system.....................................................................21
RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY
1
Section 1 Overview
CONTENTS:
Intriodution
RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY
2
1.1 VisionCut introduction
VisionCut system is designed exactly for Mark cutting. This system is based on the RDC3020G
motion controller. This controller is based on DSP+FPGA and has high performance in motion
control and laser control.
This laser cutting system can interfaces with CO2 tube ,YAG tube and Fiber tube. Servo motor
and step motor can connect to RDC3020G motion controller. RDC3020G has the special IO for
Limit switch and Home switch .
The following is the construction of the VisionCut. Picture 1-2 shows the electrical connections of
the VisionCut in detail.
Picture 1-1: Vision Cutting System
RDV3040-PCIVisionCut operation manual V1.0
SHENZHEN RUIDA TECHNOLOGY
3
Section 2 Installation
CONTENTS:
Product list
Product instruction
Systems installation and operation
Indice
Altri manuali Ruida Technology Controllori
Ruida Technology
Ruida Technology RDC6332G Manuale utente
Ruida Technology
Ruida Technology LFS-ANM-T43 Manuale utente
Ruida Technology
Ruida Technology LFS-ANM-T43-V2 Manuale utente
Ruida Technology
Ruida Technology RDC6442U Manuale utente
Ruida Technology
Ruida Technology LFS-PM-T43 Manuale utente
Ruida Technology
Ruida Technology RDLC320 Manuale utente
Ruida Technology
Ruida Technology BWK301R Manuale utente
