Ryobi OBL1800BL Manuale utente

ORIGINAL INSTRUCTIONS

Brushless Jet

Blower

OBL1800BL

IMPORTANT!

It is essential that you read the instructions

in this manual before assembling, operating,

and maintaining the product.

Subject to technical modication.

Safety, performance, and dependability have

been given top priority in the design of your

brushless jet blower.

INTENDED USE

The cordless blower is intended only for

outdoor use, in dry and well-illuminated

conditions.

The product is not intended to be used by

children or persons with reduced physical,

mental or sensory capabilities.

The product is intended for blowing light

debris including leaves, grass, and other

garden refuse.

Do not use the product for any other purpose.

GENERAL SAFETY WARNINGS

WARNING! When using the product, the

safety rules must be followed. For your own

safety and that of bystanders, you must read

and fully understand these instructions before

operating the product. Keep these instructions

safe for later use.

WARNING! This product is not intended to

be used by children or persons with reduced

physical, mental, or sensory capabilities.

Children should be adequately supervised to

ensure that they do not play with the product.

TRAINING

■Read the instructions carefully. Be familiar

with the controls and the correct use of the

product.

■Never allow children, persons with reduced

physical, sensory or mental capabilities

or lack of experience and knowledge,

or people who are unfamiliar with these

instructions to use the product. Local

regulations may restrict the age of the

operator.

■Keep in mind that the operator or user

is responsible for accidents or hazards

occurring to other people or their property.

■Keep bystanders, children and pets 15 m

away from the area of operation. Stop the

product if anyone enters the area.

■Never use the product while tired, ill or

under the influence of alcohol, drugs or

medication.

PREPARATION

■Some regions have regulations that restrict

the use of the product to some operations.

Check with your local authority for advice.

■While operating the product, always wear

substantial footwear and long trousers.

Do not operate the product when barefoot

or wearing open sandals. Avoid wearing

clothing that is loose-fitting or that has

hanging cords or ties; they can be caught

in moving parts.

■Do not wear loose clothing or jewellery that

can be drawn into the air inlet.

■Secure long hair so that it is above shoulder

level to prevent entanglement in moving

parts.

■Wear hearing protection at all times while

operating the product. The product is noisy,

and may cause permanent hearing injury if

precautions to limit your exposure and to

reduce noise are not strictly adhered to.

■Wear full eye protection at all times while

operating this product. Wear a full face

mask or fully enclosed goggles. Normal

spectacles or sun glasses are not adequate

protection. Objects can be thrown at high

speed by the powerful air jet at any time

and may rebound from hard surfaces

toward the operator.

■Ensure before each use that all controls

and safety devices function correctly. Do

not use the product if the OFF switch does

not stop the product.

■Before each use, always inspect the

housing for damage. Ensure that guards

and handles are in place and properly

secured.

■Return the product to an authorised service

centre to replace damaged or unreadable

labels.

■Never operate the product with defective

guards or shields, or without safety devices

in place.

■Keep all cooling air inlets clear of debris.

■Use rakes and brooms to loosen debris

before blowing.

■Clear the work area before each use.

Remove all objects such as rocks, broken

glass, nails, wires, or string, which can

be blown a considerable distance by high

velocity air.

■Operate the product on a firm, level surface

only.

BATTERY TOOL USE AND CARE

■Recharge only with the charger specified

by the manufacturer. A charger that is

suitable for one type of battery pack may

create a risk of fire when used with another

battery pack.

■Use power tools only with specifically

designated battery packs. Use of any other

battery packs may create a risk of injury

and fire

■When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects that can make a

connection from one terminal to another.

Shorting the battery terminals together

may cause burns or a fire.

■Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

OPERATION

■Operate the product only at reasonable

hours – not early in the morning or late at

night when people might be disturbed.

■Never operate the product in an explosive

atmosphere.

■Avoid using the product in bad weather

conditions especially when there is a risk

of lightning.

■Do not operate the product in poor lighting.

The operator requires a clear view of the

work area to identify potential hazards.

■The use of hearing protection reduces the

ability to hear warnings (shouts or alarms).

The operator must pay extra attention to

what is going on in the working area.

■Do not get distracted and always

concentrate on the task.

■Operating similar tools nearby increases

both the risk of hearing injury and the

potential for other persons to enter the

working area.

■Keep firm footing and balance. Do not

overreach. Overreaching can result in loss

of balance.

■Always be sure of the footing on slopes.

Walk, never run.

■Keep all parts of the body away from any

moving part. Rotating impeller blades can

cause severe injury.

■Never run the product without the proper

equipment attached.

■Do not modify the product in any way or

use parts and accessories which are not

recommended by the manufacturer.

WARNING! If the product is dropped,

su󰀨ers heavy impact, or begins to vibrate

abnormally, immediately stop the product and

inspect for damage or identify the cause of

the vibration. Any damage should be properly

repaired or replaced by an authorised service

centre.

■To reduce the risk of injury associated

with contacting rotating parts, always stop

the product, remove the battery pack, and

make sure all moving parts have come to

a stop:

●before cleaning or clearing a blockage

●when leaving the product unattended

●before installing or removing

attachments

●before checking, maintaining, or working

on the product

●to inspect the product for damage after

striking a foreign object

●if the product starts to vibrate abnormally

(inspect immediately)

■Immediately turn off the product and

remove the battery pack in the event of

accident or breakdown. Do not operate

the product again until it has been fully

checked by an authorised service centre.

WARNING! The product may be supplied

with a harness. Carefully adjust the harness to

comfortably help you in supporting the weight

of the product.

Identify the quick-release mechanism and

practice using it before you start using the

product. Its correct use may prevent serious

injury in the case of an emergency. Never

wear additional clothing over the harness or

otherwise restrict access to the quick-release

mechanism.

BLOWER SPECIFIC SAFETY

WARNINGS

■Wear a face filter mask in dusty conditions

to reduce the risk of injury associated with

the inhalation of dust.

■Slightly dampen surfaces in dusty

conditions.

■Do not point the blower nozzle in the

direction of people or pets.

■Never place objects inside the blower

tubes.

■Do not operate the product near open

windows.

■Use the full blower nozzle extension so that

the air stream can work close to the ground

and perform effectively.

■Do not place the product on top of or near

loose debris. Debris can be sucked into the

intake vent, resulting in possible damage to

the product.

ADDITIONAL BATTERY SAFETY

WARNINGS

WARNING! To reduce the risk of re,

personal injury, and product damage due to

a short circuit, never immerse the product,

battery pack or charger in uid or allow uid

to ow inside them. Corrosive or conductive

uids, such as seawater, certain industrial

chemicals, and bleach or bleach-containing

products, etc., can cause a short circuit.

TRANSPORTATION AND STORAGE

■Stop the product, remove the battery pack,

and allow it to cool down before storing or

transporting.

■Clean all foreign materials from the product.

Store the product in a cool, dry, and well-

ventilated place that is inaccessible to

children. Keep the product away from

corrosive agents, such as garden chemicals

and de-icing salts. Do not store the product

outdoors.

■For transportation in vehicles, secure the

product against movement or falling to

prevent injury to persons or damage to the

product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local

and national provisions and regulations.

Follow all special requirements on packaging

and labelling when transporting batteries by a

third party. Ensure that no batteries can come

in contact with other batteries or conductive

materials while in transport by protecting

exposed connectors with insulating, non-

conductive caps or tape. Do not transport

batteries that are cracked or leaking. Check

with the forwarding company for further advice.

MAINTENANCE

WARNING! Use only original manufacturer’s

replacement parts, accessories, and

attachments. Failure to do so can cause

possible injury, can contribute to poor

performance, and may void the warranty.

WARNING! Servicing requires extreme

care and knowledge and should be performed

only by a qualied service technician. Have

the product serviced by an authorised service

centre. When servicing, use only original

replacement parts.

■You may make adjustment or repairs that

are described in this manual. For other

repairs, contact an authorised service

agent.

■After each use, clean the product with a

soft, dry cloth.

■Check all nuts, bolts, and screws at

frequent intervals for proper tightness to

ensure that the product is in safe working

condition. Any part that is damaged should

be properly repaired or replaced by an

authorised service centre.

■Bring the product to an authorised service

centre to replace damaged or unreadable

labels.

CLEARING A BLOCKAGE

■To reduce the risk of injury associated with

contacting moving parts, always turn off

the product, remove the battery pack, and

make sure that all moving parts have come

to a complete stop.

■Remove the blower tubes to inspect for

blockage. Clear the tubes if required.

■Reinstall the tubes and the debris collector

bag before installing the battery pack and

starting the product.

WHAT’S IN THE BOX

See page 6.

■Blower x 1

■Blower tube x 1

■Battery pack x 1

■Charger x 1

■Manual x 1

SYMBOLS ON THE PRODUCT

Safety alert

Read and understand all

instructions before operating

the product. Follow all warnings

and safety instructions.

Do not expose the product to

rain or damp conditions.

Wear ear protection.

Wear eye protection.

Remove the battery pack

before starting any work on

the product.

Beware of thrown or ying

objects. Keep all bystanders

at least 15 m away.

Rotating Fans. Keep hands

and feet out of the openings

while the product is running.

Regulatory Compliance

Mark (RCM). The product

meets applicable regulatory

requirements.

Waste electrical products

should not be disposed

of with household waste.

Please recycle where facilities

exist. Check with your Local

Authority or retailer for

recycling advice.

SYMBOLS IN THIS MANUAL

Note

Warning

Parts or accessories are sold

separately

WHAT’S IN THE BOX

R18HBLWJ4

x 1

x 1x 1x 1

x 1

x 1x 1

OBL1800BL

Know your product

KNOW YOUR PRODUCT

43 521

7 68

1. Blower tube

2. Tube latch

3. Turbo button

4. Trigger

5. Handle

6. Charger

7. Battery latch button

8. Battery pack

GETTING STARTED

Wear full eye and ear protection, substantial footwear, and

long trousers at all times while operating the product. Do

not operate the product when barefoot or wearing open

sandals.

Insert the blower tube into the product until the tube latch

clicks in place to secure the blower tube.

Install the battery pack. Press the trigger to use the product. Hold the blower with the handle in your right hand, and let

the air stream work close to the ground.

OVERVIEW

p.11

p.12

p.10

Using the blower Cleaning the blower

Storing the blower

OPERATION

USING THE BLOWER

WARNING: Do not use the blower without

the blower tube.

1. Install the battery pack.

2. Press the trigger to use the product. Let

the air stream work close to the ground.

NOTE: Press the turbo button to increase

the speed of air when necessary. Use the

turbo button only when needed to help

conserve battery power.

Indice

Altri manuali Ryobi Soffiatore

Manuali Soffiatore popolari di altre marche

Weed Eater

Weed Eater VS2000BV Manuale utente

KRAUSMANN

KRAUSMANN U37020-00 Manuale utente

Bosch

Bosch ALB 36 LI Manuale utente

Cub Cadet

Cub Cadet HB425 Manuale utente

GreenWorks Pro

GreenWorks Pro BLB482 Manuale utente

ARIETE

ARIETE 2768 Manuale utente

NuTone

NuTone 331H Manuale utente

GÜDE

GÜDE GLB 200 18 Li-Ion Manuale utente

I.VA.CO.

I.VA.CO. SC Series Istruzioni operative

DeWalt

DeWalt DCE100 Manuale utente

Becker

Becker SV 7.330 Manuale utente

Metabo

Metabo AG 18 Pro Manuale utente

Desa

Desa GA3650TB Manuale utente

Echo

Echo Power Blower PB-230LN Manuale utente

Echo

Echo PB-413H Manuale utente

Black & Decker

Black & Decker BV3100 Manuale utente

Haaga

Haaga 355 Manuale utente

Stiga

Stiga SBL 327 V Manuale utente