S-COM 7K Manuale utente

S-COM 7K

Microprocessor Repeater Controller

Version 2.03B

(July 20 1998, updated 25 November 2000)

S-COM Industries

P.O. Box 1546

LaPorte, CO 80535-1546

970-416-6505

www.scomcontrollers.com

[email protected]

Except where otherwise noted, no part of this manual may be duplicated in any form,

whether electronic, mechanical, or otherwise.

Published in the United States of America by:

S-COM Industries

P.O. Box 1546

LaPorte, CO 80535-1546

USA

Limited Warranty

This warranty gives you specific legal rights, and you may also have other rights which vary from state

to state.

Coverage

Except as specified below, this warranty covers all defects in material and workmanship in this product.

The following are not covered by the warranty:

• Damage to, or deterioration of, the external cabinet.

• Damage resulting from lightning, accident, misuse, abuse, or neglect.

• Damage resulting from failure to follow instructions contained in the owner's manual.

• Damage occurring during shipment of the product (claims must be presented to the carrier).

• Damage resulting from repair or attempted repair by anyone other than S-COM Industries.

• Damage resulting from causes other than product defects, including lack of technical skill,

competence, or experience of the user.

• Damage to any unit which has been altered or on which the serial number has been de-

faced, modified, or removed.

Enforcement

This warranty may be enforced only by the original purchaser. The warranty is not transferrable.

Length Of Warranty

For both labor and parts, this warranty will be effective for one (1) year from the date of original

purchase.

What We Will Pay For

We will pay all labor and material expenses for items covered by the warranty. Payment of shipping

charges is discussed in the next section of the warranty.

How You Can Get Warranty Service

Your unit must be serviced by S-COM's Service Department. Please do not return your unit to the factory

without prior authorization. You must pay any shipping charges if it is necessary to ship the product to

service. However, if the necessary repairs are covered by the warranty, we will pay the return

shipping charges to any destination within the U.S. Whenever warranty service is required, you must

present the original dated invoice or a photocopy.

S-COM's liability for any defective products is limited to repair or replacement of the product, at S-COM's

option.

S-COM reserves the right to make any changes in design or additions to, or improvements in, its products

without any obligation to install such additions or improvements in equipment previously sold. S-COM

further reserves the right to replace defective parts under warranty with different or improved parts.

This warranty is expressly in lieu of all other warranties, expressed or implied, including any implied

warranty of merchantability or fitness, and of all other obligations of liabilities on the part of S-COM.

Table of Contents

Selected Tables ...................................................................................................................... xiii

Product Description .......................................... 1-1

Standard Hardware Features.................................................................................................... 1-1

Configuration....................................................................................................................... 1-1

Cabinet................................................................................................................................ 1-1

Main Board.......................................................................................................................... 1-2

Optional Hardware Features ..................................................................................................... 1-2

Telephone Interface Module............................................................................................... 1-2

Speech Synthesis Module................................................................................................... 1-2

Audio Delay Module............................................................................................................ 1-2

Standard Software Features...................................................................................................... 1-2

CW Identifier....................................................................................................................... 1-2

CW Messages and Paging Formats................................................................................... 1-2

Timers................................................................................................................................. 1-3

Repeater Characteristics .................................................................................................... 1-3

Clock and Calendar ............................................................................................................ 1-3

Logic Inputs and Outputs.................................................................................................... 1-3

Command Language .......................................................................................................... 1-3

Getting Started................................................... 2-1

Power ON Initialization .............................................................................................................. 2-1

Initialize Controller............................................................................................................... 2-1

Cold Start............................................................................................................................ 2-2

Warm Start.......................................................................................................................... 2-2

Default Condition ................................................................................................................ 2-2

Programming Fundamentals............................ 3-1

Valid Digit and Time Detection.................................................................................................. 3-2

Control Command Structure...................................................................................................... 3-2

Example Control Command................................................................................................ 3-3

Command Response Messages............................................................................................... 3-4

Acknowledgment................................................................................................................. 3-4

Errors.................................................................................................................................. 3-4

Special Keys.............................................................................................................................. 3-5

Star (*) and Carrier Drop as Terminators............................................................................ 3-5

Pound (#) as Clear or Abort Key......................................................................................... 3-5

DTMF Interdigit Timer ............................................................................................................... 3-6

DTMF Mute Delay ..................................................................................................................... 3-6

Messages............................................................ 4-1

Message Buffer ......................................................................................................................... 4-1

Message Handler ...................................................................................................................... 4-1

Control Characters .................................................................................................................... 4-2

Routing and Unrouting Control Characters ............................................................................... 4-3

Default................................................................................................................................. 4-3

Examples............................................................................................................................ 4-4

Synchronizing Messages and Commands................................................................................ 4-5

CW Messages........................................................................................................................... 4-6

Control Character................................................................................................................ 4-6

7K •

Format................................................................................................................................. 4-6

Pre-Message Delay Character............................................................................................ 4-6

Wordspace Character......................................................................................................... 4-6

Frequency Change.............................................................................................................. 4-6

Speed Change.................................................................................................................... 4-7

CW Alphanumeric Characters............................................................................................ 4-8

CW Punctuation and Related Characters........................................................................... 4-9

CW Frequency Change and Speed Change Characters.................................................. 4-10

Command: Enable/Disable CW ........................................................................................4-11

Command: Select Frequency of CW ................................................................................4-12

Command: Send Next Message Slowly ............................................................................4-13

Command: Select CW Speed ...........................................................................................4-14

Beep Messages....................................................................................................................... 4-16

Control Character.............................................................................................................. 4-16

Format............................................................................................................................... 4-16

Beep Parameters (General).............................................................................................. 4-16

Pre-Message Delay Character.......................................................................................... 4-16

Factory-Fixed-Frequency Beeps....................................................................................... 4-17

Owner-Fixed Frequency Beeps........................................................................................ 4-18

Command: Select Frequency of Owner-Fixed Frequency Beeps .....................................4-19

Custom Beeps .................................................................................................................. 4-21

Custom Beep Delay.......................................................................................................... 4-21

Beep Gap Change Characters.......................................................................................... 4-21

Beep Duration Change Characters................................................................................... 4-22

Automatic Beep Gap ON Character ................................................................................. 4-22

Automatic Beep Gap OFF Character................................................................................ 4-23

Defaults............................................................................................................................. 4-23

Single Tone Page Messages................................................................................................... 4-23

Control Character.............................................................................................................. 4-23

Format............................................................................................................................... 4-23

Delays............................................................................................................................... 4-23

Two-Tone Sequential Page Messages ................................................................................... 4-24

Control Character.............................................................................................................. 4-24

Format............................................................................................................................... 4-24

Delays............................................................................................................................... 4-24

Five/Six-Tone Page Messages ............................................................................................... 4-25

Control Character.............................................................................................................. 4-25

Format............................................................................................................................... 4-25

Delays............................................................................................................................... 4-25

DTMF Page Messages............................................................................................................ 4-26

Control Character.............................................................................................................. 4-26

Format............................................................................................................................... 4-26

Delays............................................................................................................................... 4-26

Defaults............................................................................................................................. 4-26

DTMF Characters ............................................................................................................. 4-27

DTMF Duration Change Characters................................................................................. 4-27

DTMF Custom Duration Change Characters.................................................................... 4-28

DTMF Gap Change Characters........................................................................................ 4-28

DTMF Custom Gap Change Characters .......................................................................... 4-28

DTMF Pause Characters.................................................................................................. 4-29

DTMF Custom Pause Characters..................................................................................... 4-29

DTMF Custom Changes (Duration • Gap • Pause) .......................................................... 4-30

DTMF-Related Notes........................................................................................................ 4-30

DTMF Character Set Tables Explained................................................................................... 4-31

Table of Contents

vii

Examples.......................................................................................................................... 4-31

Synthesized Speech Messages .............................................................................................. 4-33

Control Character.............................................................................................................. 4-33

Format............................................................................................................................... 4-33

Delay Character................................................................................................................ 4-33

Pause Character............................................................................................................... 4-33

Timeout Timer................................................................................................................... 4-33

Synthesized Speech Vocabulary....................................................................................... 4-33

Tone Codes............................................................................................................................. 4-33

Tone Code Table Explained ............................................................................................. 4-34

Calculating Tone Codes.................................................................................................... 4-34

Run-Time Variables................................................................................................................. 4-45

Command: Select Programmable Messages ..........................................................................4-37

Command: Review Programmable Messages ........................................................................4-40

Command: Select/Review/Play User Messages .....................................................................4-41

Command: Send Message ......................................................................................................4-42

Command: Select/Review Command Response Messages ...................................................4-44

Security............................................................... 5-1

Command: Assign Control Operator Password ........................................................................5-2

Command: Assign Master Password ........................................................................................5-3

Command: Assign Control Operator Priviledge Level ...............................................................5-4

Command: Assign Control Operator Priviledge Level to a Range of Commands......................5-5

Command: Enable/Disable Front Panel Display .......................................................................5-6

Macros................................................................ 6-1

Quantity of Macros .................................................................................................................... 6-1

Size of Macros........................................................................................................................... 6-1

Names of Macros...................................................................................................................... 6-2

Contents of Macros ................................................................................................................... 6-2

Sequence of Execution.............................................................................................................. 6-3

Cautions .................................................................................................................................... 6-3

Applications of Macros .............................................................................................................. 6-3

Command: Create New Macro ..................................................................................................6-5

Command: Append To Macro ...................................................................................................6-7

Command: List Macro in CW or Speech....................................................................................6-9

Command: Erase Macro .........................................................................................................6-11

Command: Erase All Macros ...................................................................................................6-12

Command: Rename Macro .....................................................................................................6-13

Command: Pause ....................................................................................................................6-15

Command: Select Power ON-Triggered Macro .......................................................................6-16

Telephone Interface Functions......................... 7-1

Autopatch................................................................................................................................. 7-2

Accessing the Autopatch .................................................................................................... 7-2

Store-and-Forward Operation............................................................................................. 7-2

Dumping the Autopatch ...................................................................................................... 7-3

Autopatch Setup and Configuration........................................................................................... 7-3

Autopatch Dialer ................................................................................................................. 7-3

Examples............................................................................................................................ 7-4

Autopatch Conversation Control......................................................................................... 7-4

Autopatch Dialing Mode ............................................................................................................ 7-5

Command: Select Autopatch Dialing Mode ........................................................................7-6

7K •

viii

Command: Select/Review Autopatch Dialing Message ......................................................7-7

Command: Select/Review Autopatch Error Messages .......................................................7-8

Command: Select/Review Autopatch Dump Message .......................................................7-9

Command: Enable/Disable Autopatch Dialing Mixed-Mode .............................................7-10

Command: Select Pause ("B") Digit Time ........................................................................7-11

Command: Enable/Disable Pound Down (# Dump) .........................................................7-12

Command: Select Dialing Prefix .......................................................................................7-13

Command: Dump Autopatch Using a Code ......................................................................7-15

Command: Select Autopatch Access- and Dump-Triggered Macro .................................7-16

Command: Enable/Disable Full-Duplex Mode ..................................................................7-17

Command: Enable/Disable Autopatch Privacy .................................................................7-18

Command: Enable/Disable Repeater-to-Phone DTMF Mute ...........................................7-19

Command: Enable/Disable ID Messages During Autopatch ............................................7-20

Command: Require Dump Before Next Call .....................................................................7-21

Command: Select Receiver-to-Autopatch-Triggered Macros ...........................................7-22

Command: Landline Hookflash .........................................................................................7-23

Autopatch Timeout Timer........................................................................................................ 7-24

Command: Select Autopatch Timeout Timer ....................................................................7-25

Command: Reset Autopatch Timeout Timer ....................................................................7-26

Command: Select/Review Autopatch Timeout Warning Message ...................................7-27

Autopatch Access and Passwords.......................................................................................... 7-28

Command: Access Autopatch (With Password) ...............................................................7-29

Command: Access Autopatch (Without Password) ..........................................................7-30

Command: Change Autopatch Access Password ............................................................7-32

Command: Enable/Disable Autopatch Access Without Password ...................................7-33

Command: Go Off-Hook ...................................................................................................7-34

Autopatch Call Types .............................................................................................................. 7-35

Command: Select Autopatch Call Types ..........................................................................7-36

Autopatch Restrictions............................................................................................................. 7-38

Uses of Autopatch Restrictions......................................................................................... 7-38

Command: Clear (or Enter) Accepted Number Table ......................................................7-40

Command: Clear (or Enter) Rejected Number Table .......................................................7-42

Autopatch Redialer.................................................................................................................. 7-44

Command: Redial Last Number .......................................................................................7-45

Command: Clear Autopatch Redialer ...............................................................................7-46

Autopatch Call Counter ........................................................................................................... 7-47

Command: Clear Autopatch Call Counter .........................................................................7-48

Command: Send Autopatch Call Count ............................................................................7-49

Phone Line Control Mode..................................................................................................... 7-50

Phone Line Busy Input............................................................................................................. 7-50

Phone Line Busy Output.......................................................................................................... 7-50

Phone Line Answer Modes...................................................................................................... 7-50

Ring-In Delay.................................................................................................................... 7-52

Ringout Limit..................................................................................................................... 7-52

Command: Select Phone Line Answer Mode ..........................................................................7-53

Command: Select (Review) Phone Line Answer Message .....................................................7-54

Command: Select Phone Line Answer Macro .........................................................................7-55

Command: Select Phone Line Dump-Triggered Macro ..........................................................7-56

Command: Select Phone Line Off-Hook Timer .......................................................................7-57

Command: Monitor/Talk Out Via Phone ..................................................................................7-58

Reverse Patch........................................................................................................................ 7-59

Command: Trigger Reverse Patch ..........................................................................................7-60

Command: Answer Reverse Patch .........................................................................................7-61

Table of Contents

Command: Select (Review) Reverse Patch Ringout Message ...............................................7-62

Command: Select Reverse Patch Ring-Triggered Macro .......................................................7-63

Multiple Port Access ............................................................................................................ 7-64

Autopatch Audio Routing ........................................................................................................ 7-65

Autopatch Command Response Message Routing ............................................................... 7-65

Receiver-Specific Autopatch Access ...................................................................................... 7-66

Preventing Multiple Accesses ................................................................................................. 7-66

Command: Select Receiver-Specific Access-Triggered Macros .............................................7-67

Command: Select Command Response Message Routing ....................................................7-68

Clock and Calendar........................................... 8-1

Command: Set Clock and Calendar ..........................................................................................8-2

Command: Adjust Daylight Savings Time .................................................................................8-4

Command: Reset Clock Seconds .............................................................................................8-6

Command: Adjust Clock Seconds .............................................................................................8-7

Scheduler ........................................................... 9-1

Command: Create Setpoint .......................................................................................................9-2

Scheduler Day Code Table ....................................................................................................... 9-3

Command: Delete One or More Setpoints ................................................................................9-6

Command: Enable/Disable Scheduler ......................................................................................9-7

CTCSS Functions ............................................ 10-1

Command: Enable/Disable CTCSS Encoder ..........................................................................10-2

Command: Select Frequency of CTCSS .................................................................................10-3

TS-32 Programming Table ..................................................................................................... 10-4

DTMF Decoder ................................................. 11-1

Command: Enable/Disable Command Response Messages .................................................11-2

Command: Select DTMF Priority/Scan ...................................................................................11-3

Command: Select DTMF Decoder Access Mode ...................................................................11-5

Command: Select DTMF Decoder Interdigit Timer .................................................................11-7

Command: Select DTMF Decoder Mute Delay .......................................................................11-8

Command: Enable/Disable DTMF Decoder Mute ...................................................................11-9

Command: Enable/Disable DTMF Long Tones .....................................................................11-10

Command: Select DTMF Long Tone Macros ........................................................................11-11

Command: Select DTMF Digit-Decoded Macro ....................................................................11-12

Identifier ........................................................... 12-1

Command: Select (or Review) Identifier Messages ................................................................12-3

Command: Select ID-Triggered Macros ..................................................................................12-4

Command: Select ID Message Interval ...................................................................................12-5

Command: Select ID Pending Interval ....................................................................................12-6

Command: Reset Initial ID Message To Normal .....................................................................12-7

Command: Send Initial ID Message ........................................................................................12-8

Command: Select Programmable Tail Messages for Tx1 ......................................................12-9

Command: Select/Review Initial and Normal ID Tail Message .............................................12-10

Command: Enable/Disable ID Messages During Autopatch .................................................12-11

Links................................................................. 13-1

Command: Enable/Disable Path .............................................................................................13-2

Command: Select Audio Routing Priority ................................................................................13-3

Command: Select Path Access Mode .....................................................................................13-4

7K •

Logic Inputs ..................................................... 14-1

Command: Assign Macro To Logic Input ................................................................................14-2

Logic Outputs .................................................. 15-1

Command: Select Logic Outputs .............................................................................................15-2

Receiver Functions.......................................... 16-1

Command: Select Receiver Activity-Triggered Macros

Command: Select Receiver Post-Activity Timers ....................................................................16-2

Command: Select COR Pulse-Triggered Macro

Command: Select Pulse Parameters ......................................................................................16-4

Command: Enable/Disable End-of-Transmission Command Execution .................................16-6

Command: Select From-Start-of-Transmission Timer ............................................................16-8

Transmitter Functions..................................... 17-1

Transmitter Tail Sequence ..................................................................................................... 17-1

Courtesy Delay and Courtesy Message ........................................................................... 17-1

Dropout Delay and Dropout Message .............................................................................. 17-1

Transmitter Timeout Timer and Timeout Message ......................................................... 17-1

Transmitter Unkey Delay ................................................................................................. 17-2

Command: Select Courtesy Delay ..........................................................................................17-3

Command: Select Dropout Delay ............................................................................................17-4

Command: Select Transmitter Timeout Timer ........................................................................17-5

Command: Reset Transmitter Timeout Timer .........................................................................17-7

Command: Enable/Disable Transmitter ..................................................................................17-8

Command: Key Transmitter (Timed) .......................................................................................17-9

Command: Key Transmitter (Untimed) .................................................................................17-10

Command: Enable/Disable Transmitter Minimum Unkey Delay ...........................................17-11

Command: Select Transmitter Minimum Unkey Delay .........................................................17-12

Command: Select Receiver-to-Transmitter-Triggered Macros .............................................17-13

Command: Select Transmitter PTT-Triggered Macros .........................................................17-14

Repeater Functions......................................... 18-1

Command: Select Repeater Access Mode (Path 1) ................................................................18-2

Command: Select Repeater Activity-Triggered Macros

Command: Select Repeater Activity Counter/Timer ................................................................18-4

Command: Select Anti-Kerchunker Parameters .....................................................................18-6

Command: Select Anti-Kerchunk No Hangtime Mode ............................................................18-8

Command: Select (Review) Courtesy Messages ....................................................................18-9

Command: Select Repeater Action-Triggered Macros .........................................................18-11

Base Station Functions................................... 19-1

Command: Enable/Disable Star/Pound Talkout ......................................................................19-2

Command: Select Talkout Transmitter Mode ..........................................................................19-4

Command: Enable/Disable Command Execution on Interdigit Timer .....................................19-5

User Timers ..................................................... 20-1

Command: Select Timeout Value ............................................................................................20-2

Command: Select Timer Event Macro ....................................................................................20-3

Command: Stop Timer ............................................................................................................20-4

Command: Start Timer (Retriggerable) ...................................................................................20-5

Command: Start Timer (One-Shot) .........................................................................................20-6

Example: Fan Control .......................................................................................................20-7

Example: An Activity Timer ...............................................................................................20-8

Indice

Altri manuali S-COM Controllori

S-COM

S-COM S-COM 6K Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente