Safety Vision OBSERVER 4100 Manuale utente

OBSERVER™ 4100

USER GUIDE

OBSERVER 4100 USER GUIDE

Important Notices

Title: Observer™4100 User Guide

Firmware Version: X3-4-T642681

Document Version: 2.3

Safety Vision attempts to provide information contained

in this manual based on the latest product information

available at the time of publication. However, because of

Safety Vision’s policy of continual product improvement,

Safety Vision reserves the right to amend the information in

this document at any time without prior notice.

This material is condential and the property of Safety

Vision. It is shared with your company for the sole purpose

of helping you with the operation of the described

equipment.

Safety Vision makes no warranty of any kind with regard

to this material, including, but not limited to, the implied

warranties of merchantability and tness for a particular

purpose. Safety Vision shall not be liable for errors

contained herein or for incidental or consequential damages

in connection with the furnishing, performance, or use of

this material.

Safety Vision expressly disclaims all responsibility and

liability for the installation, use, performance, maintenance,

and support of third-party products. Customers are advised

to make their independent evaluation of such products.

No part of this document may be photocopied, reproduced,

or translated to another language without the prior written

consent of Safety Vision.

Safety Vision® is a registered trademark of Safety Vision, LLC. All

other products or name brands mentioned in this document are

trademarks of their respective owners. For more information

about Safety Vision and its products, go to www.

safetyvision.com or call 800-880-8855.

OBSERVER 4100 USER GUIDE 1

Table of Contents

Components 2

SD Card Insertion 3

Installation 5

Flat Mount 5

Panic Button (Part #SV-4100-PANIC) 5

Lock Box (Part #SV-4100LB) 6

Remote Control 8

Live View 10

Menu Navigation 10

Video Playback 11

Exporting Video Files 13

Conguration 14

System Menu 14

Record Menu 22

Network Menu 31

Event Menu 36

Peripheral Menu 45

System Information 47

Appendix A: Web Application Manager 51

Appendix B: Specications 54

Appendix C: Recording Time Calculator 55

Appendix D: Dimensions 56

2OBSERVER 4100 USER GUIDE

Components

1 - USB Port - Insert a USB ash drive to

download events quickly without having to

remove the Secure Digital (SD) card.

2 - External Monitor Output - Attach an

external monitor to the Observer 4100 with an

RCA plug here to congure the mobile digital

video recorder (MDVR).

3 - Door Lock - The Door Lock secures the

door over the SD card slot for security.

4 - SD Card Slot - Insert an SD card into the

slot behind the door until it clicks. To remove

the SD card, briey press it in until it ejects.

5 - SD Card Slot Door - The SD Card Slot Door protects

the SD card from contaminants and damage.

6 - Status LEDs - The Status LEDs illuminate to display the

current status of the Observer 4100.

- Flashes when the SD card is being accessed.

- An error may have occured.

- The GPS LED illuminates when the GPS module is

searching for a signal; it then ashes steadily when locked

on.

- The unit is interfacing with an optional Ethernet device.

- The unit is receiving power.

- The unit is recording video.

- One or more cameras have become detached or are

malfunctioning.

- An alarm has occured (as congured in the

Conguration Menu).

For further information regarding the

conguration of the Observer 4100,

see the Conguration chapter.

OBSERVER 4100 USER GUIDE 3

SD Card Insertion

To insert an SD card into the Observer

4100:

1. Insert the key and turn it

counterclockwise.

2. Push the SD card slot door rmly to

the right.

3. Insert an SD card into the Observer

4100 label-side up, with the notch to the

right, until it clicks in place.

4. Push the SD card slot door to the left

rmly and conrm it is closed all the way.

5. Insert the key and turn it clockwise to

lock the door.

Do not force the SD card into the

Observer 4100 upside down or

backwards.

To remove the SD card, follow the

procedure above, press the card into the

slot until it clicks, then allow it to spring

out.

Do not remove the SD card until the

Observer 4100 is turned o.

Important Notice: Proper maintenance procedures for

digital media require that recorded data be reviewed on

a regular basis to ensure the DVR is operating correctly.

Consult with your eet or vehicle maintenance manager

to implement a regular data review policy that ts with

your facility routines to ensure data integrity.

4OBSERVER 4100 USER GUIDE

WIRING HARNESS CONNECTIONS

Recommended Sensor Connections (12V)

Sensor 8 Stop Arm Lights (school bus)

Sensor 7 Amber Warning Lights (school bus)

Sensor 6 Door (or wheel chair lift)

Sensor 5 Head Lights

Sensor 4 Event Button (see note)

Sensor 3 Brake Lights

Sensor 2 Left Turn Signal

Sensor 1 Right Turn Signal

Power Harness

Red Power (12 - 32V DC)

Black Ground

White Ignition (Yellow on some models)

Table A

Cable Length

SVS-3MMF 10’

SVS-5MMF 16’

SVS-10MMF 33’

SVS-15MMF 49’

SVS-20MMF 65’

Table B

Cable Length

SV-4100-10-CBL 10’

SV-4100-20-CBL 20’

SV-4100-35-CBL 35’

SV-4100-50-CBL 50’

Note:

After connecting a Panic Button or CP3/4

monitor, they must be congured in the

Settings > Peripheral > Ext. Com. Setup

menu. Select the accessory in the eld for

the appropriate COM connection.

OBSERVER 4100 USER GUIDE 5

Installation

Flat Mount

Secure the MDVR to the surface with self-

tapping screws or rivets.

Ensure that the front panel of the MDVR

remains accessible and there is a minimum

2.5 inches of clearance for cables.. Do not

install the Observer 4100 in an area of the

vehicle cabin that could interfere with the safe

operation of the vehicle.

Panic Button (Part #SV-4100-PANIC)

An optional panic button module is available.

The panic button provides an additional status

LED display, remote control sensor, and external

monitor output in addition to the panic button.

When the panic button module is installed,

ensure the following settings are congured

properly:

1. In the Settings menu, select Peripheral,

then Ext. Com. Setup. Select PANIC

BUTTON in COM4.

2. Ensure the panic button module is

connected to the 485A-2 and 485B-2

terminals.

3. In the Settings menu, select Event, then

“Emergency Alarm” (Alarm of Panic Button

screen). Select ON in the EN (enable) and ALARM elds.

4. Ensure the module is connected to ground and 5V.

6OBSERVER 4100 USER GUIDE

Lock Box (Part #SV-4100LB)

Use the following procedure to install the

Observer 4100 in the SV-4100LB Lock Box::

1. Open the front door.

2. Use a T15 security bit to remove the

screw centered underneath the door

hinge.

3. Push the lid to the rear and lift it up to

remove it.

4. Mount the lock box to a at surface using

secure mounting hardware through the

six open holes in the bottom of the lock

box (three near the front, three near the

rear).

5. Ensure the power and ground leads for

the auxiliary fan are threaded through

the cable passage in the rear.

6. Attach the power and ground leads to

the +12V and GND terminals respectively

on the Observer 4100 terminal block.

(The terminal block remains on the

outside of the lock box.)

7. Thread all cables that will be connected

to the Observer 4100 through the

cable passage and connect them to the

Observer 4100.

It is easier to attach cables to the back of the

Observer 4100 before it is secured in the lock

box.

OBSERVER 4100 USER GUIDE 7

8. Place the Observer 4100 in the lock box

over the raised screw holes and secure

it using the included screws.

9. Replace the lid and push it rmly

forwards, ensure the tabs in the rear

engage the back of the lock box.

10. Use a T15 security bit to replace the

central screw under the hinge.

8OBSERVER 4100 USER GUIDE

CP3 Monitor CP4 Monitor

Indice

Altri manuali Safety Vision Registratore digitale

Safety Vision

Safety Vision OBSERVER 4120 Manuale di installazione

Safety Vision

Safety Vision OBSERVER 4401-HVR Manuale di installazione

Safety Vision

Safety Vision RouteRecorder 4C SD SS Manuale utente

Safety Vision

Safety Vision ROADRECORDER 8000 Istruzioni operative originali

Safety Vision

Safety Vision RoadRecorder 9000 Manuale utente

Safety Vision

Safety Vision OBSERVER 4816-NVR Manuale di installazione

Safety Vision

Safety Vision OBSERVER 4112 HVR Manuale utente

Safety Vision

Safety Vision Observer 4000 Manuale utente

Safety Vision

Safety Vision RoadRecorder 7000 Manuale utente

Safety Vision

Safety Vision SV-1600 Manuale utente

Safety Vision

Safety Vision SVR-4100 Manuale utente

Safety Vision

Safety Vision OBSERVER 4100 HVR Manuale utente

Safety Vision

Safety Vision OBSERVER 4116 Manuale di installazione

Safety Vision

Safety Vision OBSERVER 4120 Manuale utente

Safety Vision

Safety Vision SV-1000 Manuale utente

Safety Vision

Safety Vision SVR-4401-3C Manuale utente

Safety Vision

Safety Vision ICOP PRO HD HVR Manuale utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente