Safety Vision TOTALVIEW HD Manuale utente
TOTALVIEW HD
USER GUIDE
Important Notices
Title: TOTALVIEW HD User Guide
Document Version: 1
Revision: 0
Safety Vision attempts to provide information contained
in this manual based on the latest product information
available at the time of publication. However, because of
Safety Vision’s policy of continual product improvement,
Safety Vision reserves the right to amend the information
in this document at any time without prior notice.
This material is condential and the property of Safety
Vision. It is shared with your company for the sole purpose of
helping you with the operation of the described equipment.
Safety Vision makes no warranty of any kind with
regard to this material, including, but not limited to,
the implied warranties of merchantability and tness
for a particular purpose. Safety Vision shall not be
liable for errors contained herein or for incidental
or consequential damages in connection with the
furnishing, performance, or use of this material.
Safety Vision expressly disclaims all responsibility and
liability for the installation, use, performance, maintenance,
and support of third-party products. Customers are advised
to make their independent evaluation of such products.
No part of this document may be photocopied,
reproduced, or translated to another language
without the prior written consent of Safety Vision.
Safety Vision® is a registered trademark of Safety Vision,
LLC. All other products or name brands mentioned in this
document are trademarks of their respective owners. For
more information about Safety Vision and its products, go to
www.safetyvision.com or call 800-880-8855.
1TOTALVIEW HD USER GUIDE
CONTENTS
Product Features 2
Main Wiring Diagram 3
Remote Control 4
User Interface
Log In Interface 5
Password Reset 5
Main Menu Interface 6
System 7
Clock 8
AVM 8
AVM Option Setup 9
Import Calibration Files 9
Export Calibration Files 9
Change Vehicle Image 10
Information 10
Hardware Installation
Wiring of the Vehicle Body 11
Camera Installation 11
Control Box Installation 11
Calibration Mats 12
Software Calibration 13
Appendix A: Specications 16
Appendix B: Dimensions 17
FCC Compliance Statement 18
TOTALVIEW HD USER GUIDE 2
Product Features
• Four (4) 190° full HD 1080p wide-angle sheye
cameras, horizontal view angle >170° (8 channel inputs
maximum)
• Split screen to show 360° view and rear view OR 360°
view and front view as default.
• Dual-core ARM Cotex-A9 and built-in high
performance H.264 video encoding / decoding allow
for composite seamless, high accuracy images.
• Analog CVBS video output.
• Simple calibration procedures with automatic image
stitching.
• High denition 1080p HDMI video output.
3TOTALVIEW HD USER GUIDE
Main Wiring Diagram
TOTALVIEW HD USER GUIDE 4
Remote Control
1 - POWER - Turn on / o video display on or o.
2 - 0-9 - Input numbers.
3 - CLEAR - Delete a character.
4 - Navigation Keys - Use the left, right, up, and down keys
to navigate menus, move the cusor, or shift the image.
Press the center key to enter a command.
5 - ESC - Exit out of the main menu interface.
6 - SHIFT - Shift current channel to full screen display or exit
from full screen display. In the main menu interface it’s
used for switching the menu selection.
7 - MENU - Display the main menu.
Note: 2 AAA batteries are not included with remote control.
Important: Remote control is necessary to configure system if a
touchscreen monitor is not used.
5TOTALVIEW HD USER GUIDE
User Interface
Log In Interface
Input Password
Enter an alphanumeric password.
The default password should be
changed after stitching is nished.
The default password is 000000.
Note: If the password is forgotten, input
“root” to log in. Select factory default
setting in the Information menu. The
new password will be 000000.
Log In
After the password is entered, click
the Log In icon to log into the system.
Password Reset
Click the Password Reset icon to
change the current password.
Back
Click the Back icon to return to the previous menu.
Password Reset
The password reset screen provides access to
change the current password.
• Current: enter the current password
• New: enter the new password
• Confirm: conrm the new password by
entering it again.
• : save the current settings
TOTALVIEW HD USER GUIDE 6
Main Menu Interface
• System: basic function
setting
• Clock: system time setting
• Storage: storage function
and system log management
• DVR: Under development
• AVM: 360 panorama
calibration and related
operation
• Player: Under development
• Information: upgrade
operation and local IP setting
• Radar: Under development
Note: 0-9 numeric keys on remote control may be used to select
options in the menu (e.g. , press 5 to select AVM).
7TOTALVIEW HD USER GUIDE
System
• Standby Delay: time frame
can be set for standby
• AV: select color encoding
system
◦NTSC: 1080p / 60 frames
per second (fps)
◦PAL: 1080p / 50 fps
• Full Pannel AVS: Under
development
• Surround View Region:
select surround view size
◦Small
◦Normal
◦Large
• Language: Under development
• Slow Wakeup: Under development
• View Ratio: display ratio between birds eye view and
single view
◦1:2
◦2:3
◦1:1
• Front Cursor: front view cursor selection
• Surround View Mode: surround view mode selection
• UART Function: Under development
TOTALVIEW HD USER GUIDE 8
Clock
Click on the right / left arrows at the top of the
screen to scroll through month and year options.
Select the date by clicking today’s date on the
calendar. Click the up / down arrows at the bottom
of the screen to adjust the current time.
Once current time and date have been selected,
click the Save icon to save any changes. Then click
on the Back icon to return to the main menu.
AVM
The elds in the AVM Calibration
menu will be automatically populated
when calibration les are imported.
• Length: the total length of the
calibration mats from front to
back of vehicle centimeters
• Width: the total width of the
calibration mats from the left
side to right side of vehicle in
centimeters
• Chess Position: panoramic
stitching parameter
• Grid Size (in centimeters):
◦If using the 1.2m calibration
mats: 20
◦If using the 1.8m calibration mats: 30
• Blending Angle: panoramic stitching parameter
• : enter calibration mat setting menu
• : enter image stitching menu
• : enter AVM Option Setup
Indice
Altri manuali Safety Vision Sistema di sicurezza
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente