Sagem F@st 3102 Manuale utente

ANGLOPACK

Quick Setup Guide

Required configuration

- A standard line: non-shared analog (excluding “Numeris” and switchboard)

- A subscription to the ADSL service AngloPack from Teleconnect

- A standard telephone (optional)

- A computer with the following characteristics:

• P running Windows 98SE, 2000, Me, XP, Vista, Seven

• Memory: 512 MB minimum, 1 GB recommended

• An Ethernet port (preferred)

• Wi-Fi (optional)

Apple computers running Mac/OS or computers running Linux are not supported.

Replace the dashes with your France Telecom telephone number

ADSL Username

_ _ _ _ _ _ _ _ _ _

@budget.btadsl

ADSL Password

_ _ _ _ _ _ _ _ _ _

It works though but our technical support is not guarantee in this case

Sagem F@st 3102 modem

In your package you will find:

Telephone cable RJ11 X 1

Connector RJ11 male/male, Grey

Female telephone adaptor X 1

Telephone socket adaptor / RJ11 female, Beige

Ethernet cable RJ45 X 1

Connector RJ45 male/male, Yello

External ADSL filter X 1

Adaptor Male/femelle / RJ11 female

Your i-Fi box X 1

Sagem F@st 3102 modem/router

Electrical power supply and cable X 1

Transformer 220V

Telephone cable RJ11 X 1

Connector RJ11 male/male

Installation

1/ Configure your PC network

•

T e Internet Protocol properties must be set to t e following :

- obtain an IP address automatically

- obtain a DNS address automatically

•

To configure t e network on your PC, please c eck your computer

users’ guide.

/ Connect your equipment

•

As described in t e « wiring diagram » enclosed on page 4

•

W en t e cabling is complete, t e auto-configuration will launc

automatically. Please be patient and do not touc anyt ing before

t e lig t @ is green and steady and t e lig t is on (t is s ould

take about 5 min)

3/ Login procedure

•

The login information will normally be auto-configured in

your box, and you will be connected to the Internet

automatically.

•

However, in a few cases, your ADSL login details may be

requested (particularly after a box RESET). In t is case, please

enter t em, as stated on page 1 of t is guide and follow t e

instructions :

Access the box configuration interface

•

To do so, please open Internet Explorer (or anot er Web browser)

- in the address bar, please type in :

http://19 .168.1.1

- a login dialogue window will appear.

- please enter the following information :

user

(no pass ord)

Then select: Point-to-Point Protocol over Et ernet (PPPoE)

Enter then your login details as stated in page 1, in the

corresponding fields (User Name & Password):

Note

: VPI must have a value of 8 and VCI must have a value of 35.

Validate by clicking on

iring Diagram

BOX

Main

Telephone

socket

BOX

(REAR FACE)

le RJ11

cable

ON/

OFF

PWR

REG

ETH1 ETH2

ADSL

RST

During an electrical storm

disconnect the box from the

mains and telephone socket

Electric

Socket

DSL

ETH1

Male RJ45

Ethernet

Cable

Please ensure you have connected

the ADSL filter provided to your

telephone socket. or Wi-Fi (no cable) if enabled

on both the modem & your

computer

S ould you wis to connect a second p one, you will need to do so on a

second wall socket, using anot er ADSL filter (not provided).

Please do not esitate to ask our tec nical support and/or customer service

for elp & connection validation.

A SL

filter

Second

telephone

socket

i-Fi configuration (optional)

For your convenience, the Wi-Fi interface of your

box is enabled by default. However, you may

choose to enable/disable it. To enable/disable

Wi-Fi, please follow the instructions here below:

1/ Access the box configuration interface:

•

To do so, please open Internet Explorer (or any similar Web

browser)

- in the address bar, please type in :

http://19 .168.1.1

- a login dialogue box will appear.

- please enter the following information :

user

(no pass ord)

/ Enable/disable Wi-Fi

•

In t e interface, please click on “wireless network”, in t e left and

side menu. T en click on ” SSID1”, select t e status “Enabled” or

“Disabled” on t e drop down menu.

•

Validate by clicking on

3/ Follow the Wi-Fi instructions of your PC

•

You will also need to configure t e Wi-Fi device of your computer.

As t ese devices are different on eac computer, we advise you

to refer to your computer user guide or to contact t e tec nical

assistance of its manufacturer s ould you ave any doubt.

•

Please connect to t e wireless network named "FAST3102 -

xxxxxx"

(where xxxxxx is an alphanumerical reference particular to each box)

•

During t is process, you will be asked for a WPA encryption key.

T is key is printed underneat your router. Please type in t is key

carefully in uppercase wit out any dots or spaces.

hat to do if a problem arises?

Event Test procedure or possible cause

The Power light is off

Please check that the power supply block is properly plugged in.

Check that the power supply cable is properly connected to your router.

Check that the electrical socket is in working order by plugging a different device into.

Check your fuse box and your central electricity supply.

I can t connect to the Internet in Ethernet mode Please check that the Ethernet cable is properly connected to your computer and to your box.

Check that your computer is properly configured to enable Internet access (network configuration menu).

I can t configure my Modem in Wi-Fi mode By default the Wi-Fi is active. However, it may have been deactivated for some reason. In this case, you need to activate it again

through the box interface.

I can t connect in Wi-Fi mode Please check that the encryption WPA key has been entered as it is written underneath the box respecting uppercase and without

any spaces.

Wi-Fi is configured properly but I still can t connect in

Wi-Fi mode

Please check that the box is in working order (lights on), that your computer s Wi-Fi adaptor is set to WPA encoding and TKIP/AES

encryption and that you have properly entered the WPA key as stated underneath your box. You can also try to move your

computer closer to the box. If Wi-Fi does not work in your house, please check our powerline solution on www.budget-boutique.com

I can t connect several computers to the box Please check that each new computer is connected properly to the box (by Ethernet or Wi-Fi) and that the method used is correctly

configured on each computer.

I can t surf on the Internet Please reboot the box using the ON/Off switch at the back of the box.

My internet pages “freeze” Reboot the box using the ON/Off switch at the back of the box.

When I pick up the telephone, I hear a loud buzz You probably have not placed an ADSL filter on your main or secondary telephone wall socket.