2
Introduction
This product is a high-performance micro-stepping driver.
•Smooth driver
By using micro-stepping, this driver can achieved low-vibration and low-noise.
•Built-in overheat protection
A driver’s internal temperature in excess of 70˚C (158˚F) trigger overheat
protection, and the driver will stop working automatically.
•Adjustable operating current
A digital switch adjusts the level of motor current during operation.
•Bio-polar drive
By using bio-polar drive, this driver is powerful than uni-polar driver and only
needs four wires connected to the stepping motor.
•Automatic reduce current
In the stop state, the driver will reduce the current automatically to limit the heat
generated by the motor and driver.
Specifications
Min Typical Max
Supply Voltage (VDC) 24 36 50
Output Current (Arms)1.0 - 4.2
Logical Input Current (mA) 7 10 16
Input Frequency (KHz) 0 - 200
Low-Active Required Time 2.5 - -
Operation
Environment
Ambient
temperature 0 to +65˚C (+32 to +149˚F) (non-freezing)
Humidity 80% or less (non-condensing)
Surrounding
atmosphere No corrosive gas, dust, water or oil
Storage
Environment
Ambient
temperature -10 to +80˚C (+14 to +176˚F) (non-freezing)
Humidity 80% or less (non-condensing)
Surrounding
atmosphere No corrosive gas, dust, water or oil
Vibration 5.9 m/s
