Sakar 11199 Manuale utente

- 1 -

11199 KeyChain Digital Camera

Owner’s Manual

Windows and the Windows logo are registered trademarks of Microsoft Corporation.

All other trademarks are the property of their respective.

- 2 -

Contents

Profile 2

Overview 2

Product Package Contents 2

System Requirements 2

To know Digital Camera 2

Install Battery 3

Software Installation 4

Take Photos 8

Camera Functions Control 9

Download Photos 11

CapturingAVI 16

Video Conference 18

Appendix1: Specifications 18

Appendix2: Answers of frequent asked questions 19

- 3 -

Profile

Overview

Thank you for purchasing the11199 Keychain digital camera. It not only can

take photos but also has the built-in PC camera functions. This camera is

equipped with a 16MB SDRAM: if you want the photos in the camera to be

download to your computer, you are only required to connect the USB cable to

your computer and your camera; It is also possible to use the built-in PC camera

to hold a video conference via the internet, enabling you to have a face to face

online conversation with others.

Product Package Contents

●Digital Camera ●User’s Manual

●Software CD ●USB cable

System Requirements

Win98SE/2000/XP

125MB free hard disk space or above, 32MB or more RAM

Available USB Interface and CD-ROM

Color Monitor (Suggest at least 800*600 24 bit or above)

To Know Digital Camera

A. Shutter button

B. LCD

C. Lens

D. Viewfinder Button

E. USB Socket

F. Hanging Strap Hole

- 4 -

G. Start/Function Key

H. Battery Box

Install Battery

1. Open the battery box.

2. Load the batteries correctly: when you load the batteries, please place one

battery according to the pole directions for batteries on the battery box;

3. Close the battery box cover.

Note:

1. When you use the USB cable to connect the camera with a computer, is

unnecessary to use the batteries because the camera use the power provided by

the computer through the USB interface.

2. Before you use the PC camera functions, please download all photos in

the camera to your computer, which will avoid pictures missing

3. Please pay attention to that the reasonable distance between you eyes and

viewfinder is about 30cm

Warning

1. Don’t open the battery box at will, and the power cut will cause the photos

in the camera missing.

2. If you don’t use the camera for a long time, please take out of the batteries

for fear of the discharging or corrosion of the batteries;

3. Please don’t put the battery into fire for fear of explosion to cause

4. When the power of battery lower 1.2V,the symbols in LCD will flash

indicating the power shortage

- 5 -

Automatically enter the energy saving status

In order to save the energies of batteries, if the camera is not used in 30s,the

camera will auto enter the energy saving status.

Software Installation

IMPORTANT: Before attempting to install the software, make sure that

you do not have the camera or the USB cable attached to your computer.

This will affect the install process and will cause your installation to fail.

Do not connect the cable to the computer until the entire installation

process has been completed. We suggest you follow the step by step

instructions that will appear on your screen during the installation process.

SECTION ONE- Software & Camera Driver Installation

1. Insert the CD into your CD-Rom drive. Make sure that your camera is not

connected to the computer.

2. For WIN 2000 or WIN XP operating systems - On the “Install your

camera software” screen, select your camera model from the drop down

list and click the “Install” button to install PhoTags Express followed by

the installation of PhoTags WebCam Express and your camera driver.

For WIN 98SE operating system- On the “Install your camera software”

screen and follow these instructions:

1. Click the “DirectX” button and follow the installation instructions,

restart your computer after the installation

2. Insert the CD into your CD-Rom drive. Make sure that your camera

- 6 -

is not connected to the computer.

3. On the “Install your camera software” screen, select your camera

model from the drop down list and click the “Install” button to install

PhoTags Express followed by the installation of PhoTags WebCam

Express and

3. On the “PhoTags Express" screen, click the “Next” button.

4. Please review the license terms and click the “Agree” button to continue.

- 7 -

5. Let the “PhoTags Express” installer create the folder where the program

will be installed to, and then click “Install”

6. Click “Finish” to let the “PhoTags Express” installer finish the installation

program.

- 8 -

7. This will automatically launch the Install shield for the camera driver.

Click “Next” to continue.

8. Once the program has finished installing you will have to restart your

computer.

- 9 -

9. Congratulations!!You have successfully installed the “PhoTags Express”

software, the “PhoTags WebCam Express” and the Camera driver.

SECTION TWO: Take photos

Please be sure that the power of the batteries is enough before you use this

camera to take photos. If you want to take photos, please:

1. Press function button to open the camera and the LCD will be lightened.

2. Use the viewfinder to find the things for which you desire to take photos;

3. Hold the camera steadily, and press the shutter button to take photos

4. When you hear the buzzer beeps once, which indicates you have already

taken a photo, and you can go on taking photos;

5. When the camera is fully loaded with photos, the buzzer will give out

continuous beeps sound for alarm.

Prompt:

1. When taking photos, please hold camera steadily

2. The shortage of rays will reduce the quality of picture

- 10 -

Camera Functions Operation

The function operation of the camera shall be conducted under the working state.

If the camera is in energy saving mode, please press Function button once to

start the camera and let it into the working state, and then conduct the following

operation.

Auto-shoot mode

1. Press the Function button to select shown on LCD display;

2. Press the shutter button within 5 seconds to activate the 10 seconds timer.

The digital camera will beep once every second.

3. After 10 seconds, the camera will beep twice indicate that the photos has

been taken.

Continuous Shoot Mode

AVI Capture

1. Press the Function button to select shown on the LCD display;

2. Press shutter button within 5 seconds activate the continuousAVI capture

mode and do not release the shutter button until you want to stop shooting.

3. The camera will beep once for each photo taken till shutter button

released or the memory is full.

Continuous 3 Capture

1. Press the Function button to select “C5” shown on the LCD display;

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente