SALICE F70 Clips Manuale utente
CANADA
F70
2
INDEX
Slide installation page 7
Technical information page 8
Part number composition and packing page 11
F70 SMOVE page 23
Runner for drawers with decelerated closing for side thicknesses up to 16 mm
F70 PUSH page 27
Runner for drawers with Push opening system for side thicknesses up to 16 mm
F70 CLIPS/LOCKING DEVICES page 13
F70 ADJUSTMENTS page 17
ACCESSORIES page 31
F70 Push Synchronizer page 32
Drawer drilling templates page 35
Tilt adjustment lever page 37
Fixing screws and pozi driver page 37
3
F70
F70 is the new Salice heavy-duty high-capacity drawer runner. It can be used with both wood drawers and Lineabox aluminum
drawers.
The 500 mm length F70 has successfully completed the extremely demanding static and dynamic tests*required for the
certication of its load capacity up to 70 Kg thus demonstrating its high levels of performance, its extreme versatility and
adaptability to any furniture application.
This runner is available in the Smove version, characterized by decelerated closing and in the Push version for all handle-less
drawers. The Push version can be equipped with a synchronization system that allows the opening of drawers of any width.
Applying pressure on any part of the drawer front (even at the extremities), is sufcient for the Push devices to release and
consequently for the drawer to open.
Both versions are available in the full range of lengths from 350 mm to 750 mm in 50 mm increments.
All versions and lengths of F70 have an integrated rack and pinion system, which synchronizes the three sliding elements of the
runner and guarantees excellent lateral stability and a perfectly silent sliding movement without the need for further components.
F70 is equipped with direct and intuitive tool-free adjustment of side, depth, height and tilt of the drawer front.
Its features and distinctive elements make F70 a complete runner, suitable to meet all needs and usable in a wide variety
of furniture and room settings: from the kitchen to the bathroom, as well as living spaces, bedroom, ofce, and wherever
a versatile product is needed with extreme durability and high load-bearing capacity.
* Per Ansi BHMA A156.9-2020 Grade 1 standard in a frameless cabinet using a 18’’ (457 mm) runner length and a recommended number
of xing screws.
In the Smove version, the F70 runner is equipped with a fully
integrated soft close system that decelerates the closing
action of the drawer.
Smove
50 mm
Smove
4
The F70 runner is also available with integrated Push opening
system, for all handle-less drawers. A slight pressure of the
drawer front is sufcient for the Push mechanism to release
and consequently for the drawer to self-open with minimum
effort.
The synchronization system optimizes the opening movement of wider drawers.
Even a slight pressure at the extremities of the drawer front opens the drawer quickly and easily.
Synchronizer for F70 Push runners (Optional)
5
F70
Clip
Fixing clip with stamped steel components giving direct and
intuitive tool-free side and depth adjustment of the drawer
front.
The adjusters for height and tilt (optional) of the drawer
front are located on the runner.
Rack and pinion system
All versions and lengths of F70 have an integrated rack and
pinion system, which synchronizes the three sliding elements
of the runner and guarantees excellent lateral stability and a
perfectly silent sliding movement without the need for further
components.
6
10 9 9
37
9 32
9.5
99 9
14
32
Setback 2
12
ø7
ø 6.3
0
-0.2
ø7 +0.5
-0.2
ø 4
ø 6.3
38
Screws, see page 37
Mounting full-extension runner on the cabinet side
Fixing
The oval slots on the runners enable a depth adjustment of +/- 4.5 mm and a height adjustment of +/- 6 mm to be made.
These adjustments are in addition to those incorporated in the xing clips and in the runner (Adjustments, see page 17).
EUROSCREW
Pre-drilling ø 5 mm
If runners are mounted before the assembly of the cabinet, we recommend that the inset position of the runner be increased from 38 to 39 mm
to accommodate the manufacturing tolerances in the cabinet and the runner.
+/- 4.5
+/- 6
+/- 4.5
+/- 6
7
Drilling positions for runner on cabinet side
The use of at least 4 fixing screws for
each runner to the cabinet side is highly
recommended.
Load capacity may vary on longer lengths.
350
400
450
500
550
600
650
700
750
2350
38
10
37
MIN 360
MIN 410
400
38
37
450
MIN 460
37
14
500
37
550
37
MIN 560
MIN 510
12
64
MIN 610
37
MIN 660
600
650
37
64
MIN 710
37
700
750
MIN 760
37 416
416
10
38
10
383838
38
38
38
10
10
10
10
10
10
14
32 32
32
32
416
96
320
320
320
256
256
256
88
49
65
103
8
Abbreviations
SP = Drawer side thickness
LC = Drawer depth
PM = Cabinet depth
X= Cabinet internal width
LN = Nominal runner length
The external drawer depth is 10 mm
less than the runner length
The internal width of the drawer is 42 mm to 43.5 mm
less than the internal width of the cabinet
Drawer setting
Nominal runner length
mm External drawer depth
mm
350 340
400 390
450 440
500 490
550 540
600 590
650 640
700 690
750 740
X
PM
SP 16 mm MAX
LN
LC
X - 42 mm to - 43.5 mm
X - 42
LC = LN - 10
9
LN - 10
ø 6x10 7
95 mm MIN
11
LN - 10
ø 6x10 7
11
A
A
REAR HOOK REAR NOTCH with Smove
and Push runners REAR NOTCH with Push
Synchronizer and
tilt adjustment lever
Use SGD704UGXA drilling template for rear hook,
see page 35.
3-SIDED drawer
4-SIDED drawer
F70 Push Synchronizer, see page 32.
AGLRXX3F Tilt adjustment lever,
see page 37.
Drawer drilling
40 mm MIN rear notch 75 mm MIN rear notch
LN - 10
ø 6x10 7
95 mm MIN
11
LN - 10
ø 6x10 7
11
A
A
11
ø6x 10
13 MAX
7
11
ø6 x 10
13 MAX
7
11
ø6x 10
13 MAX
7
11
ø6 x 10
13 MAX
7
A
10
Altri manuali per F70 Clips
3
Indice
Altri manuali SALICE Serratura
