Salton Elite SB900E Guida all'installazione

INSTRUCTIONS AND WARRANTY

MODEL: SB900E

SALTON FOOD PROCESSOR

Congratulations on purchasing our Salton Elite Blender. Each unit is manufactured to

ensure safety and reliability. Before using this appliance for the first time, please read

the instruction manual carefully and keep it for future reference.

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety precautions should always be followed

including the following:

1. Please read the instructions carefully before using this appliance.

2. Always ensure that the voltage on the rating label corresponds to the mains

voltage in your home.

3. Incorrect operation and improper use can damage the appliance and cause injury

to the user.

4. The appliance in intended for household use only. Commercial use invalids the

warranty and the supplier can not be held responsible for injury or damage

caused when using the appliance for any other purpose than that intended.

5. Avoid contact with moving parts. Do not insert hands or fingers into appliance

while in use.

6. Check the power cord and plug regularly for any damage. If the cord or the plug

is damaged, it must be replaced by the manufacturer or a qualified person in

order to avoid an electrical hazard.

7. Do not use the appliance if it has been dropped or damaged in any way. In case

of damage, take the unit in for examination and/or repair by an authorised service

agent

8. To reduce the risk of electric shock, do not immerse or expose the motor

assembly, plug or the power cord to water or any other liquid.

9. Never immerse the unit in water or any other liquid.

10. Remove the plug from the socket by gripping the plug. Do not pull on the cord to

disconnect the appliance from the mains. Always unplug the unit when not in

use, before cleaning or when adding or removing parts.

11. The use of accessory attachments that are not recommended or supplied by the

manufacturer may result in injuries, fire or electric shock.

12. A short cord is provided to reduce the hazards resulting from becoming

entangled in or tripping over a longer cord.

13. Do not let the cord hang over the edge of a table or counter. Ensure that the cord

is not in a position where it can be pulled on inadvertently.

14. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas

or electric burner or in a heated oven.

15. Do not use the appliance on a gas or electric cooking top or over or near an open

flame.

16. Use of an extension cord with this appliance is not recommended. However, if it

is necessary to use an extension lead, ensure that the lead is suited to the power

consumption of the appliance to avoid overheating of the extension cord,

appliance or plug point. Do not place the extension cord in a position where it can

be pulled on by children or animals or tripped over.

17. This appliance is not suitable for outdoor use. Do not use this appliance for

anything other than its intended use.

18. Never carry the appliance using the power cord.

19. Do not leave this appliance unattended during use. Always unplug when the

blender is not in use or before cleaning.

20. Always operate the appliance on a smooth, even, stable surface. Always ensure

that the lid is in place before operating appliance.

21. Turn the blender on only after the blending unit has been assembled correctly

and has been inserted into the motor block and the lid has been attached.

Always wait until the blender has stopped completely before removing the

blending unit from the motor block.

22. Keep hands and other utensils out of the blender while the blender is in use, to

reduce the risk of severe injury to persons or damage to the machine.

23. Ensure that the rotary switch is in the “O” position after each use.

24. When blending hot liquids, allow them to cool to lukewarm before pouring them

into the blending jug. Remove the inner cover while blending warm liquids.

25. Do not operate the appliance without food or liquid in the jug.

26. To avoid the danger of fire and/or explosion, do not use this blender to stir paints

or solvents.

27. The manufacturer does not accept responsibility for any damage or injury caused

by improper or incorrect use, or for repairs carried out by unauthorised

personnel.

28. In case of technical problems, switch off the machine and do not attempt to repair

it yourself. Return the appliance to an authorised service facility for examination,

adjustment or repair. Always insist on the use of original spare parts. Failure to

comply with the above mentioned pre-cautions and instructions, could affect the

safe operation of this machine.

PARTS DIAGRAMS

Key:

1. Inner cover

2. Lid

3. Glass jug

4. Sealing ring

5. Cutting blade

6. Cup base

7. Motor block

8. Rotary switch

ASSEMBLY OF BLENDER

Ensure all parts are thoroughly clean before being used for the first time.

1. Put the rubber sealing ring (4) on the inner edge of the blade unit (5).

2. Put the blade unit with sealing ring into the cup base (6).

3. Mount the glass jug (3) onto the cup base(6) unit and turn the cup base unit in a

clockwise direction unit it is fixed.

4. When in use, after putting the ingredients in the glass jug, fix the lid (2) onto the

glass jug by pressing down.

5. Insert the inner cover (1) into the opening of the lid, and tune it in anticlockwise

direction unit it is locked.

6. Make sure that the blender is switched off (Switch in the ‘0’ setting). Place the jug

assembly on to the motor block (7) and press down until securely engaged.

OPERATING INSTRUCTIONS

1. Place the food and/or liquids into the glass jug.

2. Put the lid on the glass jug and close securely. Place the inner cover into the lid and

turn clockwise to lock

3. Switch on the unit using the rotary switch:

‘O’ is off

‘I’ is low, best used for liquids

‘II’ is high, best used for solids and for mixing liquids with solids.

‘M’ is for pulse use, best used for short bursts of blending and for crushing ice. This

setting will automatically move to ‘O’ when released, and will not stay on ‘M’

permanently.

4. Once finished blending, move the rotary switch to ‘O’ and pull the plug out of the

socket.

5. Remove the glass jug from the unit by lifting it. No rotating is required to remove the

glass jug.

USEFUL HINTS

1. When blending solid ingredients, it is best to cut them into small pieces before

inserting them into the blender. A diameter of 2-3cm is suggested.

2. Blend only small portions of solid ingredients at a time, adding more once each

portion is fully blended.

3. When mixing solid ingredients with liquids, add small amounts of liquid at a time. Use

the opening in the lid to add more liquid.

4. When blending very thick ingredients, use the pulse function to prevent overheating

the motor.

CLEANING AND MAINTENANCE

This appliance is for household use only and is not user-serviceable. Do not

open or change any parts by yourself. Please refer to a qualified electrical

service department or return to the supplier if servicing is necessary.

Always remember to unplug the unit from the electrical outlet when not in use

and before cleaning. Ensure that the speed control is set to “0”.

It is much easier to clean the blender directly after it has been used. Place

lukewarm water into the glass jug and turn the switch to ‘M’ briefly several times.

Empty the glass jug, disassemble it and wash the parts in warm, soapy water,

rinse and dry well.

Take extra care when handling the blades, as they are very sharp.

The motor block should be cleaned with a damp cloth only. Do not let water enter

the motor block.

All parts except the motor block are dishwasher suitable.

Do not use bleach or other abrasive substances or solvents to clean your

appliance as it can damage the finish.

Do not immerse the motor block in water or any other liquid, or hold it under a

running tap to clean.

To remove stubborn spots/marks, wipe the surfaces with a cloth slightly

dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,

dry, soft cloth.

STORING THE APPLIANCE

Unplug the unit from the wall outlet and clean all the parts as instructed above.

Ensure that all parts are dry before storing.

Store the appliance in its box or in a clean, dry place.

Never store the appliance while it is still wet or dirty.

Never wrap the power cord around the appliance. There is a cord storage facility

in the base of the motor block.

CHANGING THE PLUG

The unit is supplied with a 2 pin VDE plug.

If you wish to change the plug to a 3 pin, round pin plug, please connect as follows:

The wires in this mains lead are coloured in accordance with the following code:

Green/Yellow = Earth Blue = Neutral Brown = Live

SERVICING THE APPLIANCE

There are no user serviceable parts in this appliance. If the unit is not operating

correctly, please check the following:

You have followed the instructions correctly

That the unit has been wired correctly and that the wall socket is switched on.

That the mains power supply is ON.

That the plug is firmly in the mains socket.

If the appliance still does not work after checking the above:

Consult the retailer for possible repair or replacement. If the retailer fails to resolve the

problem and you need to return the appliance, make sure that:

The unit is packed carefully back into its original packaging.

Proof of purchase is attached.

A reason is provided for why it is being returned.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised

service agent, in order to avoid any hazard. If service becomes necessary within the

warranty period, the appliance should be returned to an approved Amalgamated

Appliance (Pty) Ltd service centre. Servicing outside the warranty period is still available,

but will, however, be chargeable.

PLEASE AFFIX YOUR PROOF OF PURCHASE/RECEIPT HERE

IN THE EVENT OF A CLAIM UNDER WARRANTY THIS RECEIPT MUST BE

PRODUCED.

W A R R A N T Y

1. Tedelex Trading (Pty) Limited (“Tedelex”) warrants to the original purchaser of this product

(“the customer”) that this product will be free of defects in quality and workmanship which

under normal personal, family or household use and purpose may manifest within a period of 1

(one) year from the date of purchase (“warranty period”).

2. Where the customer has purchased a product and it breaks, is defective or does not work

properly for the intended purpose, the customer must notify the supplier from whom the

customer bought the product (“the supplier”) thereof within the warranty period. Any claim in

terms of this warranty must be supported by a proof of purchase. If proof of purchase is not

available, then repair, and/or service charges may be payable by the customer to the supplier.

3. The faulty product must be taken to the supplier's service centre to exercise the warranty.

4. The supplier will refund, repair or exchange the product in terms of this warranty subject to

legislative requirements. This warranty shall be valid only where the customer has not broken

the product himself, or used the product for something that it is not supposed to be used for.

The warranty does not include and will not be construed to cover products damaged as a result

of disaster, misuse, tamper, abuse or any unauthorised modification or repair of the product.

5. This warranty will extend only to the product provided at the date of the purchase and not to

any expendables attached or installed by the customer.

6. If the customer requests that the supplier repairs the product and the product breaks or fails to

work properly within 3 (three) months of the repair and not as a result of misuse, tampering or

modification by or on behalf of the customer, then the supplier may replace the product or pay

a refund to the customer.

7. The customer may be responsible for certain costs where products returned are not in the

original packaging, or if the packaging is damaged. This will be deducted from any refund paid

to the customer.

TEDELEX TRADING (PTY) LTD (JOHANNESBURG)

JOHANNESBURG TEL NO. (011) 490-9000

CAPE TOWN TEL NO. (021) 552-5161

DURBAN TEL NO. (031) 792-6000

www.amap.co.za

Indice

Altri manuali Salton Robot da cucina

Salton

Salton SFP600 Manuale utente

Manuali Robot da cucina popolari di altre marche

INNOLIVING

INNOLIVING INN-727 Manuale utente

Berkel

Berkel C32 Manuale utente

Beko

Beko CHP5554W Manuale utente

KitchenAid

KitchenAid 5KFP0719 Manuale utente

QUIGG

QUIGG KM 2017Wi.20 Manuale utente

Lakeland

Lakeland PRESS AND CHOP 31557 Manuale utente

Bosch

Bosch MMR08 GB Series Manuale utente

HOFFEN

HOFFEN Chef Express T9532 Manuale utente

Garland

Garland 852 ZG Manuale utente

Robot Coupe

Robot Coupe CL50 Gourmet Manuale utente

SAPIRHOME

SAPIRHOME SP-1111-K Manuale utente

Moulinex

Moulinex DJ3051 Manuale utente

Bosch

Bosch MUM5 Manuale utente

cecotec

cecotec Mambo Touch Manuale utente

KitchenAid

KitchenAid 9KFC0516 Manuale utente

Black & Decker

Black & Decker hc 300 Istruzioni per l'installazione

Gorenje

Gorenje SBR 1000 DV Manuale utente

Arzum

Arzum AR 1128 Manuale utente