Sambo SB DT49M-TD7 Manuale utente
USER MANUAL
SB DT49M-V1 / 201911
SB DT49M-TD7
2 WIRE SYSTEM
7" VIDEO HANDS-FREE COLOR TFT MONITOR
• Please read this manual carefully before using the product you purchase,and keep it well for future
use.
• Please note that images and sketch maps in this manual may be different from the actual product.
PRECAUTIONS
• Slots or openings in the back of the monitor, are provided for ventilation and to ensure reli-
able operation of the video monitor or equipment and to protect if from overheating. These
openings must not be blocked or covered. The monitor should never be placed near or over
a radiator or heat register and should not be placed in a built-in installation such as a book-
case unless proper ventilation is provided.
• All parts should be protected from violence vibration. And not allow be impacting, knocking
and dropping.
• For clean the LCD screen, using hands or wet cloth is forbidden.
• Please do the cleanness with soft cotton cloth, please do not use the organic or chemical
clean impregnate. If necessary, please use pure water or dilute soap water to clean the dust.
• Imagedistortionmayoccurifthevideodoorphoneismountedtooclosetomagneticelde.g.
Microwaves, TV, computer etc.
• Please keep away the video door monitor from wet, high temperature, dust, and caustic and
oxidation gas in order to avoid any unpredictable damage.
• Do NOT open the device in any condition, call the administrator for help if there is any prob-
lem or mulfunction happens.
CONTENTS
PARTS AND FUNCTIONS..................................................................................................... 4
Front panel ............................................................................................................................. 4
Mounting................................................................................................................................. 5
Screen .................................................................................................................................... 6
BASIC OPERATIONS............................................................................................................ 7
Answering a call ..................................................................................................................... 7
Pan-tilt & Zoom....................................................................................................................... 9
Adjusting screen&volume...................................................................................................... 10
Door release.......................................................................................................................... 11
Calling other monitors............................................................................................................ 11
Monitoring.............................................................................................................................. 12
Recording .............................................................................................................................. 13
Viewing images/videos .......................................................................................................... 14
Formating SD card ................................................................................................................ 15
Copying recordings to SD card.............................................................................................. 15
Leaving messages................................................................................................................. 16
Viewing visitor messages ...................................................................................................... 16
Mute function......................................................................................................................... 17
Transferring call..................................................................................................................... 18
Get QR code.......................................................................................................................... 19
Download setup 2 EASY APP ............................................................................................... 19
Get QR code.......................................................................................................................... 19
Surveillance door station via 2 EASY APP............................................................................ 21
Viewing calling records.......................................................................................................... 22
SMS function ......................................................................................................................... 23
Openning staircase light........................................................................................................ 24
Motion detect function .......................................................................................................... 25
SETUP INSTRUCTIONS....................................................................................................... 26
Setting date and time............................................................................................................. 26
Setting ring tone .................................................................................................................... 26
Setting ring volume................................................................................................................ 27
Enabling/Disabling the operation sound................................................................................ 27
Naming door station & camera.............................................................................................. 27
Setting monitor time............................................................................................................... 28
Enabling/Disabling motion detect function ............................................................................ 29
Enabling/Disabling intercom function ................................................................................... 29
Changing the display language ............................................................................................. 30
Restoring to default setting.................................................................................................... 30
SYSTEM CONFIGURATIONS .............................................................................................. 31
Entering installer setup.......................................................................................................... 31
APPENDIX ............................................................................................................................ 35
Specication .......................................................................................................................... 35
-4-
PARTS AND FUNCTIONS
Key functions
[1]
[7]
[6]
[4]
[5]
[2]
[3]
NO. Item Description
[1] Digital LCD touch screen •See the next page for details
•Display the visitors' image
[2] Mute indicator Light up when activate "Mute" function
[3] Home away indicator Light up when activate "Home away" function
[4] Home button
• Press to return main menu page
• Light up in green when power on
• Blink in green when have missed calls or images
have not been viewed.
•Blink in blue while receives call
[5] Microphone Transmit audio from one station to other stations
[6] Speaker Send out sounds of ring tones,audio and alarms
[7] SD card slot Use to insert micro-SD card
Front panel
-5-
The installation height is suggested to 145~160cm.
1. Use screws to fasten the mounting bracket to the wall with mounting box.
2. Connect the 2 wire cables to the unit.
3. Mount the unit to the mounting bracket, make sure the magnet on the unit is absolutely at-
tached to the mounting bracket.
4. Final view.
PARTS AND FUNCTIONS
Terminal description
1 2 3 4
Mounting screw
x 2(included)
Mounting box
(size:86x86mm)
The unit
Magnet
2 wire cable
Mounting bracket
1 2 3 4 5 6
ON DIP
1 2 3 4 5 6
ON DIP
L2
L1
DIP Switches
SW+
SW-
RING
GND
NC
L1,L2: Bus line terminal.
SW+,SW-: Extra door bell call but-
ton connection port.
Ring,GND: Extra buzzer connection
port.
NC: Undened.
DIP switches: Total 6 bits can be
congured.
• Bit1~Bit5: User Code setting.
• Bit6: Set to ON if the monitor is at
the end of the line or works with
DBC4A. Otherwise, set to OFF.
Mounting
-6-
PARTS AND FUNCTIONS
The Main menu is your starting point for using all the applications on your monitor. You can cus-
tomize your Main menu to display your logo.
Press [HOME] button or touch anywhere of the screen on monitor in standby mode, the Main
menu will appear as follow:
Main Menu
CLOSE
Touch it to turn off the screen
and make the monitor in standby
mode.
SETTINGS
Touch it to enter
setup page.
PHONE
Touch it to setup the divert
number if activate the Divert
function.
Displays which door station
is calling.
Shows status of talking,unlocking
ect.
Displays talking time.
5 direction pad button,
zoom&pantilt the picture.
LIGHT
Touch it to light up the
staircase light via RLC.
MOTION DETECT
Touch it to enter motion
detect options.
MONITOR
Touch it to view outdoor condition.
SMS
Touch it to write messages or
review the received/sent out
messages.
MEDIA
Touch it to play recorded images
or videos from door stations.
Review messages left by visitor.
See infos of memory/SD.
CALL RECORD
Touch it to see calling in/calling
out records or missed calls .
CALL SCENARIO
Touch it to activate the functions
of Mute,Left message and Divert
call.
INTERCOM
Touch it to enter
intercom selections.
Current date and time
Status bar
LOGO LOCATION
Touch it to view Device
infos.The logo can be
customized.
While talking with a door station
00:10 DS-1
REC
Note: The 5 direction pad operation should make effective with sh-eye door station.
Blinks while recording.
Screen
-7-
BASIC OPERATIONS
• When there is a call from a video door station.The call tone sounds, an image will be dis-
played on the screen.
• Touch icon on screen, begin communicating hands free with the visitor for 90 seconds.
• While communicating with the visitor, unlock the door, capture images/videos and adjust
screen&volume are available. More details,please refer the following descriptions.
Note: If nobody answers the phone, the screen will be turned off automatically after 40 seconds.
It’s available to select cameras to monitor while being called.
Max.16 cameras can be selected to monitor, 4 cameras is default.
Follow the steps:
Monitoring cameras while being called/talking
00:10 DS-1 00:10 DS-1
Normal
Monitor Select
CM-1
CM-2
CM-3
CM-4
Answering a call
-8-
• Touch icon on screen or press the [HOME] button to complete the communication.
To complete communication
Note: Communication also ends automatically after 90 seconds.
1.Receiving a call while talking with a door station
2.Receiving a call while talking with other monitors
• Other door stations calling is forbidden
• Conclude current talking to answer the new call-in
• The talking will stop immediately, call tone sounds in normal.
• The video image from the door station is displayed on the screen, talking,unlock,capture
images/videos, adjust screen&volume are available.
BASIC OPERATIONS
It’s available to adjust image scale while being called. Total 3 image modes can be selected.
Follow the steps:
Compare the difference of these 3 image modes:
Adjusting image scale while being called/talking
00:10 DS-1 00:10 DS-1
Normal
00:10 DS-1
-9-
BASIC OPERATIONS
It is available to adjust the display mode for viewing images at a fish-eye door station by using
the 5 direction pad button.
Here are some examples:
• Touch icon to zoom the center position.
Note:
1.The zoom&pantilt function should make in effect
sheyedoorstation.
2.The edge of pantilt image will not be displayed.
When an image at a door station is
displayed,move to the desired position
by touching on the
screen to view the image in zoom mode.
• Touch icon to zoom the right position.
Pan-tilt & Zoom
-10-
BASIC OPERATIONS
Adjusting the speaker volume
Adjusting images
While receiving a call from,communicating with, or monitoring a video door station,you can ad-
just the screen and speaker volume. Follow the steps:
Total 4 scene modes can be selected in sequence:Normal, Brightly, Soft and User.Whichever
mode you choose, there will be a corresponding value for contrast,bright and color.
Youshouldknowthatthecontrast,brightandcolorcanbemodiedfreely,butthisactionshould
be at the User scene mode.
Volume can be adjusted at any time.
Adjusting range: 0 (mute), 1 - 9.
Adjust the contrast of the screen,the range is 0~9. Touch -or +to change the level.
Adjust the brightness of the screen ,the range is 0~9. Touch -or +to change the level.
Adjust the color of the screen,the range is 0~9. Touch -or +to change the level.
Touch -or +to reach desired level.
00:10 DS-1 00:10 DS-1
Normal Brightly Soft User
Note: The adjustments have no effect on the recorded images.
Adjusting screen&volume
Indice
