Sammy Mighty Driver Manuale utente

Ver.1.0

3 Sarnmy usA Gorporation

901 Cambridge Drive

Elk Grove Village, lL 60007-2434

Phone: (5471364-9787

FAX: (847) 364-9831

I nternet: www.sam myusa.com

HOW TO ENTER THE GAME SETTING MODE

HOW TO SELECT AND DECIDE CONTENTS

RETURN TO PREVIOUS MENU

RETURN TO GAME MODE

I/O & DISPLAY TEST

MECHANISM TEST

SOUND TEST

POWER

DIMENSIONS

WEIGHT

120VAC @60H2 USA&CANADA

Width: 24' (600 mm)

Height 48" (1215 mm)

Depth: 38" (960 mm)

146 lb (66 kg)

H=48"

(1215 mm)

D=38"

(960 mm)

With Steering Wheel:

45" (1130 mm)

'- -.--

W=24"

(600 mm)

Playfield Dome, MD

Par.#'.41-70-450

*'*""

SPECIFTCATTONS (GONT.) \--

LIMITED WARRANTY

Sammy USA Corp. warrants all products to be free from defective materials and workmanship for a

period of thirty (30) days from the Sammy USA Corp. invoice date unless othenrvise specified in

writing by Sammy USA Corp. The extent of this warranty applies to all electronic assemblies only,

'' and does not include lamps and fuses.

This limited warranty is invalid for any product that upon examination is deemed to have been subject

to misuse, improper repair or installation, neglect or violation of specification or other instructions

published by Sammy USA Corp. There are no additionalwarranties described above. The limited

warranties described above shall be in lieu of any other warranty, expressed or implied, including but

not limited to any implied wananty of merchantability or fitness for a particular purpose.

The Mighty Driver redemption game is an indoor game machine- lt is not designed for outdoor use"

Avoid installing the game in the following locations:

a Locations subject to rain or water damage

a Locations in direct sunlight

a Locations subject to extreme heat

a Locations near hazardous or flammable liquids or chemicals

You will need the following minimum dimensions for egress into your location:

60 inches in height

25 inches in width

INSTALLATION

Unpack your game carefully. Be careful of the shipping staples. They can be sharp.

Your game is assembled and should not need any assembly.

Levelyour game using enclosed Leg levelers. Prizes willthen fall properly.

The standard voltage for U.S. and Canada 120V I 125V - 3A; Europe 220V 1240V -24.

Use of extension cords is prohibited.

Use only a grounded outlet. YOUR GAME MUST BE GROUNDED!!!

The minimum space required for operation in your locations should be:

. 80,,high

a 30" wide

t 60" depth

THE GAME MUST BE LEVEL. IF THE GAME IS NOT ON A LEVEL SURFACE, THE TILT

SYSTEM WILL MALFUNCTION. USE A LEVEL TO AVOID NEEDLESS ADJUSTMENTS.

SAFETY PRECAUTIONS

a Be sure to turn the power off or unplug the game before working on the unit.

a Do not unplug game by pulling on the line cord.

a Replace line cord if the insulation is damaged in any way with one of equal quality.

t Replace open fuses with same type and rating.

t Re-check and re-seat all harness connections.

GAME PLAY

t Insert coin(s) or token(s) .

. Control the Car using steering wheel to hit the FLAGS.

. More FLAGS, more tickets.

GAME SETTING MODE

HOW TO ENTER THE GAME SETTING MODE

Re-power on while pressing and holding the RESET Switch which

is located inside of front door. Digits of 88 are shown first. Then

release the RESET switch OFF to show the -1 on 2 digits LED

display on Marquee box" EE)TH

HOW TO SELECT AND DEGIDE EAGH CONTENTS

After entering GAME SETTING mode, press SERVICE switch to move the number of

FUNGTIqTS. (2 digits will be changed by pressing the SERVICE switch.) Press RESET switch to

select it. After selecting, display shows each setting numbers.

Press SERVIGE switch to move the number of SETTINGS. (2 digits will be changed by pressing

the SERVICE switch) Press RESET switch to select it.

RETURN TO PREVIOUS MENU

Change FUNCTIONS and SETTINGS to selection "oo". Select these Digits then press RESET

switch to return to previous menu.

RETURN TO GAME MODE

After selecting any SETTINGS, re-power on the game.

For the FUNCTIONS and SETTINGS, please refer to the setting table on next page.

DIP SW SETTING

Payout setting is set by DIPSW on Main PCB. Please refer below table.

PAYOUT

SETTING Use Asahi Seiko Card Dispenser.

No Ticket, No Card Payout. Extend game play

Only game play. No payout.

ATTEMTION!!! PLEASE KEEP OFF OTHER SWITCHES. (SW 4, 5,6,7 AND 8}

-1 COIN CHUTE 11 lGOIN/1PLAY 80.25 per play (or $1.00 coin per 1 play)

80.50 per play

10.75 per play

!0.25 per 2 plays (or $1.00 coin per 2 plays)

l0 75 per 2 plays

10.50 per 3 plays

10.75 per 4 plays

E0 75 per 5 plays

3pin the Steering Wheel to start the game

13 3COINS/1PLAY

14 lCOIN/2PLAYS

15 3COINS/2PLAYS

16 2COINS/3PLAYS

17 3COINS/4PLAYS

18 3COINS/5PLAYS

19 FREE PLAY

oo RETURN TO PREVIOUS

-2 DIFFICULTY

LEVEL

Number of LAPS

and speed of

control

21 EASY 5 LAPS, EASIER

5 LAPS, EASY

5 LAPS, NORMAL

5 LAPS, HARD

5 LAPS, HARDER

4 LAPS, EASIER

4 LAPS, EASY

4 LAPS, NORMAL

4 LAPS, HARD

4 LAPS, HARDER

3 LAPS, EASIER

3 LAPS, EASY

3 LAPS, NORMAL

3 LAPS, HARD

3 LAPS, HARDER

2E V

2F HARD

oo RETURN TO PREVIOUS

-3 AUTO START 31 O SECOND

33 1O SECONDS

34 15 SECONDS

35 20 SECONDS

36 25 SECONDS

37 30 SECONDS

oo RETURN TO PREVIOUS

-6 ATTRAGT

CAR MOVING

(Waiting time)

61 OFF

62 3 MINUTES

64 1O MINI.JTES

oo RETURN TO PREVIOUS

CARD PAYOUT

SETTING

ayout after game over.

CARD PAYOUT

SCORE SETTING PAYOUT EVERY TIME

lll -A SCORE SETTING

PER 1 TICKET

PAYOUT

A1 1 FLAG

A2 2 FLAGS

A4 4 FLAGS

A5 5 FLAGS

A6 6 FLAGS

A7 7 FLAGS

A8 8 FLAGS

A9 9 FLAGS

AA {O FLAGS

Ab 11 FLAGS

AC {2 FLAGS

Ad 13 FLAGS

AE 14 FLAGS

AF 15 FLAGS

oo RFTIIRN TO PRFVIO1JS

-b MERCY TICKET b't OFF Payout when game is over"

b3 2 TICKETS

b4 3 TICKETS

b5 4 TICKETS

b6 5 TICKETS

b7 6 TICKETS

b8 7 TICKETS

b9 8 TICKETS

bA 9 TICKETS

bb 1O TICKETS

oo RETTJRN TO PREVIOUS

Used when player gets 30 flags

EXTEND GAME

PLAY SETTING

Not used when

Ticket & Card payout

is active"

Uo to 4 GAMES

f r ---f--Do '

You can check 3 tests in this mode.

HOW TO ENTER THE TEST MODE

Re-power on while pressing and holding the SERVICE Switch

which is located inside of front door. Digits of 88 are shown first.

Then release the SERVIGE switch OFF to show the 1- on 2

digits LED display on Marquee box. EE)ET

HOW TO SELECT AND DECIDE GONTENTS

After entering TEST MODE, press SERVICE switch to move the number of contents. (2 digits will

be changed by pressing the SERVICE switch.) Press RESET switch to select it. After selecting,

display shows each function numbers.

TEST MENU FUNCTION NUMBER

. I/O & DISPLAY TEST

. MECHANISM TEST

. SOUND TEST

RETURN TO PREVIOUS MENU

Each test function has the number "oo", select this and press RESET switch.

lf you want to quit the test during testing, press RESET switch when the LED Display does not

show any numbers.

r I/O & DISPLAY TEST

Display shows 1- then press SERVICE switch to select following TEST menu. There are 3 kinds

as below. (1, 12 ana 131

STEERING WHEEL TEST (Press SERVICE switch to select 11 ttren press RESET switch)

Check the Optic sensor functions on Steering WheelAssy. LED Display shows digits from 0 to 48

when the Optic sensor is activate. Spin the wheel to move the digits, this means the Optic sensor

works fine.

SWITCH TEST (Press SERVICE switch to select 12 tfren press RESET switch)

Check the Coin switch and Magnet under the CAR Assy.

lf the Magnet is positioned properly and Coin Switch is OFF, Display shows "0".

When the Coin Switch is ON, Display shows "l" then Lamp #1 on the Marquee will be ON. Lock

out coin of Coin mech will work, too.

when the Magnet is oFF, Display shows "2" and Lamp #3 on the Marquee will be oN.

LAMP TEST (Press SERVICE switch to select 13 tfren press RESET switch)

Check the 9 Lamps and LED Display PCB on the Marquee" They automatically Light up and count

up.

MECHANISM TEST

Display shows 2- then press SERVICE switch to select following TEST MENU. There are 3 kinds

as below. (21,22 and 23)

X-MECH. UNIT TEST (Press SERVICE switch to select 21, then press RESET switch.)

X-MECH is controlling the CAR Assy by Magnet base and Motor. Spin the Steering Wheelto

move the Magnet base with Car Assy left and right. When the Left & Right Limit Sensor in the X-

MECH is activated, Lamp #1or#9 on the Marqueewill light up. Displaywillshow Moving Digiis

when the Motor is moving.

LAMPS ON THE MARQUEE (9 POSTTTONS)

Indice

Altri manuali Sammy Macchina per videogiochi arcade

Sammy

Sammy COIN CIRCUS Manuale utente

Manuali Macchina per videogiochi arcade popolari di altre marche

Universal Space

Universal Space COCONUT BASH Manuale utente

Bay-Tek

Bay-Tek EVOLVE Manuale utente

Global VR

Global VR America's Army Istruzioni per l'installazione e il funzionamento

Atronic

Atronic Cashline Manuale utente

Universal Space

Universal Space Checky Monkey Manuale utente

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Manuale utente

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Manuale utente

Family Fun Companies

Family Fun Companies Reactor Guida rapida

Universal Space

Universal Space FRUIT MANIA Extreme Manuale utente

falgas

falgas CARRUSEL FIESTA Manuale utente

Konami

Konami DanceDanceRevolution Manuale utente

Bay-Tek

Bay-Tek quik drop Manuale utente

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manuale utente

Adrenaline

Adrenaline Flying Tickets Istruzioni per l'installazione e il funzionamento

Swinks

Swinks Stern Pinball Ghostbusters Manuale utente

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manuale utente

jakar

jakar SPEED CARS Manuale utente

Carmelli

Carmelli HAT TRICK NG1015H Manuale utente