Samsung MCR-SMD Manuale di istruzioni

Motion Detection Sensor

(MDS) Kit

Installation & User manual

MCR-SMD

࡛Thank you for purchasing this Samsung Product.

࡛Before operating this unit, please read this user manual carefully and retain it for future

reference.

DB68-07694A-00

English

Contents

Safety Information 3

Installation 4

MDS Kit

Accessories

Installing the MDS Kit

Installation troubleshooting

Operation 6

Turning the MDS Kit on or off

Setting the MDS Kit installation option

Samsung comfort control features

Operation troubleshooting

English

Safety Information

This manual explains how to install a Motion Detection Sensor (MDS) kit onto an indoor unit and how to use it.

Please read this manual thoroughly before installing and using the MDS Kit.

WARNING

Hazards or unsafe practices that may result in severe personal injury or death.

CAUTION

Hazards or unsafe practices that may result in minor personal injury or property damage.

WARNING

Contact a qualified installer or a service centerfor the installation.

When detaching or disposing of an MDS Kit, contact a qualified installer or a service center.

࡛Failing to do so may result in electric shock, fire, explosion, problems with the product, or injury and may also

void warranty on the installed product.

Install an MDS Kit securely in a designated place, using the installation accessories.

࡛If the MDS Kit is not installed securely, the component might fall off and get damaged.

Do not attempt to repair, disassemble, or modify the appliance yourself.

࡛Failing to do so may result in product malfunction, electric shock, or fire.

So when repairing the product, contact a qualified installer or a service center.

Installation

English

Installation

MDS Kit

Accessories

Item Connection

wire Cable tie

Installation

manual/User

manual

Quantity 121

Shape

CAUTION

࡛When installing the MDS Kit, be sure to use the kit and

accessories designated by Samsung.

Installing the MDS Kit

1 If the panel is already installed onto the indoor unit,

remove it from the indoor unit.

For more information about removing the panel,

refer to the Panel installation manual.

CAUTION

࡛Be sure to install the MDS Kit onto the panel while it is

disassembled from the indoor unit.

2 Remove the corner cover from the panel, located at

the opposite diagonal corner of the panel display.

Panel display

Corner cover

3 Mount the MDS Kit onto the same location.

MDS Kit

NOTE

࡛The MDS Kit cannot be installed onto any location

other than the designated one.

4 Arrange the connection wire:

a Push the hook ① on the cover-back.

b L

ift up the cover-back in the direction of arrows

②as shown in the figure.

English

Installation

c Arrange the connection wire using the supplied

cable ties so that, when the cover-back is back in

place, it is located under the cover-back.

d Lower down the cover-back so that it is in place.

Connection wire

Cover-back

5 Connect the connection wire to the indoor unit PBA.

When connecting the wire to the indoor unit PBA,

check the colors and numbers of the pins on the

terminal.

6 Assemble the panel onto the indoor unit.

For more information about assembling the panel,

refer to the Panel installation manual.

MDS Kit

7 Set the MDS Kit installation option using the wired

or wireless remote control.

NOTE

࡛Because the indoor unit ships with the MDS Kit

installation options set to "Disuse", you must change

the value of the MDS Kit installation option.

࡛For more information about how to set the MDS

Kit installation options, see Setting the MDS Kit

installation option on page 7 and the indoor unit

installation manual.

࡛Enter the installation option value more than twice.

࡛After entering the installation option value, reset the

indoor unit to check for correct operation.

Installation troubleshooting

Abnormal conditions

LED lamp display

Remarks

Operation Defrost Timer Filter

MDS Kit error indication

(displayed on the indoor unit) 㑃XX

㑃

㏼On 㑂Flickering XOff

If you turn off the air conditioner when an LED is flickering, the LED is also turned off.

Operation

English

Operation

Turning the MDS Kit on or off

Using wired remote control

Press the MDS button on the wired remote control to turn the MDS Kit on or off.

NOTE

࡛The wired remote control must be installed togetherwith the indoor unit.

MDS Button Click Once Twice Three times

Display Indirect Direct -

Standard Mode MDS On (only Turn off the set) MDS Off

Premium Mode Indirect Flow Control Direct Flow Control MDS Off

Using wireless remote control

Indirect function with Motion detection feature

In the Cool or

Heat mode

  

Select

Indirect



Direct function with Motion detection feature

In the Cool or

Heat mode

  

Select Direct.



Option Selection Indirect Direct No Selection

Standard Mode MDS On (only Turn off the set) MDS Off

Premium Mode Indirect Flow Control Direct Flow Control MDS Off

NOTE

࡛In the Standard mode, Indirect/Direct is displayed on the wireless remote control, but does not operate.

࡛The Indirect/Direct function is supported only in the Premium mode.

Operation

English

Operation

Setting the MDS Kit installation option

Set SEG23, the MDS Kit installation option of the indoor unit where the MDS Kit is installed, to the desired value with

referring to the table below.

Function SEG23 Soft Off + Hard off SEG23 Soft Off only

0 Disuse

Standard

Off after 20 min. (from the last motion detection)

7 Off after 20 min.

2 Off after 40 min. 8 Off after 40 min.

3 Off after 80 min. 9 Off after 80 min.

Premium

4 Off after 20 min. A Off after 20 min.

5 Off after 40 min. B Off after 40 min.

6 Off after 80 min. C Off after 80 min.

SOFT OFF: The indoor unit turns off its operation at the indicated time in the table for Installation Option after its final

motion detection. But, it turns on again if the MDS detect motion.

HARD OFF: Designated time after SOFT OFF, it cannot turn on automatically when it detect motion. Users should control to

turn on the indoor unit with remote controller, etc.

NOTE

࡛Detectable MDS area: 6 m radius at 2.7 m height.

࡛When the air conditioner supports the Wind-Free Cooling function, it operates the Wind-Free Cooling function

automatically before the air conditioner turns off.

࡛ Ã˙ϩ˵ɇΧΧʪϑθʪΧʪɇϩʪʒцϩ˵ɇϩϩ˵ʪđUƊçϩϩЇθϑϩ˵ʪɇθʀͱʒϩͱʪθͱ˙˙ɇʒͱࡥϩ˵ʪϩθʪʒЇʀʪϑϩ˵ʪϩʪϩɇʪЇϩϩ˵ʪ

air conditioner is turned off for energy efficency.

࡛In the Standard mode, you can only turn on/off the air conditioner.

࡛In the Premium mode, you can also operate the functions such as turning on/off the air conditioner, comfort

temperature and comfort saving controls.

࡛The MDS sensor may detect other heat sources, not humans, and perform the MDS functions.

MDS Button Click Once Twice Three times

Standard Turn on Turn off -

Premium Indirect Flow Direct Flow Turn Off

Operation

English

Operation

Samsung comfort control features

The following Samsung comfort control features are activated when SEG23, the MDS Kit installation option of the indoor unit, is set to the

Premium mode. For more information about the MDS Kit installation option, see Setting the MDS Kit installation option on page 7.

࡛Indirect Flow: When the MDS Kit detects motion, it moves the air flow blades to prevent the breeze from blowing directly

toward the specified areas (locations where humans are).

࡛Direct Flow: When the MDS Kit detects motion, it moves the air flow blades to send the breeze directly toward the specified

areas (locations where humans are).

࡛Comfort Temperature: When the temperature difference between the upper part and lower part of a room is significant, the

MDS Kit moves down the air flow blades to mix airs and consequently to reduce the temperature difference.

࡛Comfort Saving: The MDS Kit detects motion in the room and controls the set temperature (up to the amount of +2°C for

cooling, -2°C for heating) to reduce electricity consumption.

Operation troubleshooting

࡛If the MDS Kit has a connection problem or malfunction, the MDS Kit error E143 is indicated on both the panel display

and the wired remote control.

࡛Although the MDS Kit error occurs, the indoor and outdoor units normally operate without the MDS Kit functions.

࡛If the MDS Kit error persists, check the wire connection and contact a service center.

English

Operation

Indice

Altri manuali Samsung Accessori

Samsung

Samsung SIA-0100Q Manuale utente

Samsung

Samsung SmartThings GP-U999SJVLCAA Manuale utente

Samsung

Samsung SmartThings Series Manuale utente

Samsung

Samsung EJ-FT810 Manuale utente

Samsung

Samsung SIP-1212W Manuale utente

Samsung

Samsung F-SS-PRES-001 Manuale utente

Samsung

Samsung TS48W Series Manuale utente

Samsung

Samsung EB-U1200 Manuale utente

Samsung

Samsung S Pen Pro Manuale utente

Samsung

Samsung SCW-K240 Manuale utente

Samsung

Samsung HM5100 Manuale utente

Samsung

Samsung EAD-P010 Manuale utente

Samsung

Samsung SCL Series Manuale utente

Samsung

Samsung ProXpress C306x series Manuale utente

Samsung

Samsung RFD01F series Manuale utente

Samsung

Samsung SmartThings Hub Manuale utente

Samsung

Samsung SIP-1201DD Manuale utente

Samsung

Samsung SIS-0001 Manuale utente

Samsung

Samsung RT4401-48A Manuale utente

Samsung

Samsung SmartThings STS-PRS-250 Manuale utente

Samsung

Samsung SIA-0100Q Manuale utente

Samsung

Samsung XE800ZAA Manuale utente

Samsung

Samsung HM5100 Manuale utente

Samsung

Samsung Slim Duct-CNH LDB Manuale di istruzioni

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente