Samsung SEF-54PZF Manuale utente

Thank you for purchasing the SEF-54PZF.

The SEF-54PZF also allows wireless P-TTL photography and high-speed sync.

It is clip-on type flash which enables accurate focus adjustments even in dark locations with built-in

AF-assist spot beam.

Please read this manual carefully before using the flash.

The optional accessories can be compatible with the Pentax.

FOR SAFE USE OF YOUR FLASH UNIT

Although we have carefully designed this flash unit for safe operation, please be sure to follow precautions

given on page 4-6.

WARNING This mark indicates precautions that, if not followed, could result in

serious injury to the user.

CAUTION This mark indicates precautions that, if not followed, could result in

minor or medium injury to the user or damage to the equipment.

is a symbol indicating items that are prohibited.

is a symbol emphasizing a warning.

WARNING

The electronic circuits inside the flash contain

high voltage working parts. Never attempt to

disassemble the flash unit yourself.

Never touch internal parts of the flash unit if

they become exposed from dropping the

camera or for some other reason, as there is

danger of an electric shock.

Do not expose the flash unit to water or

moisture. This is to prevent electrical shock.

As the flash head is hot when it is firing, do not

touch the Flash head when it is firing.

CAUTION

Do not use the flash near anyone's eyes, as it

may hurt them. Be particularly careful with the

flash around infants.

Never try to disassemble or short the battery.

Also, do not dispose of the battery in fire, as it

may explode.

Misuse of the battery can cause hazards such

as leakage, overheating, explosion, etc. The

battery should be inserted with the "+" and "-"

sides facing correctly.

Remove the batteries from the camera

immediately if they become hot or begin to

smoke. Be careful not burn yourself during

removal.

PRECAUTIONS FOR YOUR FLASH UNIT

•Never use organic solvents such as paint thinner, alcohol or benzene to clean the flash unit.

•Avoid leaving the flash unit for extend period in places where the humidity and temperature are very high such

as in a car.

•Be careful not to subject the flash unit to strong vibrations, shock or pressure. Use a cushion to protect the flash

unit when carrying it in a motorcycle, car, boat, etc.

•Do not use the flash unit where it may be directly exposed to rain water etc.

•Do not mix battery brands, type or an old battery with a new one.

•When using the flash unit off the camera, do not try to attach any metallic object to the electric contacts or to

mount incompatible accessories.

•Do not attach any accessories having the wrong number of electrical contacts for the hot shoe or grip.

Otherwise, some functions may not work properly.

•Samsung will not be held responsible for any accidents or damage, etc. caused due to the use of this product with

cameras which are made by companies other than Samsung.

•Periodic checks are recommended every 1 to 2 years in order to maintain high performance.

If the unit has not been used for an extended period of time, or is being readied for an important shoot, it is

recommended that you take a test flash with the test button and test shoot with it.

•Avoid contact with garbage, dirt, sand, dust, water, toxic gases, salt, etc. When the flash unit is subjected to rain

or moisture, wipe it off with a dry soft.

•When photographing black subjects or white subjects, use exposure compensation.

CAUTIONS REGARDING BATTERIES

•This flash unit uses 4 AA-size alkaline, lithium, or nickel metal hydride batteries. Do not use any other type of

battery. The flash unit may not be able to operate correctly or demonstrate sufficient performance, or the flash unit

itself may generate heat, depending on the type of batteries used.

•Manganese batteries are not recommended for use as they provide a lower number of flashes per set of batteries.

•If you do not intend to use the flash unit for an extended period of time, remove the batteries.

Leaving the batteries in may cause damage to the flash unit due to leakage etc.

•Battery performance may temporarily be hindered in low temperatures. Batteries should be kept warm in

temperatures below freezing for proper performance.

•AA-size alkaline and lithium batteries themselves are not rechargeable. Also, do not dismantle the batteries.

Trying to recharge or dismantle these batteries may cause an explosion or leakage.

•When changing batteries, do not mix batteries of different manufacture, type and capacity.

•Do not insert the batteries with the positive (+) and negative (-) terminals the wrong way around.

Incorrect insertion may lead to an explosion or fire.

TABLE OF CONTENTS

FOR SAFE USE OF YOUR FLASH UNIT .......................................................................................................3

PRECAUTIONS FOR YOUR FLASH UNIT .....................................................................................................5

NAMES OF PARTS ..........................................................................................................................................8

INSERTING THE BATTERIES .......................................................................................................................14

MOUNTING TO CAMERA..............................................................................................................................16

TURNING THE POWER ON..........................................................................................................................17

SELECT BUTTON [S]/ADJUSTMENT DIAL FUNCTIONS ............................................................................20

CAMERA FORMAT AND FLASH COVERAGE ANGLE.................................................................................22

USING THE FLASH MODES .........................................................................................................................25

P-TTL auto flash (P-TTL) ...........................................................................................................................26

Auto flash (A) .............................................................................................................................................27

Manual flash (M) ........................................................................................................................................29

USING THE SYNC MODE .............................................................................................................................31

ADVANCED FUNCTIONS ..............................................................................................................................37

Slave ..........................................................................................................................................................48

Slave Mode Setting ...................................................................................................................................50

Bounce Flash .............................................................................................................................................51

AF Spotbeam..................................................................................................................................................53

MODELING FLASH/TEST FLASH .................................................................................................................55

FLASH EFFECTIVE RANGE .........................................................................................................................57

SPECIFICATIONS ..........................................................................................................................................64