Samsung SSA-R1001 Manuale utente
Quick Guide
Contents
SSA-R1001
SSA-R1101
Product Introduction
2
Installation and External Connection
7
ENG FRE GER SPA ITA
2
_
Installation and External Connection2
_
Product Introduction
Product Introduction
WHAT’S INCLUDED
Check if the following items are included in the product package.
What’s in cluded in SSA-R1001
xGn
SSA-R1001
Bezel READER Module
3.5x40mm screws (x2)
3.5x25mm screws (x2)
6x30mm Plastic Anchor (x2)
Quick Guide CD Manual Ferrite Core
W
QUICK GUIDE
English_3
ENG
QUICK GUIDE
English_3
ENG
What’s included in SSA-R1101
xGn
SSA-R1101
Bezel READER Module
3.5x40mm screws (x2)
3.5x25mm screws (x2)
6x30mm Plastic Anchor (x2)
Quick Guide CD Manual Ferrite Core
4
_
Installation and External Connection4
_
Product Introduction
AT A GLANCE
Front/Rear
2
3
4
QUICK GUIDE
English_5
ENG
QUICK GUIDE
English_5
ENG
LED Displays the system operation status using red and green indicators.
Buzzer Piezo buzzer.
Connection Cable Used to connect to the power or I/O cable.
Fixing Hole Fixing hole for wall-mounting.
6
_
Installation and External Connection6
_
Product Introduction
CABLE COLOR SCHEME
Item Cable Color Signal Line Description
Power Red DC +12V DC +12V supplied
Black GND Earth-grounding for power
Input Blue Buzzer Control BUZZER Control Input Port
Yellow LED Control LED Control Input Port
Output Green Out Wiegand 0 Wiegand Data 0 Output Port
White Out Wiegand 1 Wiegand Data 1 Output Port
Communication Purple RS-232(TX) RS-232 Transmission Output Port
Not used
Gray
NC Not ConnectedBrown
Orange
I
n
I
N
U
QUICK GUIDE
English_7
ENG
Installation and External Connection
- Inserted in the doorframe / attached to the wall
Two 6-32 or M3 holes are 3.3” (8.38 cm) away from
each other vertically; between the two exists one 1/2”
hole through which the reader cables are arranged.
The midway hole is located 1.7” (4.31cm) down from
the upper hole.
(If the product is already installed, you can skip the
follow step)
Insert the reader cables to the midway hole and fix the
reader module with two 6-32 or M3 screws.
Insert the reader module into the bezel and push it up
until you hear a click.
1.
2.
3.
INSTALLATION
Wall Mount
Mullion Mount
Electric Gang
Box Mount
Upper
6-32 hole
3.3”
(8.38cm) 1/2”hole
1.7”
(4.31cm)
6-32 hole
6-32 or M3 Screws
Reader
Module
Bezel
6-32 or M3 Screws
Gang Box
Reader
Module
Bezel
Lower
8
_
Installation and External Connection
PRECAUTIONS ON INSTALLATION
If installing on a metal wall
If you install the reader on a metal wall, the read range may
be reduced.
To avoid this problem, it is recommended to insert the
spacer between the metal wall and the reader as shown
below.
Metal
Wall
Spacer
Reader
QUICK GUIDE
English_9
ENG
If installing more than one reader side by side or front and back
If you install more than one reader side by side or
front and back, the read range may be reduced. In
this case, if you present a card to one reader, the
other reader may recognize the same card, meaning
both readers read the same card simultaneously.
To avoid this problem, keep at least 20 cm of space
between the two readers.
BACK TO BACK
INSTALLATION
<Front and Back>
<Side by Side>
#Reader 2
#Reader 1
Minimum
20cm
#Reader 1
#Reader 2
Minimum
20cm
10
_
Installation and External Connection
EXTERNAL CONNECTION
Wiring Diagram
Blue
Yellow
RS-232(GND)
RS-232(TX)
Red Black
Buzzer Control In
LED Control In
DC +12V GND
SSA-R1001/SSA-R1101
Wiegand Data 0 Out
Wiegand Data 1 Out
Green
White
Purple
Black
PCCONTROLLER
POWER
Altri manuali per SSA-R1001
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Samsung Controllori di accesso IP
Samsung
Samsung SSA-R1000V Manuale utente
Samsung
Samsung SSA-S2000W Manuale utente
Samsung
Samsung SSA-S1000 Manuale utente
Samsung
Samsung SSA-P400 Manuale utente
Samsung
Samsung SSA-S2000V Manuale utente
Samsung
Samsung SSA-S1000V Manuale utente
Samsung
Samsung SSA-S2100 Manuale utente
Samsung
Samsung Techwin SSA-R1001V Manuale utente
Samsung
Samsung SSA-R2010 Manuale utente
