Samsung PPM 42H3 Manuale utente

PDP-MONITOR

(PLASMA DISPLAY PANEL)

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PICTURE INPICTURE (PIP)

VIDEO WALL

MDC (MULTIPLE DISPLAY CONTROL)

Intended for Commercial Use and Operation

0108 D55B-BN68-00589A-00_ENG 1/8/04 4:02 PM Page 1

ENG

Thank You for Choosing Samsung!

Thank you for choosing Samsung! Your new Samsung product represents the latest in PDP

technology. We designed it with easy-to-use on-screen menus, making it one of the best

products in its class. We are proud to offer you a product that will provide convenient,

dependable service and enjoyment for years to come.

Important Warranty Information Regarding PDP Format

Viewing

Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily

designed to view wide screen format full-motion video. The images displayed on them should primarily

be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and

constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on

non-expanded standard format PDP video and programming, should be limited to no more than 5% of

the total PDP viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays,

station logos, web sites or computer graphics and patterns, should be limited as described above for all

PDP displays. Displaying stationary images that exceed the above guidelines can cause uneven aging of

PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid

this, vary the programming and images, and primarily display full screen moving images, not stationary

patterns or dark bars. On PDP models that offer picture sizing features, use these controls to view

different formats as a full screen picture.

Be careful in the selection and duration of PDP formats used for viewing. Uneven PDP aging as a result

of format selection and use, as well as burned-in images, are not covered by your Samsung limited

warranty.

DNIeTM (Digital Natural Image engine)

This feature bring you more detailed image with 3D noise reduction, detail enhancement, contrast

enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer,

much detailed image to you. DNIeTM technology will fit every signals into your eyes.

0108 D55B-BN68-00589A-00_ENG 1/8/04 4:02 PM Page 2

ENG

Owner’s Instructions

Remote Control/

AAA Batteries

Power Cord

PC Cable

Ferrite Cores for

Speaker Wire

(2EA)

Checking Parts

Speaker Wires

(2EA)

MDC Cable

(RS232C)

1 Install CD

MDC Software (RS232C)

User Instructions

◆Screen Image retention

Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the

plasma display panel for more than 2 hours as it can cause screen image retention. This image

retention is also known as “screen burn”. To avoid such image retention, reduce the degree of

brightness and contrast of this screen when displaying a still image.

◆Cell Defect

The plasma display panel consists of fine cells. Although the panels are produced with more than

99.9 percent active cells, there may be some cells that do not produce light or remain lit.

◆Height

The PDP can normally operate only under 2000m in height. It might abnormally function at a place

over 2000m in height and do not install and operate there.

◆Warranty

-Warranty does not cover any damage caused by image retention.

-Burn-in is not covered by the warranty.

➢The PPM42H3 model uses the same MDC program CD used for PPM50H3/PPM63H3 models.

Stand-Base

(2EA)

Screws

(4EA)

0108 D55B-BN68-00589A-00_ENG 1/8/04 4:02 PM Page 3

ENG

Contents

◆FOREWORD

■Important Warranty Information Regarding PDP Format Viewing................. 2

■User Instructions............................................................................................ 3

◆CONNECTING AND PREPARING YOUR DISPLAY

■Your New Plasma Display Panel................................................................... 6

■Becoming Familiar with the Remote Control................................................. 8

■Inserting the Batteries in the Remote Control................................................ 9

■Assembling the Stand-Base.......................................................................... 9

■Installing the Display on the Wall Attachment Panel..................................... 10

■Before Using the Video Wall and the Multiple Display Contol function ......... 12

■Connecting Speakers.................................................................................... 13

■Switching On and Off..................................................................................... 15

■Choosing Your Language.............................................................................. 15

◆USING YOUR DISPLAY

■Selecting the Color System (Video or S-Video Mode)................................... 16

■Changing the Picture Mode........................................................................... 16

■Adjusting the Picture Settings........................................................................ 17

■Adjusting the Picture Settings (PC or DVI Mode).......................................... 18

■Selecting the Picture Size.............................................................................. 19

■Activating/Deactivating the Digital Noise Reduction Feature ........................ 19

■Freezing the Current Picture ......................................................................... 20

■Changing the Sound Mode............................................................................ 20

■Adjusting the Sound Settings ........................................................................ 21

■Extra Sound Settings..................................................................................... 22

Auto Volume

Melody

Pseudo Stereo / Virtual Surround

■Adjusting the Screen Position and Scale....................................................... 23

■Adjusting the Image Preferences (PC Mode)................................................ 24

0108 D55B-BN68-00589A-00_ENG 1/8/04 4:02 PM Page 4

ENG

Contents (continued)

◆USING YOUR DISPLAY (CONTINUED)

■Locking the Control buttons........................................................................... 25

■Setting the MDC (Multiple Display Control)................................................... 25

■Protecting the Screen Burning....................................................................... 26

■Setting the Multiple Screen............................................................................ 27

■Displaying the PC Information....................................................................... 28

■Displaying the Setting Information................................................................. 28

■Setting and Displaying the Current Time....................................................... 29

■Switching On and Off Automatically.............................................................. 30

■Setting the Film Mode.................................................................................... 31

■Viewing the Picture In Picture (PIP) .............................................................. 32

■Listening to the Sound of the Sub Picture..................................................... 34

◆ADDITIONAL INFORMATION AND CONNECTIONS

■Viewing Pictures From External Sources...................................................... 34

■Connecting to the Audio/Video Input............................................................. 35

■Connecting to the S-Video Input.................................................................... 36

■Connecting to the DVD/DTV RECEIVER Input............................................. 36

■Connecting to the DVI Input .......................................................................... 37

■Connecting to the RGB(PC) Input................................................................. 37

■Setting up Your PC Software (Windows only)............................................... 38

■Pin Configurations......................................................................................... 39

■Input Mode (PC/DVI)..................................................................................... 40

■Power Saver (PC1 mode only)...................................................................... 41

◆RECOMMENDATIONS FOR USE

■Troubleshooting: Before Contacting Service Personnel................................ 42

■Care and Maintenance.................................................................................. 42

■Technical Specifications................................................................................ 43

☛➢

Press Important Note

Symbols

0108 D55B-BN68-00589A-00_ENG 1/8/04 4:02 PM Page 5

ENG

Your New Plasma Display Panel

Front Panel

Speaker Speaker

abc

SOURCE

-External input selection.

-Store your settings in the menu.

-When the Main menu is displayed on screen,

the Main menu is not operated with source key.

Menu display and exit.

VOL +

-Volume adjustment.

-Adjust an option value respectively.

(VOL + : Enter to the selected menu.)

▼ SEL ▲

Control the cursor in the menu.

I /

Press to turn the PDP on and off.

Power Indicator

-Power Off; Red

-Power On; Off

-Timer On; Green

Remote Control Signal Receiver

Aim the remote control towards this spot on the

PDP.

0108 D55B-BN68-00589A-00_ENG 1/8/04 4:02 PM Page 6

Your New Plasma Display Panel

ENG

Rear Panel

a) RS232C

IN :Used for the MDC function when connecting

PC or RS232C output of another PDP.

OUT :Used for the MDC function when

connecting with RS232C input of another

PDP.

b) DVI IN

Connect to the video output jack for device with

DVI output.

c) AUDIO

Connect to the audio output jack on your PC or any

device with DVI output. (It is audio input for b, d,

and e.)

d) RGB1(PC1) IN

Connect to the video output jack on your PC.

e) COMPONENT2/RGB2(PC2) IN

Connect for input of an Analog RGB or Y/Pb/Pr

video signal from in PC, DVD, or HD devices.

➢“PC Mode” from this page onward means

PC1/PC2 mode using RGB1(PC1) and

RGB2(PC2).

f) VIDEO IN

Video and audio inputs for external devices, such as

VCR, DVD, video game device or video disc players

(or for external devices with an S-Video output;

S-VIDEO).

g) COMPONENT1 IN

Video (Y/Pb/Pr) and audio (L/R) inputs for

component.

h) VIDEO OUT (VIDEO / L-AUDIO-R)

Used to output screen of Video or S-Video in PDP

when connecting video and/or audio input of

external devices.

i) EXT SPEAKER (8Ω)

Connect external speakers.

j) POWER IN

Connect the supplied power cord.

➢For further details about connection, refer to pages 35~37.

0108 D55B-BN68-00589A-00_ENG 1/8/04 4:02 PM Page 7

Becoming Familiar with the Remote Control

ENG

PDP ON

NUMERIC BUTTONS

VOLUME INCREASE

TEMPORARY SOUND SWITCH-OFF

➣Press it again , or

/+ button

to turn the sound back on.

DISPLAY AND CLOSE THE MENU/

RETURN TO THE PREVIOUS MENU

MOVE TO THE REQUIRED MENU

OPTION/

ADJUST AN OPTION VALUE

RESPECTIVELY

SCREEN EFFECT SELECTION

(BURNING PROTECTION)

PICTURE MODE SELECTION

EXTERNAL INPUT SELECTION

CURRENT TIME DISPLAY

SOUND MODE SELECTION

EXIT FROM ANY DISPLAY

PREVIOUS CHANNEL

(NOT AVAILABLE FOR THIS MONITOR)

CHANGE CONFIRMATION

INFORMATION DISPLAY

PIP FUNCTIONS;

-PIPON/OFF

- SIZE SELECTION (SIZE)

- LOCATION SELECTION (LOCATE)

-INPUT SOURCE SELECTION

(SOURCE)

-INTERCHANGE THE MAIN AND THE

SUB PICTURE (SWAP)

- SOUND SELECTION (S.SEL)

PICTURE SIZE SELECTION

PICTURE STILL

SETTING THE TIMER

AUTO ADJUSTMENT IN PC MODE

PDP OFF

ZOOM/PANNING MENU DISPLAY

(ONLY PC MODE)

MULTIPLE DISPLAY CONTROL

VOLUME DECREASE

NEXT CHANNEL

(NOT AVAILABLE FOR THIS MONITOR)

The remote control is used mainly to:

◆Change sources and adjust the volume

◆Set up the PDP using the on-screen menu system

➢The performance of the remote control may be affected by bright light.

0108 D55B-BN68-00589A-00_ENG 1/8/04 4:02 PM Page 8

ENG

You must insert or replace the batteries in the remote control when

you:

◆Purchase the PDP

◆Find that the remote control is no longer operating

correctly

1Remove the cover on the rear of the remote control by pressing

the symbol downwards and then pulling firmly to remove it.

2Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking

care to respect the polarities:

◆

on the battery against

on the remote control

◆

on the battery against

on the remote control

3Replace the cover by aligning it with the base of the remote

control and pressing it back into place.

Inserting the Batteries in the Remote Control

Assembling the Stand-Base

Fit the Stand-Base into the guide hole on the bottom of

the monitor and tighten the left and right sides using

four screws for each side.

➢

Two or more people should carry the PDP.

Never lay the PDP on the floor because of possible

damage to the screen. Always store the PDP

upright.

0108 D55B-BN68-00589A-00_ENG 1/8/04 4:02 PM Page 9

ENG

Installing the Display on the Wall Attachment Panel

Wall Mount Bracket

Mounting Kits

Plastic Hanger x4Screws x4

How to Adjust Mounting Angle

1Secure the PDP to the wall mount bracket.

(Please refer to the following instructions.)

2Set the angle by pulling the upper end of the

PDP attached to bracket in the direction of the

arrow.

3The angle can be adjusted from 0° to 20° by

±2°.

The wall mount bracket is delivered

separately. Please tighten the captive

screw in the direction of the arrow after

assembling the bracket.

☛This wall mount bracket installation guide is for the WMN4230 model. This installation guide may be

different from the PDP User’s manual. Please refer to the proper installation guide for your product.

Installation Notes

◆

Do not install the PDP on any place other than vertical walls.

◆

To protect the performance of the PDP and prevent troubles, avoid the followings:

Do not install next to smoke and fire detectors.

Do not install in an area subjected to vibration or high voltage.

Do not install near or around any heating apparatus.

◆

Use only recommended parts and components.

◆

Do not install the PDP vertically.

0108 D55B-BN68-00589A-00_ENG 1/8/04 4:03 PM Page 10

Altri manuali per PPM 42H3

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Samsung Monitor

Samsung

Samsung SyncMaster S23A950D Guida utente

Samsung

Samsung SPK4215M Manuale utente

Samsung

Samsung SyncMaster 400DX-3 Manuale utente

Samsung

Samsung SyncMaster 940MG Manuale di installazione e funzionamento

Samsung

Samsung SyncMaster 940NW Manuale utente

Samsung

Samsung SyncMaster 403Tn Manuale utente

Samsung

Samsung SyncMaster 592V Manuale utente

Samsung

Samsung 740B - SyncMaster - 17" LCD Monitor Manuale utente

Samsung

Samsung SyncMaster 460DR-S Manuale utente

Samsung

Samsung SyncMaster 520DX Manuale utente

Samsung

Samsung SyncMaster 400CX-2 Manuale utente

Samsung

Samsung S27B800TGN Manuale utente

Samsung

Samsung SyncMaster 510 MP Manuale utente

Samsung

Samsung CA17K Series Manuale utente

Samsung

Samsung SyncMaster 152MP Manuale utente

Samsung

Samsung S22E395H PLUS Manuale utente

Samsung

Samsung SyncMaster 711NT Manuale utente

Samsung

Samsung 920NW - SyncMaster - 19" LCD Monitor Manuale utente

Samsung

Samsung 2443BWX - SyncMaster - 24" LCD Monitor Manuale utente

Samsung

Samsung SyncMaster 460MP Manuale utente

Samsung

Samsung SyncMaster 732NW Manuale utente

Samsung

Samsung SyncMaster S24B150BL Manuale utente

Samsung

Samsung 400DXn - SyncMaster - 40" LCD Flat Panel... Manuale utente

Samsung

Samsung S27B61 Series Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione