Samsung SyncMaster 400DX-3 Manuale utente

LCD DISPLAY

quick start guide

400DX-3,460DX-3

Introduction

Package Contents

Checking the Contents of the Package

Remove the lock from the package box, as shown in the figure above.

Lift up the package box by

holding the grooves on

both sides of the package

box.

Check the contents of the

package. Remove the Styrofoam

and vinyl cover.

Note

• After unpacking the package, make sure to check the contents of the package.

• Store the packaging box in case you need to move the Product later.

• If any items are missing, contact your dealer.

• Contact a local dealer to purchase optional items.

Unpacking

LCD Display

Manuals

Quick Setup Guide Warranty Card

(Not available in all loca-

tions)

User's Manual

Cables

Power Cord D-Sub Cable

Others

Remote Control

(BP59-00138B)

Batteries (AAA X 2)

(Not available in all loca-

tions)

Sold separately

Semi Stand KIT LAN Cable USB Cable

RGB to BNC Cable RGBtoCOMPONENTCa-

ble Network Box

Introduction

Sold separately

Wall Mount KIT TV Tuner Box HDMI Cable

HDMI-DVI Cable

Your LCD Display

Front

MENU button [MENU]

Opens the on-screen menu and exits from the menu. Also use to exit the

OSD menu or return to the previous menu.

Navigate buttons (Up-Down buttons)

Moves from one menu item to another vertically or adjusts selected menu

values.

Adjust buttons (Left-Right buttons) / Volume buttons

Moves from one menu item to another horizontally or adjusts selected

menu values. When OSD is not on the screen, press the button to adjust

volume.

ENTER button [ENTER]

Activates a highlighted menu item.

SOURCE button [SOURCE]

Switches from PC mode to Video mode. Selects the input source that an

external device is connected to.

[PC] → [DVI] → [AV] → [Component] → [HDMI1] → [HDMI2] →

[DisplayPort] → [MagicInfo] → [TV]

Note

•The RGB/COMPONENT IN port is compatible with RGB (PC) and

Component signals.

Introduction

However, the picture may display abnormally if the connected external

input signal is different from the selected video signal.

• A TV tuner box (sold separately) must be connected to use the TV.

•MagicInfo can only be enabled when a network box is connected.

PIP button

Push the PIP button to turn the PIP screen On / Off.

•PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort / TV(Sold separately)

•DVI : PC

•AV : PC / TV(Sold separately)

•Conponent : TV(Sold separately)

•HDMI1 : PC

•HDMI2 : PC

•DisplayPort : PC / TV(Sold separately)

•TV(Sold separately) : PC / AV / DisplayPort

Power button [ ]

Use this button for turning the LCD Display on and off.

Brightness Sensor (Optional)

Automatically detects the surrounding brightness.

Note

This function is activated only on the models equipped with an auto bright-

ness sensor.

Power indicator

Shows PowerSaver mode by blinking green

Note

See PowerSaver described in the manual for further information regarding

power saving functions. For energy conservation, turn your LCD Display

OFF when it is not needed or when leaving it unattended for long periods.

Remote Control Sensor

Aim the remote control towards this spot on the LCD Display.

Rear

Note

See the "Connections" section for details about cable connections. The LCD Display's con-

figuration at the back may vary slightly depending on the model.

Introduction

POWER S/W ON [

│

] / OFF

Switches the LCD Display On/Off.

POWER

The power cord plugs into the LCD Display

and the wall outlet.

IR OUT/IN

Receives a signal from the remote control

andoutputsthesignalthroughLoopoutwhen

a removable sensor board is connected.

DVI OUT (LOOPOUT)

•Connect a monitor to another monitor

through a DVI, DVI to HDMI cable.

•ConnectaDVIorDVI-HDMIcable to [DVI

OUT (LOOPOUT)] on the product and

[DVI IN] or [HDMI IN] on another monitor.

•HDMI and network signals sent via the

[DVI OUT(LOOPOUT)] port are dis-

played on the second display which has

the [DVI IN] port.

Note

• The Loopout function can be used to du-

plicate the screen of the primary display.

Connect [DVI OUT] on the primary dis-

play to [DVI IN] or [HDMI] on another

display.

• A maximum of 100 monitors can be con-

nected to DVI-Loopout (using a 2m-long

DVI cable). Up to Full HD resolution can

be supported. Compatible input sources

include DVI IN, HDMI IN 1, and HDMI IN

2 (MagicInfo).

Introduction

•The status of the cable may have a great

effect on the Loopout performance.

RGB/COMPONENT IN (PC/COMPO-

NENT Connection Terminal (Input))

•Connect the [RGB/COMPONENT IN]

portonthemonitortotheRGBportonthe

PC using the D-SUB cable.

•Connect the [RGB/COMPONENT IN]

port on the monitor to the COMPONENT

portonthe externaldeviceusingtheRGB

to COMPONENT cable.

•Connect the [RGB/COMPONENT IN]

portonthe monitor totheBNC port onthe

PC using the RGB to BNC cable.

DVI IN (PC Video Connection Terminal)

Connect the [DVI IN] port on the monitor to

the DVI port on the PC using the DVI cable.

RGB/DVI/DP/HDMI AUDIO IN (PC/DVI/

DP/HDMI Audio Connection Terminal (In-

put))

Connect the [RGB/DVI/DP/HDMI AUDIO

IN] terminal of the monitor and the speaker

output terminal of your computer's sound

card using a stereo cable (sold separately).

DP IN

Receives a signal from the Display port.

ConnectaDPcableto[DPIN]ontheproduct

and DP IN on another display.

AV/COMPONENT AUDIO IN [R-AUDIO-

Connect the [AV/COMPONENT AUDIO IN

[R-AUDIO-L]]portonthemonitortotheaudio

output port on the PC or on the external de-

vice using an audio cable.

AV IN

Connect the [AV IN] terminal of your monitor

to the video output terminal of the external

device using a VIDEO cable.

AUDIO OUT

Introduction

Connect a headphone or an External speak-

er.

DC OUT

Make sure to use connecting [DC OUT] ter-

minal to the authorized TV-Tuner Box

[SBB_DTC/ZA].

Otherwise, this may result in damage

to the product.

HDMI IN 1

•Connect the [HDMI IN 1] terminal at the

back of your LCD Display to the HDMI

terminal of your digital output device us-

ing a HDMI cable.

• Up to HDMI 1.3 can be supported.

Note

•A normal external device (DVD player or

camcorder,etc.) ora TV tunerbox canbe

connected to the [HDMI IN 1] terminal.

•To use a TV tuner box, make sure to con-

nect it to the [HDMI IN 1] terminal.

HDMI IN 2 (MAGICINFO)

•Connect the [HDMI IN 2 (MAGICINFO)]

terminal at the back of your LCD Display

tothe HDMI terminalof your digitaloutput

device using a HDMI cable.

• Up to HDMI 1.3 can be supported.

Note

Touse MagicInfo, the network box specified

separately by Samsung must be installed in-

side the product and the MagicInfo output of

the network box must be connected to the

[HDMI IN 2 (MAGICINFO)] terminal.

For more information on how to purchase

and install a network box, contact Samsung

Electronics.

Introduction

RJ 45 MDC (MDC PORT)

MDC(Multiple Display Control) Program Port

ConnecttheLANcableto[RJ45MDC]onthe

productand LANon the PC. To use an MDC,

the MDC program must be installed on the

PC.

Note

Go to Multi Control and select RJ45 MDC

as the MDC Connection.

RS232C OUT/IN (RS232C Serial PORT)

MDC(Multiple Display Control) Program Port

Connect a serial cable (cross type) to

[RS232C]onthe productandRS232Conthe

PC. To use an MDC, the MDC program must

be installed on the PC.

Note

Go to Multi Control and select RS232C

MDC as the MDC Connection.

Kensington Lock slot

AKensingtonLockisananti-theftdevicethat

enablesuserstolocktheproductsothat they

cansafelyuseit in publiclocations.Sincethe

shape and usage of the locking device may

differ depending on the model and the man-

ufacturer, for more information, refer to the

UserManualsuppliedwiththelockingdevice

for more information.

Note

You must purchase the Kensington Lock

separately.

To lock the product, follow these

steps:

1. Wrap the Kensington lock cable around

a large, stationary object such as a desk

or chair.

2. Slide the end of the cable with the lock

attached through the looped end of the

Kensington lock cable.

Introduction

3. Insert the Kensington Lock into the se-

curity slot ( ) on the back of the dis-

play.

4. Lock the lock ( ).

Note

•These are general instructions. For exact

instructions, see the User Manual sup-

plied with the locking device.

•You can purchase the locking device

from an electronics store, an online shop,

or our service center.

Connecting a Network Box (sold separately)

PC OUT

MagicInfo video output port

MAGICINFO OUT

This is the output terminal for the video, au-

dio, and control signals of MagicInfo. It can

be used by connecting it to the [HDMI IN 2

(MAGICINFO)] terminal using an HDMI ca-

ble.

LAN (LAN Connection Terminal)

Connects to a LAN cable to allow Internet or

network access in MagicInfo mode.

Connecting a Network Box (sold separately)

USB (USB Connection Terminal)

Keyboard / Mouse, Mass Storage Device

Compatible.

AUDIO OUT

Connect a headphone or an External speak-

er.

RS232C (RS232C serial port)

Serial port

Connecting a Network Box (sold separately)

Introduction

Altri manuali per SyncMaster 400DX-3

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Samsung Monitor

Samsung

Samsung 460UTN-UD - 46" LCD Video Wall Display Guida utente

Samsung

Samsung SyncMaster XL2270 Manuale utente

Samsung

Samsung 400FP-2 - SyncMaster - 40" LCD Flat Panel... Manuale utente

Samsung

Samsung SyncMaster 753DF Manuale utente

Samsung

Samsung SyncMaster 711MP Manuale utente

Samsung

Samsung SYNCMASTER 700DX-2 Manuale utente

Samsung

Samsung S27CM50 Series Manuale utente

Samsung

Samsung 2033SW - SyncMaster - 20" LCD Monitor Manuale utente

Samsung

Samsung OH65F Manuale utente

Samsung

Samsung S27A70 Series Manuale utente

Samsung

Samsung CFG7 Series Manuale utente

Samsung

Samsung SyncMaster 592V Manuale utente

Samsung

Samsung S19E200NY Manuale utente

Samsung

Samsung SyncMaster 732N Manuale utente

Samsung

Samsung SyncMaster 172MP Manuale utente

Samsung

Samsung C34G5 T Series Manuale utente

Samsung

Samsung SyncMaster 2033SN Manuale utente

Samsung

Samsung SyncMaster FX2490HD Guida utente

Samsung

Samsung S27R75 Series Manuale utente

Samsung

Samsung 763MB - SyncMaster 763 MB Manuale utente

Samsung

Samsung SyncMaster NC190 Manuale utente

Samsung

Samsung SE200 SERIES Manuale utente

Samsung

Samsung SP-P4251 Manuale utente

Samsung

Samsung CN17A series Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione