Samsung SyncMaster 710NT Manuale utente

Install drivers Install programs

SyncMaster 710NT

Notational

Failure to follow directions noted by this symbol could result in bodily harm or damage to

the equipment.

Prohibited Important to read and understand at all times

Do not disassemble Disconnect the plug from the outlet

Do not touch Grounding to prevent an electric shock

Power

When not used for an extended period of time, set your computer to DPMS.

If using a screen saver, set it to active screen mode.

Do not use a damaged or loose plug.

zThis may cause electric shock or fire.

Do not pull the plug out by the wire nor touch the plug with wet hands.

zThis may cause electric shock or fire.

Use only a properly grounded plug and receptacle.

zAn improper ground may cause electric shock or equipment damage.

Insert the power plug firmly so that it does not come loose.

zA bad connection may cause fire.

Do not excessively bend the plug and wire nor place heavy objects upon

them, which could cause damage.

zThis may cause electric shock or fire.

Do not connect too many extension cords or plugs to one outlet.

zThis may cause fire.

Do not disconnect the power cord while using the monitor.

surge may be caused by the separation and may damage the monitor.

Do not use the power cord when the connector or plug is dusty.

zIf the connector or plug of the power cord is dusty, clean it with a dry

cloth.

zUsing the power cord with a dusty plug or connector may cause an

electric shock or fire.

Installation

Be sure to contact an authorized Service Center, when installing your monitor in

a location with heavy dust, high or low temperatures, high humidity, and exposed

to chemical substances and where it operates for 24 hours such as at airports,

train stations etc.

Failure to do so may cause serious damage to your monitor.

Place your monitor in a location with low humidity and a minimum of

dust.

zFailure to do so may cause electric shock or fire inside the monitor.

Do not drop the monitor when moving it.

zThis may cause damage to the product or the person carrying it.

Install the monitor base in a showcase or shelf so that the end of the

base does not protrude from the showcase or shelf.

zDropping the product may cause damage to the product or the person

carrying it.

Do not place the product on an unstable or small surface area.

zPlace the product on an even, stable surface, as the product may fall

and cause harm to someone walking by, specifically children.

Do not place the product on the floor.

zTake care, as someone, specifically children may trip over it.

Keep any flammable objects such as candles, insecticides or cigarettes

away from the product.

zOtherwise, this may cause fire.

Keep any heating devices away from the power cable.

zA melted coating may cause electric shock or fire.

Do not install the product in places with poor ventilation, for instance, a

bookshelf, closet, etc.

zAny increase in internal temperature may cause fire.

Put down the monitor carefully.

zFailing to do so may damage the monitor.

Do not place the monitor face down.

zThis may damage the TFT-LCD surface.

The installation of the bracket must be done by a qualified professional.

zInstalling the bracket by unqualified personnel may result in injury.

zAlways use the mounting device specified in the owner's manual.

When installing the product, make sure to keep it away from the wall

(more than 10 cm / 4 inchs) for ventilation purposes.

zPoor ventilation may cause an increase in the internal temperature of the

product, resulting in a shortened component life and degraded

performance.

Keep the plastic packaging (bag) out of children’s reach.

zThe plastic packaging (bag) may cause suffocation if children play with

it.

Clean

When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with

a slightly moistened, soft fabric.

Do not spray water or detergent directly onto the monitor.

zThis may cause damage, electric shock or fire.

Use the recommended detergent with a smooth cloth.

If the connector between the plug and the pin is dusty or dirty, clean it

properly using a dry cloth.

zA dirty connector may cause electric shock or fire.

Make sure to unplug the power cord before cleaning the product.

zOtherwise, this may cause electric shock or fire.

Unplug the power cord from the power outlet and wipe the product using

a soft, dry cloth.

zDo not use any chemicals such as wax, benzene, alcohol, thinners,

insecticide, air freshener, lubricant or detergent.

Contact a Service Center or Customer Center for interior cleaning once a

year.

zKeep the product's interior clean. Dust which has accumulated in the

interior over an extended period of time may cause a malfunction or fire.

Others

Do not remove the cover (or back).

zThis may cause electric shock or fire.

zRefer servicing to a qualified servicing company.

If your monitor does not operate normally - in particular, if there

is any unusual sound or smell coming from the monitor -

unplug it immediately and contact an authorized dealer or

Service Center.

zThis may cause electric shock or fire.

Keep the product away from places exposed to oil, smoke or

moisture; do not install inside a vehicle.

zThis may cause a malfunction, electric shock or fire.

zIn particular, avoid operating the monitor near water or

outdoors where it could be exposed to snow or rain.

If the monitor is dropped or the casing is damaged, turn the

monitor off and unplug the power cord. Then contact a Service

Center.

zThe monitor may malfunction, causing electric shock or fire.

Disconnect the plug from the outlet during storms or lightning

or if it is not used for a long period of time.

zFailure to do so may cause electric shock or fire.

Do not try to move the monitor by pulling only the wire or the

signal cable.

zThis may cause a breakdown, electric shock or fire due to

damage to the cable.

Do not move the monitor right or left by pulling only the wire or

the signal cable.

zThis may cause a breakdown, electric shock or fire due to

damage to the cable.

Do not cover the vents on the monitor cabinet.

zBad ventilation may cause a breakdown or fire.

Do not place water containers, chemical products or small

metal objects on the monitor.

zThis may cause a malfunction, electric shock or fire.

zIf a foreign substance enters the monitor, unplug the power

cord and contact a Service Center.

Keep the product away from combustible chemical sprays or

inflammable substances.

zThis may cause an explosion or fire.

Never insert anything metallic into the monitor openings.

zThis may cause electric shock, fire or injury.

Do not insert metal objects such as chopsticks, wire and tools

or inflammable objects such as paper or matches into the vent,

headphone port or AV ports.

zThis may cause electric shock or fire. If an alien substances or

water enters the product, turn the product off, unplug the power

connector from the wall outlet and contact a Service Center.

When viewing a fixed screen for an extended period of time,

residual image or blurriness may appear.

zChange the mode to energy saving mode or set a screensaver

to a changing picture when away from the monitor for an

extended period of time.

Adjust the resolution and frequency to the levels appropriate fo

the model.

zAn inappropriate resolution may cause undesirable picture

quality.

17 inch (43 cm) - 1280 X 1024

Keep the volume at a comfortable level when using the

headphones.

zExcessively loud volume levels may damage hearing.

Viewing the monitor continuously at a too close angle may

result in damage to your eyesight.

To ease eye strain, take at least a five-minute break after every

hour of using the monitor.

Do not install the product on an unstable, uneven surface or a

location prone to vibrations.

zDropping the product may cause damage to the product or the

person carrying it. Using the product in a location prone to

vibrations may shorten the lifetime of the product or may catch

fire.

When moving the monitor, turn off and unplug the power cord.

Make sure that all cables, including the antenna cable and

cables connected to other devices, are disconnected before

moving the monitor.

zFailure to disconnect cables may damage it and cause fire or

an electric shock.

Place the product out of children’s reach, as they could damage

it by hanging onto it.

zA falling product may cause injury to the person or even

fatality.

When not using the product for an extended period of time,

keep the product unplugged.

zOtherwise, this may cause heat emission from the

accumulated dirt or degraded insulation, causing electric shock

or fire.

Do not place your children's favorite toys or any other objects

of interest on the product.

zChildren may try to climb on the product to retrieve an object.

The product could fall, causing physical damage or even death.

Pro

er Seatin

Posture Durin

Monitor Use

zPeriodically take a 10 minute break every hour or so to relieve

eye strain.

zPosition the monitor so that your eyes are slightly higher than

the display panel.

zAdjust the LCD screen panel angle so that the panel faces

downwards.

zAdjust the LCD screen panel so that the reflection of the

illumination is minimized for your comfort.

zKeep your arms parallel to the floor and lightly place your

hands on the keyboard.

zPosition the monitor or chair so that your eyes are slightly

higher than the display panel.

Please make sure the following items are included with your monitor.

If any items are missing, contact your dealer.

Contact a local deale

to bu

tional items.

Unpacking

Monitor

Manual

Quick Setup Guide

Warranty Card

(Not available in all

locations)

User's Guide,

Monitor Driver,

Natural Color software,

MagicTune™ software,

icRotation software

Cable

D-sub Cable Power Cord LAN Cable

Altri manuali per SyncMaster 710NT

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Samsung Monitor

Samsung

Samsung SyncMaster 151 S Manuale utente

Samsung

Samsung S27A60 A Series Manuale utente

Samsung

Samsung 460UTN-UD - 46" LCD Video Wall Display Manuale utente

Samsung

Samsung 400UXn-M - 40" LCD Public Info Display Guida utente

Samsung

Samsung SyncMaster P2050 Guida utente

Samsung

Samsung 2233SW - Full HD Widescreen LCD Monitor Guida utente

Samsung

Samsung 243T - SyncMaster - 24" LCD Monitor Manuale utente

Samsung

Samsung SYNCMASTER 932MP Manuale utente

Samsung

Samsung PPM50M7HB - Plamsa HD Display Guida all'installazione

Samsung

Samsung S27AG320NU Manuale utente

Samsung

Samsung SPM4227 Manuale utente

Samsung

Samsung SyncMaster BX2350 Manuale utente

Samsung

Samsung SyncMaster 510S Manuale utente

Samsung

Samsung LC24RG50FQRXEN Manuale utente

Samsung

Samsung C24RG52FZR Manuale utente

Samsung

Samsung SyncMaster P2270HD Manuale utente

Samsung

Samsung SyncMaster P50FP Guida utente

Samsung

Samsung T28C570EW Manuale utente

Samsung

Samsung MD65C Manuale utente

Samsung

Samsung SyncMaster 400UXn-UD Manuale utente

Samsung

Samsung 940UX - SyncMaster - 19" LCD Monitor Manuale utente

Samsung

Samsung S24C650PL Manuale utente

Samsung

Samsung SyncMaster 943NWX Manuale utente

Samsung

Samsung SyncMaster 955MB Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione