Samsung SyncMaster VC240 Manuale utente

SyncMaster

VC240

Video Conference Monitor

quick start guide

1 Installing the Product

1-1 Package Contents

• Unpack the product and check if all of the following contents have been included.

• Store the packaging box in case you need to move the Product later.

• If any items are missing, contact your dealer.

• Contact a local dealer to purchase optional items.

Monitor

The cleaning cloth is supplied with black high-glossy models only.

CONTENTS

Installation Manual Product Warranty User Manual Power Cord

D-Sub Cable LAN Cable Remote Control Batteries (AAA X 2)

DVI Cable Ferrite Core for LAN cable Stereo Cable Cleaning Cloth

1-2 Installing the Stand

Before attaching the stand, place a soft cloth on a flat, stable surface, and then place the product onto the cloth so that the

screen is facing downwards.

Caution: When placing the product on a flat surface, you can damage the projection on the camera. To prevent damage,

place the monitor down gently and carefully.

Place a soft cloth over a flat, sturdy table, and then place the product onto the cloth so

that the screen is facing downwards.

Turn the stand in the direction indicated by the arrow.

Do not remove the stopper pin before installing the base.

Make sure that the stand has been properly turned in the right direction.

Push the base into the product's stand in the direction indicated by the arrow.

Do not remove the stopper pin before completely installing the stand's base.

Otherwise it may cause physical injury.

Disassembly is in the reverse order of assembly.

Turn the connecting screw at the bottom of the stand fully so that it is completely

fixed.

After installation of the base is complete, stand the product up.

• Remove the stopper pin.

• Adjust the height of the screen to your specifications.

- Caution

Avoid lifting the product holding only the stand.

- Caution

Avoid moving the product only holding it by the camera.

1-3 Removing the Stand

Before removing the stand, place a soft cloth on a flat, stable surface, and then place the product onto the cloth so that the

screen is facing downwards.

Caution: When placing the product on a flat surface, you can damage the projection on the camera. To prevent damage,

place the monitor down gently and carefully.

Place a soft cloth over a table to protect the product, and then place the product onto

the cloth so that the front of the product is facing downwards.

Hold the product's stand as shown in the picture, and then detach the rear cover.

Unfasten the screws indicated as " ."

The stand can be detached after removing the screws.

Hold the main body of the product as shown in the picture.

Lift and separate the unscrewed stand.

Installing the Product 1-4

1-4 Installing a VESA Wall Mount or Desk Mount

This product has a 100 mm x 100 mm / 200 mm x 100 mm VESA compatible stand mount.

To attach a VESA compatible wall mount, follow these steps:

1. Turn the product off, and the unplug the power cord from the wall outlet.

2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down on the cloth or cushion.

3. Detach the rear cover.

4. Remove the stand as described previously.

5. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand,

wall mount stand or another stand) and firmly fix the stand by fastening the screw.

• If you use a screw that is longer than the standard specifications, the inside of the product may be damaged.

• For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ

depending on the corresponding specifications.

• Do not use screws that are incompatible with the standard VESA specifications and do not screw them in using

excessive force.

This may result in damage to the product or injury due to the product falling.

The company shall not be held liable for any damage or injury.

• Samsung shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible

with the specified specifications or due to an installation not performed by an authorized installation engineer.

• When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of clearance from

the wall.

• Samsung shall not be held liable for any problems caused by using a stand that is not compatible with the specified

specifications.

• Use the wall mount according to the specifications of your country.

A. Stand Mount

B. Stand (Optional)

A B

1-5 Installing the Product

1-5 Connecting with a PC

The connecting parts may differ depending on the product model.

• Connect the monitor to your PC as illustrated when you intend to use the monitor as a computer display only, and do not

intend to use the video call function.

• To connect the monitor and use it as a computer display only, follow these steps:

1. POWER S/W : Turns the product on and off.

2. Connect one end of the power cord to the [

POWER

] port of the product and connect the other end of the power cord to the

220V or 110V wall outlet.

The monitor recognizes the input voltage and switches automatically.

3. Connect the product to a PC depending on the video output supported by the PC.

3-1. When the graphics card provides

DVI

(

Digital

) output

Connect the [DVI IN] port of the product to the DVI port of the PC with the DVI cable.

3-2. When the graphics card provides

D-Sub

(

Analog

) output

Connect the [RGB IN] port of the product to the [RGB IN] port of the PC with the D-Sub cable.

4. SERVICE : Dedicated to A/S

5. Connect the [

AUDIO IN

] port on the rear side of the monitor to the sound card of the PC.

After the

product is connected to a PC, you can turn the product on and use it.

When both the DVI (<DVI>) and D-Sub (<PC>) cables are connected, you can select the input signal <PC or DVI> by

pressing the [ /SOURCE] button.

Computer

DVI INPOWERPOWER S/W RGB IN AUDIO INSERVICE

13-1 3-2 4 52

Installing the Product 1-6

1-6 Connecting to the Video Conference Monitor

The connecting part may differ depending on the product model.

• Connect the monitor to your PC as illustrated when you intend to use the monitor as a computer display and to send and

receive video calls or participate in video conferences.

• Ensure that only one of the two [LAN] ports is connected to the network using a LAN cable.

To connect the monitor to your PC and use it as a computer display and for video calls and video conferences, follow these

steps:

1. POWER S/W : Turns the product on and off.

2. Connect one end of the power cord to the [

POWER

] port of the product and connect the other end of the power cord to the

220V or 110V wall outlet.

The monitor recognizes the input voltage and switches automatically.

3. Connect between the [

LAN

] port on the product and your network using a LAN cable.

4. Connect the LAN cable between the [

LAN

] port on the product and the [

LAN

] port on your PC.

You do not have to connect the monitor to a PC to make video calls.

When using the same IP for both the PC and the Video Conference Monitor, you must connect the LAN cables as shown above.

SERVICE

: Dedicated to A/S

6. Connect the headphone cable to the headphone port on the product.

Connect it only when needed, since this product has an internal speaker. Note that it can only be used for a video call.

7. Connect the microphone cable to the microphone port on the product.

Connect it only when needed, since this product has an internal microphone. Note that it can only be used for a video call.

Once the connection is finished, turn on the power and press the [ /SOURCE] button to select <

> as the input signal.

POWERPOWER S/W SERVICE

1 5432

Computer

Hub

LAN LAN

MIC

1-6 Installing the Product

Ferrite Core

• The ferrite cores are used to shield the cables from interference.

• When connecting a cable, open the ferrite core and clip it around the cable near the plug.

Installing the Product 1-7

1-7 Kensington Lock

A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations.

Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information,

refer to the User Manual supplied with the locking device for more information.

You must purchase the Kensington Lock separately.

To lock the product, follow these steps:

1. Wrap the Kensington lock cable around a large, stationary object such as a desk or chair.

2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.

3. Insert the locking device into the Kensington slot on the Monitor ( ).

4. Lock the lock ( ).

• These are general instructions. For exact instructions, see the User Manual supplied with the locking device.

• You can purchase the locking device from an electronics store, an online shop, or our service center.

Altri manuali per SyncMaster VC240

Indice

Altri manuali Samsung Monitor

Samsung

Samsung SyncMaster ME55A Manuale utente

Samsung

Samsung S34BG850SE Manuale utente

Samsung

Samsung SyncMaster P2050 Manuale utente

Samsung

Samsung HP-R8082 Manuale utente

Samsung

Samsung 920NW - SyncMaster - 19" LCD Monitor Manuale utente

Samsung

Samsung LE55C Manuale utente

Samsung

Samsung 244T - SyncMaster - 24" LCD Monitor Manuale utente

Samsung

Samsung SyncMaster 150MP Manuale utente

Samsung

Samsung PG19N Manuale utente

Samsung

Samsung SyncMaster 2443NW Manuale utente

Samsung

Samsung SyncMaster 750ST Manuale utente

Samsung

Samsung SyncMaster P2770HD Manuale utente

Samsung

Samsung 906BW - SyncMaster - 19" LCD Monitor Manuale utente

Samsung

Samsung NC221 Manuale utente

Samsung

Samsung 1501MP - SyncMaster - 15" LCD Monitor Manuale utente

Samsung

Samsung SyncMaster 320TFT Manuale utente

Samsung

Samsung 320TSN - SyncMaster - 32" LCD Flat Panel... Manuale utente

Samsung

Samsung DC43H Manuale utente

Samsung

Samsung S19C150F Manuale utente

Samsung

Samsung ML17NS Manuale utente

Samsung

Samsung S22B360V Manuale utente

Samsung

Samsung SyncMaster TC220W Manuale utente

Samsung

Samsung SyncMaster 305TPLUS Manuale utente

Samsung

Samsung PL-42S4S Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione