Samsung PS-37S4A1 Guida rapida
Connecting VHF and UHF Antennas
1
Antennas with 75-ohm Round Leads
If your antenna looks like this: it has 75-ohm round leads.
1Plug the antenna lead into the VHF/UHF terminal
on the PDP.
Use the Antenna Cable, an accessory included
in the product package.
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 18
2
Connecting Cable TV
You can connect different cable systems to your PDP, including cable without a cable box,
and cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
1 Plug the incoming cable into the VHF/UHF terminal on
the PDP.
Use the Antenna Cable, an accessory included
in the product package.
Cable with a Cable Box that Descrambles All Channels.
1 Find the cable connected to the ANTENNA OUT
terminal on your cable box. This terminal might be
labeled "ANT OUT", "VHF OUT" or simply "OUT".
2 Connect the cable to the VHF/UHF terminal on the
PDP.
Use the Antenna Cable, an accessory included
in the product package.
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 19
3
Cable with a Cable Box that Descrambles Some (But Not All) Channels
To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial
cables (which you can buy from your Samsung dealer or any electronics store).
1Find and disconnect the cable that is con-
nected to the ANTENNA IN terminal of
your cable box.
This terminal might be labeled "ANT IN",
"VHF IN" or simply, "IN". Connect this
cable to a two-way splitter.
2Connect a coaxial cable between an OUT-
PUT terminal of the splitter and the IN termi-
nal of the cable box.
3Connect a coaxial cable between the
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
4Connect a coaxial cable between the
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
5Connect the last coaxial cable between the
OUT terminal of the RF (A/B) switch and
the VHF/UHF terminal on the PDP.
After you've made this connection, set the A/B switch to the "A" position for normal viewing.
Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch
to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually
channel 3 or 4.)
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 20
4
Connecting a VCR
Connecting a VCR to the Video or S-Video/Audio jack
S-Video Cable
Audio Cable
or Video Cable
Power Plug
Connect the Video/Audio cables between the AUDIO(L/R)/VIDEO jacks on the PDP and
AUDIO/VIDEO OUT jacks on the VCR. (Note: For better video, you can use an S-Video cable.)
Videotape Playback:
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “Video” or “S-Video”.
3. Turn on your VCR, insert a videotape and press the play button.
How to Connect
PDP
VCR
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 21
5
Connecting a Camcorder
Audio Cable
Video Cable
Power Plug
Connect a Video/Audio cable between the AUDIO(L/R)/VIDEO jacks on the PDP and the
VIDEO/AUDIO OUTPUT jacks on the camcorder.
Viewing Tapes
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “Video”.
3. Turn on your camcorder and set it to Video Mode. (For details, refer to your camcorder
Owner’s instructions.)
4. Set the IN/OUT switch on your camcorder to OUT.
5. Insert the tape into the camcorder and press the Play button.
How to Connect
Viewing camcorder tapes
PDP
Camcorder
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 22
6
Connecting a DVD Player (480i, 480p)
This PDP displays the optimum picture in 720p mode.
Playing DVD
Audio Cable
Video Cable
Power Plug
Connect a Video Cable between the Y, Pb, Pr(COMPONENT) input jacks on the PDP and
Y/PB/PRoutput jacks on the DVD player.
Connect a Audio Cable between the AUDIO L/R(COMPONENT) input jacks on the PDP and
the AUDIO OUT jacks on the DVD player.
To Play DVD:
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “COMPONENT”.
3. Turn on your DVD player, insert a DVD disc and press the Play button.
• For an explanation of Component video, see your DVD owner’s instructions.
How to Connect
1
2
PDP DVD Player
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 23
Connecting a DTV Receiver
(480p, 720p, 1080i)
This PDP displays the optimum picture in 720p mode.
7
Watching DTV
Video Cable
Audio Cable
DVI Cable
or
Power
Plug
Connect the cable or antenna to the antenna input jack on the DTV.
Connect a Video cable between the Y, Pb, Pr(COMPONENT) or DVI jack on the PDP and the
Y, PB, PR(VIDEO OUTPUT JACKS) on the DTV receiver.
Connect an Audio cable between the COMPONENT (L/R AUDIO) or DVI jacks on the PDP
and the AUDIO OUTPUT jacks on the DTV receiver.
To Watch DTV:
1. Turn on your PDP.
2. Press the TV/VIDEO button to select “COMPONENT” or “DVI”.
3. Turn on your DTV receiver.
• For an explanation of Component video, see your DTV receiver owner’s instructions.
How to Connect
1
2
3
Use a DVI-D connection cable. (sold separately)
PDP
DTV Receiver
2_BN68-00631A-04_Eng 5/20/04 10:16 AM Page 24
Altri manuali per PS-37S4A1
2
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Samsung TV al plasma
Samsung
Samsung PS43F4500AW Manuale utente
Samsung
Samsung PS42A456P2D Manuale utente
Samsung
Samsung PS42A450P1 Manuale utente
Samsung
Samsung Series 4+ Manuale utente
Samsung
Samsung PL-42A450 Manuale utente
Samsung
Samsung PS42S5HX/XEH Manuale utente
Samsung
Samsung PN64F8500AF Manuale utente
Samsung
Samsung PS-42E71H Manuale utente
Samsung
Samsung PN60E6500 Manuale utente
Samsung
Samsung PS43E450A1W Manuale utente
Samsung
Samsung PS-42P4H1 Manuale utente
Samsung
Samsung PN50A50SF Manuale utente
Samsung
Samsung PANTALLA PDP PROFESSIONAL PPM42M6H Manuale utente
Samsung
Samsung OfficeServ 7000 Series Manuale utente
Samsung
Samsung HP-P5071 Manuale utente
Samsung
Samsung PS51E8000GU Manuale utente
Samsung
Samsung PS42B450B1W Manuale utente
Samsung
Samsung Series 4+ Manuale utente
Samsung
Samsung 650 Series Manuale utente
Samsung
Samsung HP-R5052 Guida all'installazione
