Samsung SmartThings Vision Manuale utente

SmartThings Vision

Welcome to your

Smart Light

DVS Sensor

Indicator LED

Function Button

USB Charging Port

Light Sensor

Holder

Installation Guide

Indoor installation is recommended. Avoid installing in wet or humid place, otherwise it

may cause malfunctions.

Avoid installing in high temperature environment or near a radiator, heating device,

stove, and other heat sources (including an ampliﬁer).

This product must be attached to ﬂat and clean wall surface. Remove the ﬁlm on the

tape before use. In addition, holder can be attached to iron surface or furniture by

utilizing magnet on the holder.

Avoid installing on the appliances that generate vibration, such as refrigerator or air

conditioner. Otherwise it may cause malfunctions.

Since this product connects to WI-FI, please avoid installing it near devices that emit

strong EM waves.

In the event of device fails to operate:

Please unplug the power cable and plug again after1 minute.If this status persists,

press and hold the function button for more than 7 seconds to reset the device.

Reset takes several minutes. Please do not unplug the power cable before indicator LED

status alternately ﬂashes green and red light.

Trouble Shooting

Recommended

installation height ：

1.5m ~ 1.7m

In the event of Internet is disconnected:

The indicator light shows red. Please check your internet connection.

In the event of app fails to operate:

Please re-start the app. If this status persists, please visit www.SmartThings.com.

1.5m~1.7m

Power on Green On

Green Blinking System boot

Setting standby status Alternately ﬂashes

green and red light

Setting error Red Blinking

Person detected Yellow Blinking for 3 seconds

Function error

Network error

Red Blinking

Red On

Error

Status

Power off No light

LED Status Indicator

※

After login，select “+", and add

device.

Connect your phone to WI-FI where device is used, and

download SmartThings App.

SmartThings

2. 3. Select "SmartThings", in the

"All brands" tab.

Plug the power cable, and wait LED

indicator ﬂashes green and red

alternately.

4. 6.5.

After click “Vision sensor”，select “SmartThings Vision”. After setup location for your

SmartThings Vision, click next.

7. Scan the QR code on the device,

as shown in the picture.

If QR code on device or package

is damaged or fell off, device

will be unable to setup. Please

keep QR code safe.

8. The installation will begin after

scanning QR code.

9. After the installation is ﬁnished,

completion status is as shown in the

picture.

Connecting to Vision sensor

Plug yourVision sensor into an outlet

and wait until the left light starts

blinking green and red.

Add yourdevice by scanning its

QR code.

The code or serial numbermay be on the

back of the device or in the instruction

booklet.

Enter serial number instead

※

My home

Kitchen >

Living room >

No devices

Add device

All brands

SmartThings

Auto detect

SmartThings

vision sensor

My home-Living room

Successfully connected

SmartThings Vision

SmartThings

vision sensor

Vision sensor

SmartThings Vision

Select a location for yourVision sensor.

My home

Add new location

Altri manuali Samsung Telecamera di sicurezza

Samsung

Samsung SyncMaster 171S Manuale utente

Samsung

Samsung SCV-6023R Manuale utente

Samsung

Samsung IPOLIS SNC-570 Manuale utente

Samsung

Samsung SVD4600 Series Manuale utente

Samsung

Samsung SCC-B5203P Manuale utente

Samsung

Samsung SNB-6010A Manuale utente

Samsung

Samsung SCC-C6407 Manuale utente

Samsung

Samsung SNP-3350 Manuale utente

Samsung

Samsung SNC-C7478 Manuale utente

Samsung

Samsung SNC-B5395 Manuale utente

Samsung

Samsung SPU-3750T Manuale utente

Samsung

Samsung SCC-C6455N Manuale utente

Samsung

Samsung SDZ-300 Manuale utente

Samsung

Samsung SCC-B5394 Manuale utente

Samsung

Samsung SPD-3000 Manuale utente

Samsung

Samsung SND-6084R Manuale utente

Samsung

Samsung SNC-B2335P Manuale utente

Samsung

Samsung SNF-7010 Manuale utente

Samsung

Samsung SCC-B5313 Manuale utente

Samsung

Samsung SID-560 Manuale utente

Samsung

Samsung SNV-7084R Manuale utente

Samsung

Samsung SOC-4030 Manuale utente

Samsung

Samsung SCC-C6413P Manuale utente

Samsung

Samsung SNP-6320 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Lumens

Lumens VC-A50PNW Manuale utente