Samsung MU-PS1T0B Manuale utente

User Manual and Warranty Statement

MU-PS1T0B MU-PS500B MU-PS250B

Rev. 1.0

LEGALITIES

LEGAL DISCLAIMER

SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND

SPECIFICATIONS WITHOUT NOTICE.

Products and specifications discussed herein are for reference purposes only. All information discussed

herein may change without notice and is provided on an “AS IS” basis, without warranties of any kind.

This document and all information discussed herein remain the sole and exclusive property of Samsung

Electronics. No licence of any patent, copyright, mask work, trademark or any other intellectual property

right is granted by one party to the other party under this document, by implication, estoppels or

otherwise. Samsung products are not intended for use in life support, critical care, medical, safety

equipment, or similar applications where product failure could result in loss of life or personal or physical

harm, or any military or defence application, or any governmental procurement to which special terms

or provisions may apply. For updates or additional information about Samsung products, contact

your nearest Samsung office. All brand names, trademarks and registered trademarks belong to their

respective owners.

Table of Contents

1. Getting Started............................................................................................................................... 4

Box Contents............................................................................................................................................. 4

System Requirements........................................................................................................................... 4

T1 File System........................................................................................................................................... 5

Capacity of T1........................................................................................................................................... 5

2. Using T1............................................................................................................................................6

Connecting to a PC................................................................................................................................. 6

Activation ................................................................................................................................................... 6

Use after Activation................................................................................................................................ 8

Configuration............................................................................................................................................ 9

3. Unmounting..................................................................................................................................11

4. Precautions ...................................................................................................................................11

5. Specifications and Certifications..........................................................................................13

6. Samsung Portable SSD T1 Limited Warranty....................................................................14

1. Getting Started

Before using your Samsung Portable SSD T1 (referred to as T1), please read the User Manual thoroughly

and ensure that you use the product in a safe and appropriate manner. The images shown in this User

Manual may differ from the actual product, and the contents of this manual may be subject to change

without prior notice.

❙Box Contents

*Please make sure that all the

contents are included in the box

after purchase.

Box contents may differ depending

on the packaging type.

Samsung Portable

SSD T1

User Manual and

Warranty Certificate

USB 3.0 cable

❙System Requirements

The following requirements must be met in order to make full use of the fast data transfer speed of your

T1.

1 PCs with USB 3.0 support

USB (Universal Serial Bus) is a serial input/output technology for connecting computers to

peripherals. USB 3.0 (5Gbps) supports up to 10 times faster data transfer than USB 2.0 (480

Mbps). The T1's data transfer speed is optimal when connected via USB 3.0. Using a lower

version such as USB 2.0 or 1.1 will result in reduced performance.

*Performance may vary depending on each user's system, even when using a USB 3.0

connection. In particular, when UASP (USB Attached SCSI Protocol) is not supported,

performance may be impaired. Confirm the compatibility from the host PC.

Caution: When your T1 is connected to a device that only supports USB 2.0 or 1.1, the device

may not recognise your T1 or may display a popup suggesting that formatting is required. If

your T1 is formatted as suggested in this popup, any data stored on the device will be deleted

permanently. Do not format your device. When you connect your T1 to a device that supports

the USB 3.0 standard, the T1 will be recognised and you will be able to use it.

2 Connecting T1 to USB ports on devices other than PCs

Using the T1 by connecting it to devices other than PCs that support USB may be restricted,

depending on the USB specifications and operating system (OS) of each device. When using the

T1 with devices other than PCs (e.g.: TVs, printers, audio players or other devices that support

USB), please check the specifications of each device first.

3 Recommended PC Specifications

yWindows OS: Windows 7 or higher

yMac OS: Mac 10.7 or higher

yUSB 3.0 port

PC connector Product connector

❙T1 File System

Your T1 is formatted using the exFAT file system by default to support both Windows OS and Mac OS.

Please note that there may be restrictions on reading or writing data when using your T1 on both

Windows OS and Mac OS. If you plan to only use the T1 on a single OS, it is recommended that you

format your T1 using the appropriate file system for the OS.

Important Information:

Read/write capabilities of Windows OS and Mac OS by file system.

File System Windows OS Mac OS

exFAT Both read and write Both read and write

NTFS Both read and write Read only

HFS Not recognised Both read and write

*When using exFAT on both operating systems, data writing may become locked and you may

only be able to read data. If such a problem occurs, you can restore write access by following the

instructions below.

1 Mac OS: Connect your T1 to your Mac OS again, and then eject the volume (T1).

2 Windows OS: In the notification window that appears when write access is disabled, click Scan

and Fix. Then run Check Disk (CHKDSK).

If you closed Check Disk, you can run Check Disk by selecting the drive right-click choose

Properties choose Error-Checking under the Tools tab.

*When your T1 is connected to a device other than a PC, usage may be restricted depending

on the file system supported by the OS of the device and the file system of the data stored on

your T1. Please check the device's supported file systems before use. Please note that if T1 is

formatted using a different file system in order to enable use with a particular device, all user

data stored on your T1 will be deleted during formatting. Once formatted, user data cannot be

recovered.

❙Capacity of T1

When your T1 is connected to a PC, the capacity displayed on the system (Windows Explorer on

Windows OS) may vary from the capacity marked on the product, depending on the drive's file system,

partitioning and computer system.

*The capacity marked on the product is calculated according to the following standard:

1MB = 1,000,000bytes / 1GB=1,000,000,000bytes / 1TB=1,000,000,000,000bytes

2. Using T1

Important Information:

Your T1 is partitioned into a security partition and a data storage partition by default in order to provide

a higher level of security. The T1 is preconfigured to display only the security partition under factory

settings. Therefore, to use the data storage partition, your T1 must be activated on a PC. The T1

cannot be activated if the PC does not fulfill the recommended specifications or if the T1 is connected

to the USB port of a device other than a PC. Please activate the product using a PC that meets the

recommended specifications.

❙Connecting to a PC

Connect the T1 to a desktop PC or laptop

using a USB port as shown in the figure

below.

If connected properly, only the security

partition (128 MB on Windows 7) will be

displayed on the PC. Once the device is

activated using the supplied activation

software, the entire data storage partition

will be recognised by the PC.

❙Activation

Running the software

You can activate your T1 by using the appropriate software.

During the activation process, you can designate a unique name for your T1 and enable password

protection for data security.

1 In Windows Explorer (Windows OS) or Finder (Mac OS), select the T1_Setup drive launch icon.

Windows OS Mac OS

Samsung Portable SSD.exe Samsung Portable SSD.app

2 Double-click the launch icon to run the software.

3 Activating the T1

Activate the T1 by following the instructions displayed by the software. During activation, only

certain files are copied to the PC for user convenience.

To activate your Samsung Portable SSD,

please complete the following steps.

Welcome

Enter a name (max. 16 characters)

Default Name: Samsung T1

Give your Samsung Portable SSD a name

OK Yes

Would you like to set a password to keep your data secure?

Note: If you should lose your password, the T1 will be unusable and

you will no longer be able to access your data. A factory reset tool

provided by the Samsung Service Centre can be used to reset the T1,

but all of your data will be permanently erased and your password will be reset.

Enable Data Security

1. Initial screen 2. Designate a name for Samsung

Portable SSD

3. Select whether or not to enable

password protection.

*If you click No, activation will

be completed without enabling

password protection.

Set your password

Re-enter your password

Enter your password (4-16 characters)

Finish

Please review the information you have entered

Summary

Name:

Security:

Samsung T1

Enabled

Start Again

Click Finish to complete setup and begin using your Samsung Portable SSD.

4. Set a password (if enabled) 5. Summary (if enabled)

*You can start again from the name

settings by clicking Start Again.

Important Information: On Mac OS, an SAT driver installation screen may appear when the

software runs. The SAT driver is a mandatory system driver for running the T1 activation software.

If you do not install the SAT driver, you will not be able to use T1 on a Mac OS. Install the SAT driver

according to the instructions displayed by the installation software. Once the SAT driver is installed,

disconnect and re-connect the T1 to confirm that the driver has been installed successfully.

Important Information: The manufacturer and retailer are not liable for loss of user data caused by

forgotten or stolen passwords. If you forget your password, your T1 can be restored to its factory

settings at a Samsung Service Centre. However, all user data will be lost in the process. If you

enable password protection, please be extremely careful not to forget or misplace your password.

It is not possible to restore the product to its factory settings at the Service Centre while preserving

user data.

❙Use after Activation

Once activated, you can use the data storage partition of the T1. Depending on whether password

protection was enabled or not during the activation process, usage of the T1 varies as described below.

1 If password protection was enabled in the activation process:

When you connect the product to a PC, a login screen appears. You must enter your password and

click the Log in button to access the data.

Name:

Password:

Samsung T1

Enter your password

Samsung Portable SSD

*If you connect the T1 to a different PC and the login screen does not appear, double-click on

the T1_setup drive icon to display the login screen.

Restrictions: Password protection only works properly on certain versions of Windows OS or Mac

OS. If password protection is enabled, you will not be able to use the T1 with devices other than PCs,

even if the device supports USB connection, due to system differences. If you plan to use T1 with

devices other than PCs, please disable password protection. You can disable password protection by

navigating to the product's Profile screen from the Home screen.

2 If you did not enable password protection in the activation process, you can start using the

product without additional settings.

Caution: Even if password protection was not enabled, the T1 may not function properly

when connected to a device other than a PC with USB support, depending on specific system

conditions. Please check the USB connection and supported file systems for the device you

wish to use with T1.

Note: If you later choose to use password protection, a separate setting is required, as the activation

process has already been completed. You can enable password protection by using the T1 icon

( ) in the taskbar notification area of the PC where the activation process was performed. On other

PCs, you can enable password protection after downloading “Samsung Portable SSD.exe” from the

Samsung website.

(http://www.samsung.com/ssd) In Mac OS, you can enable password protection after downloading

“Samsung Portable SSD.app”.

❙Configuration

If you wish to change the device name or password, or enable/disable password protection, you can do

so by navigating to the product's Profile screen from the Home screen.

1 Description of key screens

Home screen: This is the screen that displays the status of the connected product.

When you select the product name, the Profile screen will be displayed, enabling you to review and

change the settings for that product.

Samsung T1 Unlocked

Samsung Portable SSD Home

Home screen

The status of the T1 is displayed using one of four status icons, depending on the settings.

Status Description

New

This is the factory setting before activation. You can proceed with activation by

pressing the Add user icon ( ).

Locked

This is when password protection is enabled and the correct password has not been

entered. You can go to the login screen by clicking the Enter Password ( ) icon.

Unlocked

This is when password protection is enabled and the correct password has been

entered. You can go to the Profile screen to change settings by clicking the Settings

() icon.

No Password

This is when password protection is disabled. You can go to the Profile screen to

change settings by clicking the Settings ( ) icon.

Profile screen: The Profile screen shows the details of the connected T1 product. You can change its

name, password and password protection status from this screen. The current password protection

status is shown as below.

Name

Samsung T1

Total Space

238.5 GB

Security

Enabled

Serial number

A2HL - TlAW - 4595 - 75K

Free Space

153.2 GB

Password

Set

Samsung Portable SSD

Home

Name

Samsung T1

Total Space

238.5 GB

Security

Disabled

Serial number

A2HL - TlAW - 4595 - 75K

Free Space

153.2 GB

Home

Samsung Portable SSD

If password protection was enabled during activation If password protection was not enabled during activation

2 How to access the Home screen

In Windows OS Select the icon ( ) in the taskbar notification area, right-click, and then select Open to

access the Home screen.

In Mac OS Click the T1 icon ( ) on the Desktop to access the Home screen.

3 How to access the Profile screen

Select the T1 icon ( ) in the taskbar notification area, right-click, and then select the product under

the Settings menu or select the product from the Home screen to access the Profile screen.

Name

Samsung T1

Total Space

238.5 GB

Security

Enabled

Serial number

A2HL - TlAW - 4595 - 75K

Free Space

153.2 GB

Password

Set

Samsung Portable SSD

Home

Altri manuali per MU-PS1T0B

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Samsung Magazzinaggio

Samsung

Samsung T3 Manuale utente

Samsung

Samsung MagicianDC Manuale utente

Samsung

Samsung SN-324 Manuale utente

Samsung

Samsung HXSU025BA - S1 Mini - Hard Drive Guida utente

Samsung

Samsung RES 3.6 kWh All In One Manuale utente

Samsung

Samsung HD081GJ Manuale utente

Samsung

Samsung Computer Drive Manuale utente

Samsung

Samsung HD080HJ - 80 GB Hard Drive Manuale utente

Samsung

Samsung SpinPoint M8 Manuale utente

Samsung

Samsung HXDU010EB - Story Station 1 TB External Hard... Guida utente

Samsung

Samsung MZ-5PA064 Manuale utente

Samsung

Samsung MU-PA250B Manuale utente

Samsung

Samsung STORY Station HX-DU050DB Manuale utente

Samsung

Samsung Spinpoint M9TU Manuale utente

Samsung

Samsung HXMU050DA - S2 Portable 500 GB External Hard... Manuale utente

Samsung

Samsung G3 Station HX-DU010EC Guida utente

Samsung

Samsung PM871a Manuale utente

Samsung

Samsung HD080HJ - 80 GB Hard Drive Manuale utente

Samsung

Samsung MU-PS1T0B Guida

Samsung

Samsung G3 Station HX-DU015EC Manuale utente

Samsung

Samsung 840 PRO Series Manuale utente

Samsung

Samsung T1 Istruzioni operative

Samsung

Samsung HD103UJ - SpinPoint F1 Desktop Class 1 TB Hard... Manuale utente

Samsung

Samsung Enterprise Capacity 3.5 HDD/Constellation ES Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente