Samsung VC-8828E Manuale utente

Operating Instructions

VACUUM CLEANER

❈Before operating this unit, please read the instructions carefully.

DJ68-00104A 10/18/01 11:53 AM Page 1

1. Do not use to suck up water.

2. Do not immerse in water for cleaning

3. The hose should be checked regularly and must not be used if damaged.

WARNING

1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity sup-

ply is the same as that indicated on the rating plate on the bottom of the cleaner.

2. WARNING: Do not use the vacuum cleaner when rug or floor is wet.

3. Close supervision is necessary when any appliance is used by or near children. Do not allow the vac-

uum cleaner to be used as a toy. Do not allow the vacuum cleaner to run unattended at any time. Use

the vacuum cleaner only for its intended use as described in these instructions.

4. Do not use the vacuum cleaner without a dust bag. Change the dust bag before it is full in order to

maintain the best efficiency.

5. Do not use the vacuum cleaner to pick up matches,live ashes or cigarette butts. Keep the vacuum

cleaner away from stoves and other heat sources. Heat can deform and discolour the plastic parts of

the unit.

6. Avoid picking up hard,sharp objects with the vacuum cleaner as they may damage the cleaner parts.

Do not stand on the hose assembly. Do not put a weight on the hose. Do not block the suction or the

exhaustion part.

7. Switch the vacuum cleaner off at the machine before unplugging from the electrical outlet. Grasp the

plug to disconnect cord from electrical outlet before changing the dust bag.

8. The use of an extension cord is not recommended.

9. If your vacuum cleaner is not operating correctly,switch off the power supply and consult an autho-

rized service agent.

10. Do not attempt to replace a damaged power supply cord. Only the manufacturer or qualified service

personnel can replace power cords. Serious injury may result.

IMPORTANT SAFEGUARDS

Features include indicator and automatic cord rewind.

NOTE : Not all models have the same features.

FEATURES

DJ68-00104A 10/18/01 11:53 AM Page 2

IDENTIFICATIONS OF PARTS

Features marked with

may vary according to model.



REMOTE POWER CONTROL *

(REMOTE CONTROL TYPE ONLY)

CARRYING HANDLE

DUST COVER

TOOL STORAGE COVER

BUTTON FOR SUCTION HOSE REMOVAL

ON/OFF

BUTTON

POWER CONTROL SWITCH *

AUTO BUTTON *

CORD REWIND

BUTTON

FLOOR NOZZLE *

TUBE *

TRANSPARENT TUBE *

SUCTION REGULATOR *

HANDLE *

HOSE *

CLAMPER FOR DUST BAG COMPARTMENT

DJ68-00104A 10/18/01 11:53 AM Page 3

ASSEMBLING THE VACUUM-CLEANER READY FOR USE

Adjust the suction tube(depending on model).

Connect the body connector to the body of the

cleaner.

Connect the nozzle to the suction tube.

EXTENDING :

Holding the narrow part of

the telescopic tube with one

hand, push the handle in the

opposite direction with your

other hand.

➁SHORTENING :

Holding the narrow part of

the telescopic tube with

one hand, pull the handle

towards it using the other hand.

OPTION :

Connect the suction tubes together.

Connect the suction hose to the suction tube.

NOTE :

Adjustable telescopic tube is not

available with all models.

DJ68-00104A 10/18/01 11:53 AM Page 4

You can start or stop your vacuum cleaner by pressing the

on/off switch lightly with your toe.

ON/OFF SWITCH

POWER CONTROL(VARIABLE CONTROL TYPE ONLY)

The vacuuming power can be adjusted to suit any situation with electrical power control.

MIN = For delicate fabrics, e.g. net curtains.

ECO = Economy setting for normally soiled carpets.

MAX = For hard floors and heavily soiled carpets.

1) For slider control types

Slide the controller to upwards or downwards to adjust the power output.

Model with controller on the body of cleaner

2) For button control types

Press (+)button to heighten the power.

Press (

)button to lower the power.

Model with controller on the handle

NOTE :

When removing the power cord from the electrical outlet,grasp the plug,not the cord.

POWER CORD

1) PULLING OUT :

The power cord is long enough to

drawn out for convenience.

2) REWINDING :

When you have finished cleaning,discon-

nect the plug from the electrical outlet

and simply press the cord rewind button

lightly with your toe.

Model with controller on the handle

DJ68-00104A 10/18/01 11:53 AM Page 5

AUTO MODE (BUTTON CONTROL TYPE ONLY)

If you press AUTO MODE, the power is automatically set at

1200~1300 watt.

This mode reduces the suction power fluctuation which is caused by

the fluctuation of airflow quantity to the motor.

For example, when dust bag is full, the quantity of air to the motor will

be decreased and power will be down followingly. AUTO MODE, in

this case, increases the power automatically for sufficient suction.

If you want to go back to the normal control type, just press "+" or "-"

buttons.

Open the tool storage cover upwards.

USING THE ACCESSORIES

CREVICE DUSTING UPHOLSTERY

Crevice tool for radiators, crevices,

corners, between cushions. Dusting brush for furniture,

shelves, books, etc. Upholstery brush for cushions

and drapery.

DJ68-00104A 10/18/01 11:53 AM Page 6

PARK POSITION

TRANSPORTING AND STORING THE VACUUM CLEANER

Located in the top rear side of the vacuum cleaner,there is

a nozzle support that can be used to park the nozzle during

pauses in cleaning

For easy storage and transportation, this vacuum cleaner has a

clip system built into body, which will keep the wand, hose and

nozzle in an upright position.

REPLACING THE DUST BAG

Remove the dust bag from the cleaner

To open the dust cover of the dust bag com-

partment, press the clamper upwards(the clam-

per is located at the front of the dust cover).

Press the dust cover down gently until the

clamper relocks.

After removing the used dust bag, insert the

cardboard bag collar of the new dust bag into

its original position.

DJ68-00104A 10/18/01 11:53 AM Page 7

MAINTENANCE OR REPLACEMENT OF THE FILTERS

INLET FILTER



The secondary filter, located behind the grille in the back of dust bag compartment, protects the motor from

dirt particles.

Do not allow the filter to become clogged.

Suction power reduction or motor damage may result. If filter becomes dirty, pull off the grille and lift out filter.

After cleaning the secondary filter attach it in place.

NOTE :

The filters must be completely dried before being replaced in the dust compartment.

FOR CLOTH FILTER BAG

After using,if the cloth filter bag is full of dust, clean the cloth filter bag and use it again.

NOTE :

Used dust bags can be sealed by removing

the film from the paper and sticking over the

suction opening.

DUST-FULL INDICATOR

If the “Dust-Full” indicator switch changes to “RED” while you are cleaning, the dust bag is

full and must be replaced.

NOTE :

If the “Dust-Full” indicator continues to display “RED” even after changing the dust

bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged.

DJ68-00104A 10/18/01 11:53 AM Page 8

For HEPA Filter Type For Micro Filter Type

OUTLET FILTER



Open the dust cover and lift off the grille.

Grasp filter and pull it out with preliminary filter.

After cleaning preliminary filter, reposition new filter

and preliminary filter by reversing this procedure.

Grasp grille filter and pull it out with preliminary fil-

ter. After cleaning preliminary filter, reposition

new filter compartment and preliminary filter by

reversing this procedure.

HEPA Filter

Preliminary

Filter

Grille Filter

Micro Filter

Preliminary Filter

TRANSPARENT TUBE

Transparent tube prevent the tube and hose

from being clogged by obstacle like as socks

and clothes.

When transparent tube is clogged.

Separate the nozzle from the tube. Remove

the alien substance with a stick from it. After

cleaning it, reassemble the nozzle to the tube.

DJ68-00104A 10/18/01 11:53 AM Page 9

NOTE: For optimum efficiency, clean floor brush with crevice tool.

FOR UNIVERSAL BRUSH

Use the floor nozzle for cleaning all surfaces.

USAGE OF FLOOR NOZZLE

Select the carpet indicator ➀when cleaning carpets.

Select flat surface indicator ➁when cleaning the floors, tiles, etc.

FOR RUG / FLOOR SELECTOR

Before use make sure that the position of the selector is in the right position for the type of surface to be

cleaned.

DJ68-00104A 10/18/01 11:53 AM Page 10

Indice

Altri manuali Samsung Aspirapolvere

Samsung

Samsung VC-8615EN Manuale utente

Samsung

Samsung SC45 Series Manuale utente

Samsung

Samsung SC21F50 Series Manuale utente

Samsung

Samsung VAC-9073R Foglio di istruzioni

Samsung

Samsung POWERbot SR1 M70 Series Manuale utente

Samsung

Samsung Vacuum cleaner Manuale utente

Samsung

Samsung Vacuum cleaner Manuale utente

Samsung

Samsung SW17H90 Series Manuale utente

Samsung

Samsung DJ68-00264B Manuale utente

Samsung

Samsung SC07M25 Series Manuale utente

Samsung

Samsung VC-8614V Manuale utente

Samsung

Samsung VS15A6032R5/EE Manuale utente

Samsung

Samsung SC21K51 Series Manuale utente

Samsung

Samsung VCDC12 Series Manuale utente

Samsung

Samsung POWERbot SR20J90U Series Manuale utente

Samsung

Samsung Vacuum cleaner Manuale utente

Samsung

Samsung SC9150 Manuale utente

Samsung

Samsung Jet 60 Turbo VS15A60 Series Manuale utente

Samsung

Samsung VS28C97 Series Manuale utente

Samsung

Samsung VR20T6001M Series Manuale utente

Samsung

Samsung Jet Bot VR30T85 Series Manuale utente

Samsung

Samsung SR8855 Manuale utente

Samsung

Samsung VAC9013BP Manuale utente

Samsung

Samsung VAC8913EP Manuale utente

Manuali Aspirapolvere popolari di altre marche

Bissell

Bissell LittleGreen Proheat 1425 Series Manuale utente

Panasonic

Panasonic MC-YL637S147-AE Manuale utente

NEFF

NEFF N17XH10 0 Series Manuale utente

LG A9 Series Manuale utente

Oreck

Oreck Cordless Captura BK51700 Series Manuale utente

Kogan

Kogan KAVACROBVWA Manuale utente

Kränzle

Kränzle VENTOS 50 ID Guida utente

EVVO

EVVO Ai35 Manuale utente

DeWalt

DeWalt DWH200D Manuale utente

Pontec

Pontec Pondomatic Vacuum Cleaner Manuale utente

Cleanmaxx

Cleanmaxx PC-P007E Manuale utente

Exido

Exido 240-114 Manuale utente

RIDGID

RIDGID WD1685AU0 Manuale utente

Ezviz

Ezviz RE4P Manuale utente

STG global

STG global TANVAC HDV3000 Manuale utente

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuale utente

Factory

Factory M3340 Manuale utente

Shop-Vac

Shop-Vac VN92 SERIES Manuale utente