Samwontech TEMI 880 Manuale utente
TEMI880
INSTRUCTION MANUAL
Temperature ∙Pressure Programmable Controller
TEMI 880
1
Catalog
1. Notice for Use....................................................................................................................................... 5
1.1. Limited Warranty.......................................................................................................................5
1.2. Warranty Policy......................................................................................................................... 5
1.3. Install Location Require........................................................................................................... 5
1.4. Install Notice.............................................................................................................................. 6
2. Appearance Dimension.......................................................................................................................7
3. Installation..............................................................................................................................................8
3.1. Body Terminal........................................................................................................................... 8
3.2. Applicable Tightening terminal............................................................................................... 8
3.3. I/O Relay Board.........................................................................................................................9
4. Input Keyboard................................................................................................................................... 10
4.1. Digital keyboard...................................................................................................................... 10
4.2. Alphabet keyboard..................................................................................................................11
5. Block Diagram of the Basic Processing......................................................................................... 12
6. Main Screen........................................................................................................................................ 13
7. Operation Screen............................................................................................................................... 14
7.1. Stop Screen............................................................................................................................. 14
7.2. Confirmation Window............................................................................................................. 16
7.3. Run Screen.............................................................................................................................. 17
7.4. Test Status................................................................................................................................18
8. Function Set Screen.......................................................................................................................... 19
8.1. Mode Set.................................................................................................................................. 20
8.2. Fix Set.......................................................................................................................................21
8.2.1. Slope Operation...........................................................................................................22
8.3. Waiting Set...............................................................................................................................23
8.3.1. Wait Function Operation............................................................................................ 24
8.4. Time & Reserve...................................................................................................................... 25
8.4.1. Reserve Method.......................................................................................................... 26
8.5. Normal Set............................................................................................................................... 27
9. Graph Screen......................................................................................................................................28
9.1. Highest and Lowest Display Point....................................................................................... 29
9.2. Curve Select............................................................................................................................ 29
9.3. Time Scale Zooming.............................................................................................................. 30
TEMI 880
2
9.4. File List..................................................................................................................................... 31
9.4.1. Historical File Manage................................................................................................ 32
9.4.2. Table Show...................................................................................................................33
9.4.3. Historical Files’ Order................................................................................................. 34
9.5. Other Set.................................................................................................................................. 35
10. Assistant Screen.............................................................................................................................. 36
11. Program Set Screen........................................................................................................................ 38
11.1. Edit Segment.........................................................................................................................39
11.1.1. Insert Method of Segment....................................................................................... 40
11.1.2. TS Set......................................................................................................................... 41
11.1.3. TS Operation within Segment.................................................................................42
11.2. Loop Set................................................................................................................................. 43
11.2.1. Segment Repeat Explanation................................................................................. 44
11.2.2. Program Repeat Explanation..................................................................................45
11.3. Other Set................................................................................................................................ 46
Caution…………………………………………………….........7, 12, 15, 16, 21, 31, 32, 38, 39, 46
TEMI 880
3
Attention
Thank you for purchasing our controller, this manual explains situation effective
way of using and installing this production.
1. Please keep the manual for the last user who can get easy access for the
manual.
2. Make sure read this manual carefully and fully understand how to operate this
product before operation.
3. This manual is intended to describe the functions and the operate way of this
product.
4. Redistribution & use this manual, with or without modification, are prohibited.
5. The contents of this manual are subjected to change without prior notice.
6. Every effort has been made to ensure accuracy in the preparation of this
manual. However, if any errors are found in this manual. Thank you for your
understanding.
TEMI 880
4
TEMI 880
5
1. Notice for Use
1.1.Limited Warranty
1We make no warranties regarding the product except these mentioned in the
Warranty.
2In cases where the use of this product results in damage or loss to the user or
a third party, we will not be responsible for any incidental or consequential
damage or loss, or any damage or loss suffered by the user or third party
resulting from a defect or defects in this product which could not be foreseen
by us.
1.2.Warranty Policy
1Warranty term is 1year parts and labor. We make warranties regarding the
product only these mentioned in the WARRANTY.
2A/S(After Sales Service) is needed actual expenses, after warranty period.
3This warranty does not cover damage due to loss password, accident fire,
flood and/or other acts of God; misuse, instability, improper installation,
improper or unauthorized repairs, commercial adjustments which are
explained in the instruction manual are not covered under the terms of this
warranty. This warranty automatically will be voided for any unit found with a
missing or altered serial number.
4All warranty repairs must be performed by our authorized service center.
1.3.Install Location Require
1No one may accidentally touch the terminals.
2Mechanical vibrations are minimal.
3Corrosive gas is minimal.
4Temp. can be maintained between 10℃to 50℃and fluctuation is minimal.
5Indoor use only.
6Altitude is up to 2,000m.
7No direct radiant heat or ultraviolet rays is present.
TEMI 880
6
8No magnetic disturbances are caused.
9No wind blows against the terminal board. Also no dust or salt content.
10 No flammable materials are around.
1.4.Install Notice
1There is little influence for electromagnetic fields and noise.
2No moisture can get into the system.
3Ambient temp. and Pressure : 10~50℃, 20~90%RH. (At non-freezing status).
Storage temp. and Pressure : -25~70℃, 5~95%RH. (At non-freezing status).
4If you want to use it after keeping it under 0℃, you need to warm it up for 2
hours at room temperature before plugging it in and warm it up for 30 minutes
after plugging it in. Otherwise, it may not function normally and the product
may be damaged.
5Do not use around any machine, which heat up. Avoid installing it with the
front facing slant.
6Transient over voltage category is categoryⅡ. Applicable rated pollution
degree is pollution degreeⅡ.
7Before starting wiring, be sure to turn off the system or else you will get an
electrical shock.
8Install the guard panel under the controllers for your safety and installation
with easy.
9The I/O relay board must be installed inside of Temp. & Press. Chamber.
10 The I/O relay board must be tied up with 4 pieces of bolt and nut at the 4 holes
on the I/O relay board.
TEMI 880
7
2. Appearance Dimension
TEMI880 Temperature ∙ Pressure Programmable Controller
Figure 2
Appearance and Mounting dimension:
1Appearance dimension: 184×144×107.7(mm) (L×H×W).
2Mounting dimension: 173×133(mm) (L×H).
CAUTION
► Before install & wiring, be sure to turn off the system or else you will get an
electrical shock.
► Do not tighten the mounting screw excessively; the unit case or bracket may
be damaged.
► Make sure ground with Temp. and Press. Chamber case when install power
injection.
TEMI 880
8
3. Installation
3.1.Body Terminal
TEMI880 Body Terminal
Figure 3
3.2.Applicable Tightening terminal
Please use-tightening terminal with insulating sleeve for M3.5 screws as following:
Figure 4
Indice
Altri manuali Samwontech Regolatori di temperatura
