■ KEY ILLUSTRATION
__________________________________________________________________________________
■ TO INSTALL OR REPLACE BATTERY
2 x 1.5V ( AA/AAA) batteries (excluded).
Remove package foil before use;
A. Take out used batteries, with the aid of a
sharp object if needed.
B. Install new batteries by putting one side of
the battery down first and pressing down
the other side.
(Please observe the polarity)
__________________________________________________________________________________
■ CALENDAR AND TIME SETTING
1. Install battery to switch on and enter year setting automatically. Press ▲▼to adjust and
for confirmation in turn.
2. Under time setting mode, press for 3 seconds to enter setting: Set
Year/Date/Time in turn. Press ▲▼ to adjust and SET for confirmation. (Continuous
pressing ▲▼ will speed up the advance of value or the decrease of value.)
3. Press to confirm time and Second starts from “0”.
4. In setting process, return to real time display automatically after idling for 60 seconds.
Remark: The time mode (12/24 hour) depends on sales destination or the requirement
of distributor.
________________________________________________________________________________
■ TO START WEIGHING
1. Weighing mode
A. Place the scale on a solid and flat surface.
B. Under real time display mode, press to convert to weighing mode and
wait until LCD shows “0”.
C. If LCD shows weighing mode, please enter to Step D directly.
If LCD shows volume mode, please press to convert to weighing
mode, and then enter Step D.
D. Load weighing object on scale (or bowl) to start weighing, LCD will show the
weighing reading.
E. Place bowl (if used) on the scale and tare the reading before weighing. (Tare
function described additionally)
2. Volume indication mode
