Sanden Vendo BB01 Manuale del proprietario
PROGRAMMING MANUAL
SandenVendo Italian Branch
Regione Cavallino, 2
15030 Coniolo (AL) – ITALIA
Tel.: +39 0142 335111 – Fax: +39 0142 562348
website: www.sandenvendo.com
Revision: 06
Date: 28/10/2014
Code : 395117
VENDING MACHINE
Mod. 100-101-169-189-217-218-220-254-258
320-611-701-811-Minivendor
BOARD
BB01
Sanden International (Europe) Limited
SandenVendo Italian Branch (SVI)
Regione Cavallino, 2
15030 Coniolo (AL) Italy
Tel.:+ 39 0142 335111
Fax.:+ 39 0142 562348
e-mail: marketin[email protected]
www.sandenvendo.com
SandenVendo German Branch of
Sanden International (Europe) Limited (SVG)
Spangerstrasse 22
40599 Dusseldorf
Germany
Tel.: + 49 211 740390
Fax: + 49 211 7488541
e-mail: info@sandenvendo.de
SandenVendo Spain Sucursal en Espana (SVS)
Poligono Industrial la Almeda
C/. Sant Ferrán, no. 92
E-08940 Cornella (Barcelona) - Spain
Tel. : +34 (0)93 4741555
Fax : +34 (0)93 4741842
e-mail: info@sandenvendo.es
SandenVendo Benelux (SVB)
Avenue A. Van Oss 1 - Boîte 21
1120 Bruxelles - Belgium
Tel.: +32 (0)2 2682595
Fax :+32 (0)2 2682862
e-mail: info@sandenvendo.be
For France:
Jean-François Suteau: Tel: +33 6 67 38 43 26
jfsuteau@sandenvendo.be
Michel Mirczewski: Tel: +33 6 11 01 67 65
mmirczewski@sandenvendo.be
Philippe Mirczewski: Tel: +33 6 89 15 19 52
phmirczewski@sandenvendo.be
Tel. +33 1 73 06 98 54
SAV: 08 92 00 12 49
(1) numér
o payant 0,34 cts la minute
Instructions for programming
BB01 Board functions
1
© SandenVendo
1 GENERAL WARNINGS ...................................................................................................3
1.1 Purpose of this manual ...............................................................................................3
1.2 To whom this manual is addressed.............................................................................3
1.3 Responsibility..............................................................................................................5
1.4 Manufacturer...............................................................................................................5
1.5 Service centers ...........................................................................................................6
1.6 Warranty .....................................................................................................................6
1.7 General safety warnings .............................................................................................7
2 SPECIFICATIONS FOR ELECTRONIC BOARD BB01.................................................10
2.1 Hardware Feature .....................................................................................................10
2.2 Software Feature ......................................................................................................10
3 USAGE OF THE SELECTION SWITCHES IN THE SERVICE MODE...........................13
4 SERVICE ROUTINE .......................................................................................................14
4.1 Error routine..............................................................................................................15
4.1.1 Column Jam Error Routine..................................................................................15
4.1.2 Vend Mechanism error routine............................................................................16
4.1.3 Door Switch error routine ....................................................................................16
4.1.4 Selection Switch error routine .............................................................................16
4.1.5 Changer error routine..........................................................................................16
4.1.6 Chute sensor error routine ..................................................................................17
4.1.7 Bill Validator error routine....................................................................................17
4.2 Coin payout routine...................................................................................................17
4.3 Tube fill routine .........................................................................................................17
4.4 Test vend routine ......................................................................................................18
5 PROTECTED MENUS....................................................................................................18
5.1 Cash counter routine.................................................................................................18
5.2 Sales counter routine ................................................................................................18
5.3 Price setting routine ..................................................................................................18
5.4 Space to sales setting routine...................................................................................19
5.5 Machine configuration setting routine .......................................................................19
5.5.1 C1 Single price / Multi price ................................................................................20
5.5.2 C2 Low change equation ....................................................................................20
5.5.3 C3 Low change level...........................................................................................20
5.5.4 C4 Single / Multi vend .........................................................................................20
5.5.5 C5 Post or pre-payment......................................................................................21
5.5.6 C6 & C7 Accepted Coins ....................................................................................21
5.5.7 C8 & C9 Accepted coins in low change condition ...............................................21
5.5.8 C10 Reset to the factory default value ................................................................22
5.5.9 C11 Accepted Banknotes....................................................................................22
5.5.10 C12 Accepted banknotes in low change condition............................................23
5.6 Money counter routine (if available) ..........................................................................23
5.7 Set configuration.......................................................................................................23
5.7.1 ST1 Identification number of VMC ......................................................................24
5.7.2 ST2 Area identification number of VMC..............................................................24
5.7.3 ST3 Message of VMC.........................................................................................24
5.7.4 ST4 Counter Clearing .........................................................................................24
5.7.5 ST5 Language of VMC .......................................................................................24
5.7.6 ST6 Motor Reset After Door Close .....................................................................25
5.7.7 ST7 Coin Changer Keypad Managing ................................................................25
5.7.8 ST8 Machine Type..............................................................................................25
Instructions for programming
BB01 Board functions
2
© SandenVendo
5.7.9 ST9 MIS Reset....................................................................................................25
5.7.10 ST10 Location code (programmable via windex program)................................25
5.7.11 ST11 Revaluation with Coins to Cashless ........................................................25
5.8 Coin Acceptor Parameter Setting..............................................................................25
5.9 Return to normal mode door open state routine........................................................25
6 ADDITIONAL INFORMATION .......................................................................................26
6.1 Column filled with products but sold out lamp lit .......................................................26
6.2 How to bring vend motors in end position .................................................................26
7 VIDTS FILE GENERATED BY VMC ..............................................................................27
8 SERVICE ROUTINE DIAGRAM.....................................................................................28
Instructions for programming
BB01 Board functions
3
© SandenVendo
1 GENERAL WARNINGS
1.1 Purpose of this manual
The manual contains the correct procedures for
programming of the Vending Machine. This
manual is an integral part of the machine and
must therefore be kept intact and available to
hand for the machine’s entire productive life.
KEEP INSIDE THE MACHINE
1.2 To whom this manual is addressed
This manual is addressed to those persons in
charge of installing, setting, and extraordinary
maintenance of the vendor
(Installer/Maintenance technician). It is
compulsory that all personnel in charge of these
operations are familiar with the instructions and
abide by the procedures contained in this
manual.
Instructions for programming
BB01 Board functions
4
© SandenVendo
Technicians allowed to operate this vending
machine:
Installer/ Maintenance / Specialized
technician
oThe intervention of the maintenance technician is
required for all those operations where the lower
protection carter must be opened: when carter is
removed all operations must be done only by
SandenVendo personnel or by authorized
technicians (trained and informed) and not by
general operators because of electrical and
mechanical risks.
This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have
been given supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children shall
not play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
Instructions for programming
BB01 Board functions
5
© SandenVendo
1.3 Responsibility
The manufacturer’s responsibility is confined to
the correct use of the machine, in the limits
indicated in this manual.
Sanden International (Europe) Limited declines all
responsibility for any damages caused to
persons and/or property as the result of:
-Incorrect installation
-Use of unauthorized spare parts
-Execution of changes unforeseen/unauthorized
by the manufacturer
-Improper use of the machine
-Connection to inadequate supply systems and
non in conformity with the regulations in force
1.4 Manufacturer
Sanden International (Europe) Limited has over
50 years experience in constructing beverage
vending machines, and it is precisely the
technological know-how it has developed over
many years of research working closely with the
production and international marketing, which is
the best guarantee that Sanden International
(Europe) Limited can offer.
Instructions for programming
BB01 Board functions
6
© SandenVendo
1.5 Service centers
Sanden International (Europe) Limited is
represented by a valid and prepared sales
network in both Italy and Europe (see inner cover
page).
1.6 Warranty
The warranty on the Vending Machine
components, starting from the date shown on the
delivery note, is for 24 months for the cooling
system.
The warranty includes exclusively the parts
replaced, with labor excluded.
The Warranty does not include, damages to
the vending machine caused by:
Transport and/or handling
Operator errors
Lack of maintenance as explained in this
manual
Failures and/or breakages not due to
malfunction of the vending machine
Instructions for programming
BB01 Board functions
7
© SandenVendo
1.7 General safety warnings
Carefully read the manual before starting or
loading the vending machine
Protect the vending machine against weather
conditions
Only maintenance technicians should remove
the protective covers
Always read the programming manual before
operating the electronic board settings
Never position the vending machine in direct
sunlight
Never sell the products with the door open
Refer to the routine maintenance chapter to
clean the vending machine
Disconnect the power supply cable before
investigating or unblocking a blocked product
Use a special protection system/Residual
current device or similar.
Install the appliance so that the electrical plug
can be easily accessed afterwards
If the power cable is damaged, it must be
replaced by the manufacturer or by one of its
technical support personnel or by a qualified
electrician.
This machine is not suitable for installation in
areas where water jets are used
Instructions for programming
BB01 Board functions
8
© SandenVendo
This machine is not suitable for outside
installation
To prevent hazards due to machine instability,
secure the machine according to the
instructions
In case of a failure and/or poor operation, only
seek help of the qualified personnel of our
service centers.
Use only spare parts authorized by the
manufacturer
Should this manual be lost or damaged, you
may request a copy from the manufacturer:
please enclose the serial number of your
vending machine with your request.
Indice
Altri manuali Sanden Distributore automatico
Manuali Distributore automatico popolari di altre marche
Godrej
Godrej Minifresh 2000 Manuale utente
LAUREL
LAUREL 300 Istruzioni per l'installazione e il funzionamento
Macas
Macas MACES7C-300-90-00 Series Manuale utente
Dixie Narco
Dixie Narco SIID Manuale operativo
VendNet
VendNet CB500-SA Manuale utente
FAS International
FAS International FASTER TMT Manuale utente
