Sangean LUNCHBOX Manuale utente

LUNCHBOX

Version 1

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings

4. Follow all instructions

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with

the instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves or other apparatus ( including amplifiers )

that produce heat.

9. Do not defect the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one

wider than the other. Agrounding type plug has two blades and

a third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete

outlet – USA version only.

10. Protect the power cord from being walked on or pinched

particularly at plug, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

15. To reduce the risk of fire or electric shock, Do not expose this

appliance to Rain or Moisture.

16. The Shock Hazard Marking andAssociatedGraphical Symbol

is provided on the bottom panel of unit.

17.Apparatus shall not be exposed to dripping or splashing and no

objects filled with liquids, shall be placed on the apparatus.

18. For outdoors use, to avoid electric shock, use battery only

during a raining day or the weather is wet.

Controls

Volume Control

Tuning Control

FM antenna

LCD display

Power On/Off

Band Selection

Preset Station

Speaker

Battery Compartment

AC power cord storage

LCD Display

Band Indicator

Frequency

Preset Stations

Low Battery Indicator

Power the radio

1. Battery operation

Installing the batteries, first turn battery cover fixture anti-clockwise

to loosen and pull down the battery cover. Insert 4 x C size (UM-2)

battery into the compartment. Ensure the battery is inserted in

accordance with the diagram shown.

Close the battery cover and fasten the fixture by turning clockwise.

If the radio is not to be used for any extended period of time, it is

recommended that the battery is removed from the radio.

2. AC operation

Before you plug theAC power cord into the AC socket, be sure

the voltage is correct. If you have batteries in the radio and use the

AC power cord, the batteries will automatically be disconnected.

AC power storage is designed to store the cord when the radio is

not in use.

3. Operating the radio

This radio is equipped with two tuning methods – Manual tuning and

Memory presets recall.

Manual Tuning

1. Press the Power button to turn on the radio.

2. Select the required waveband by pressing the Band button.

3. Be sure to screw in the rubber FM antenna properly to get

best reception. For AM ( MW ) band, rotate the radio to get

best signal.

4. Rotate the Tuning Control knob will change the frequency in the

following increments

FM: 50 or 100 kHz

MW ( AM ): 9 or 10 kHz

5. Rotate the Volume Control knob to get required sound level.

6. To turn off the radio, press the Power button. Display will

show OFF.

Memory presets recall

Storing stations in preset memories

There are 5 memory presets for each waveband.

1. Press the Power button to turn on the radio.

2. Tune to the required station using Tuning Control.

3. Press and hold down the required preset until the radio beeps.

The preset number will appear in the display and the station will

be stored under chosen preset button.

4. Repeat this procedure for the remaining presets.

5. Stations stored in preset memories can be overwritten by

following above procedures.

Recalling stations from preset memories

1. Press the Power button to turn on the radio.

2. Select the required waveband.

3. Momentarily press the required Preset button, the preset

number and station frequency will appear in the display.

Display backlight

When radio is switched on, press any button except Power button

will illuminate the LCDdisplay for approx. 15 seconds.

Setting tuning step

Tuning steps on some countries are different from where you

purchase the radio. If you buy the radio in Europe and intend to

use inNorthernAmerica or some LatinAmerican countries,

you may have to adjust tuning step so the radio may continue to

serve you well.

While radio is switched off, long press the Band button for approx.

7 seconds until display flashes current FM tuning step 50 ( kHz ).

Rotate the Tuning Control, you may adjust to 100 ( kHz ).

Press Band button again to confirm the setting.

After FM tuning step is reset, pressing Band button again,

display will show AM and flash 9 ( kHz ). Rotate the Tuning Control,

you may adjust to 10 ( kHz ). Press Band button again to confirm

the setting.

Clear the preset stations

Whenever is necessary, you can clear all the preset stations.

When radio is off, press Preset button 1 and Band at the same time

for more than 2 seconds to clear all the preset stations. Radio will

be reset to original factory set status.

Specifications

Frequency Coverage:

FM 87.50 – 108 MHz

AM ( MW ) 520 – 1710 kHz ( 10 kHz )

522 – 1629 kHz ( 9 kHz )

AC Power:

AC 120V/60Hz/10W (USA )

AC 230V/50Hz/10W (Europe )

Batteries: 4 x UM-2 ( C Size )

Output Power:

2 Watt 10% T.H.D. @ 100 Hz @ DC battery 6V

5 Watt 10% T.H.D. @ 100 Hz @ AC 230V or 110V

Altri manuali per LUNCHBOX

Indice

Altri manuali Sangean Radio portatile

Sangean

Sangean U-3 Manuale utente

Sangean

Sangean DT-220 Manuale utente

Sangean

Sangean DPR-17 Manuale utente

Sangean

Sangean H201 Manuale utente

Sangean

Sangean DT-200X Manuale utente

Sangean

Sangean SG-110 Manuale utente

Sangean

Sangean DT-210 Manuale utente

Sangean

Sangean PR-D12 Manuale utente

Sangean

Sangean VOCAL 170 PR-D17 Manuale utente

Sangean

Sangean PR-D4W Manuale utente

Sangean

Sangean DPR-32 Manuale utente

Sangean

Sangean DT-220V Manuale utente

Sangean

Sangean ATS-404 Manuale utente

Sangean

Sangean U-1 Manuale utente

Sangean

Sangean DT-120 Manuale del proprietario

Sangean

Sangean ATS-606A Manuale utente

Sangean

Sangean Sangean- RCR-3 Manuale utente

Sangean

Sangean PR-D17 Manuale utente

Sangean

Sangean PR-D7 Manuale utente

Sangean

Sangean ATS-606AP Manuale utente

Sangean

Sangean WR-1 Manuale utente

Sangean

Sangean ProTravel PT10 Guida utente

Sangean

Sangean ATS-505P Manuale utente

Sangean

Sangean ATS-606 Manuale utente

Manuali Radio portatile popolari di altre marche

Telefunken

Telefunken P5 Manuale utente

Tait

Tait TP9300 Manuale utente

Lafayette

Lafayette Guardian 5500 Manuale utente

Sailor

Sailor SP3300 Manuale utente

Matra Nortel

Matra Nortel MC 6500 Manuale utente

Hytera

Hytera PD362i Manuale utente

Vertex Standard

Vertex Standard VX-P920 Series Manuale utente

Roberts

Roberts Ecologic 3 Manuale utente

LENCO

LENCO IPD-5100 Manuale utente

Baofeng

Baofeng BF-82 Manuale utente

Philips

Philips AE2110/04 Manuale utente

Trevi

Trevi RA 764 Manuale utente

TerraTec

TerraTec NOXONiRadio Manuale operativo e di manutenzione

M/A-Com

M/A-Com P5100 Series Manuale utente

Elta

Elta 6699 Manuale utente

PURE

PURE ONE classic Series II Manuale utente

Teac

Teac PR130 Manuale utente

Philips

Philips AE6370 Manuale utente