Sangoma IMG 1010 Guida

IMG 1010 - Rack Mounting

The IMG 1010 is shipped with the tray and docking station mated together for easy mounting. When mounting the chassis, follow these

guidelines:

Do not obstruct air flow to the front or the side vent holes towards the rear of the unit.

Allow approximately 76 cm (2.5 ft.) to slide the field-replaceable tray out.

19" Front and Mid mount Bracket Positioning

The IMG 1010 ships with brackets for a 19" inch rack. They are installed in the front mount position as shown below.

Front Mount (factory default)

The brackets can be rotated as shown below. By rotating and repositioning the brackets, the IMG can be used in a mid-mount installation. The

two mid-mounting options are displayed in diagrams below.

Mounting Ears on bracket facing rear:

Mounting Ears on bracket facing forward:

19" Rear Mount Bracket Kit (SLM-BRK-1000)

For extra support, a rear mount bracket assembly is also available. This bracket assembly is needed to make the system NEBS Level 3

Compliant. If only the front or mid mount brackets are used when installing an IMG in a rack system, the IMG 1010 will not be NEBS Level 3

Compliant. The rear mount brackets are attached to the IMG 1010 by inserting a 6-32" screw located towards the rear of the IMG into the

mounting hole of each bracket (one on either side of IMG 1010). Contact your sales representative to order the bracket.

23" Front and Rear Mount Bracket Kit (SLM-BRK-1001)

The bracket assembly for use with a 23" rack includes front and rear mounting options for added stability. When installing IMG into a 23" rack, the

front and rear brackets are required. As explained above, for the IMG 1010 to be NEBS Level 3 compliant in a 23" rack, both the front and rear

bracket assemblies must be used. See diagram Below

Installation

Remove existing 19" brackets from front mounting position.

Replace with 23" brackets, re-using existing screws.

Attach Rear Bracket Mounts to chassis as shown in figure.

Attach 23" brackets to the Bracket Mounts using screws provided.

Indice

Altri manuali Sangoma Portale

Sangoma

Sangoma Netborder SS7 Manuale utente

Sangoma

Sangoma Vega 60G Manuale utente

Sangoma

Sangoma Vega 100G Manuale

Sangoma

Sangoma Vega 100G Manuale utente

Sangoma

Sangoma Vega 100G Manuale utente

Sangoma

Sangoma IMG 2020 Manuale utente

Sangoma

Sangoma Vega 60G Manuale utente

Sangoma

Sangoma VEGA400G Istruzioni operative e di manutenzione

Sangoma

Sangoma Vega 3050G Manuale utente

Sangoma

Sangoma Netborder SS7 Manuale utente

Sangoma

Sangoma Vega 4x4 Manuale utente

Sangoma

Sangoma Vega 5000 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente