Sanus SLT3 Manuale utente

SLT

INSTRUCTION MANUAL

We’ll Make It Stress-Free

If you have any questions along the way, just give us a call.

1-888-333-1376 We’re ready to help!

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

—

Perfect!

Yes

—

This mount is NOT compatible. Visit Simplicity.Sanus.com or call

1-888-333-1376 to ﬁnd a compatible mount.

—

Perfect!

Yes

—

This mount is NOT compatible. Visit Simplicity.Sanus.com or call

1-888-333-1376 to ﬁnd a compatible mount.

Before getting started, let’s make sure this mount is perfect for you!

2What is your

wall made of? Drywall

with steel

studs?

Unsure?

Drywall

with wood

studs?

Solid concrete

or concrete

block?

150 lb

(68.0 kg)

110 lb

(49.8 kg)

Call Customer Service: 1-888-333-1376

Perfect! Perfect! Steel Stud Kit #SSMK1

required (not included)

For walls with

wood studs, solid

concrete, and

concrete block walls:

For walls with

steel studs:

CAUTION:

DO NOT

install into

drywall alone

Para Español ver página 24

Does your TV

(including accessories)

weigh MORE than?

Please read through these instructions completely to be sure you’re comfortable with this easy install process.

Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use

of this product, contact Customer Service at 1-888-333-1376 .

Do you have

all the tools

needed?

CAUTION: Avoid potential personal injuries and property damage!

●This product includes directions and hardware for use with wood stud, solid concrete and concrete block walls –

DO NOT install into drywall alone. For information on how to use this product with steel stud walls contact Customer

Service and ask about the steel stud mounting kit

●The wall must be capable of supporting ﬁve times the weight of the TV and mount combined

●Do not use this product for any purpose not explicitly speciﬁed by manufacturer

●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Ready to

begin?

Awl

Pencil Level

Stud Finder

ScrewdriverTape Measure

7/32 in.

(5.5 mm)

Wood

Drill Bit

Electric Drill

Hammer

1/2 in.

(13 mm)

Socket Wrench

Drill Bit

3/8 in.

(10 mm)

Concrete

1/2 in.

(13 mm)

Steel Stud

Drill Bit

Wood Stud Install

Concrete Install

Steel Stud Install

Dimensions in. [mm]

7.87

200.0

23.62

600.0

16.93

430.0

0.34

8.8

0.33

8.4

7.10

180.4

27.00

685.9

2.87

72.9

22.86

580.7

24.00

609.6

16.00

406.4

18.11

460.0

4.91

124.8

7.73

196.2

1.00

25.4

TOTAL

HEIGHT

ADJUST

2.36

59.9

5.8

147

12°

5°

3.94

100.0

KNOBS ONLY TO FACE EACH OTHER IF THE TV MOUNTING PATTERN

IS 100mm x 100mm

KNOBS

TV INTERFACE

WALL PLATE

FULLY ASSEMBLED MOUNT

FEATURES

100x100 VESA PATTERN

SIDE VIEW - DEPTH

3-D

M4 M6 / M8

2.5mm

22mm

M8 x 50mm

M6 x 20mmM6 x 12mm

M8 x 16mm M8 x 25mm

M8 x 20mm

M4 x 12mm

M6 x 35mm

M8 x 35mm

M4 x 35mm

M8 x 45mm

Parts and Hardware for STEP 1

NOTE: Not all hardware included will be used.

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to

your dealer; contact Customer Service. Never use damaged parts!

Supplied Parts and Hardware

03 x4

06 x4

04 x4 07 x4

05 x4 08 x4

01 x1 02 x1

TV Brackets

TV Screws

09 x4

10 x4

11 x4

12 x4

13 x4

14 x4 15 x4

16 x4

17 x4

Washers

Spacers

pacer

5/16 x 2¾ in.

5/16 in.

Fischer UX10 x 60R

Parts and Hardware for STEP 2

20 x4

Concrete Anchors

For concrete installations ONLY

CAUTION: Do not use in drywall or wood

Fischer UX10 x 60R

22 x4

Wall Plate Template

Wall Plate

18 x1

19 x1

Lag Bolts

Lag Bolt Washer

21 x4

Hardware for STEP 2C (not included)

Steel Stud Anchor Kit #SSMK1 (not included)

Contact Customer Service at 1-888-333-1376 to inquire

about the additional hardware.

M5 x 25mm

Hardware for STEP 3

1/4-20 x 1¾ in.

1/4 in.

1/4-20 SnapToggle BB

S1 x4

S2 x4 S3 x4

23 x1

24 x2

Hex Key

Securement Screw

STEP 1 Attach Brackets to TV

FLAT BACK ROUND BACK CABLESINSET HOLES

16 17

M6 M8M4

1.1 Select TV

Screw Diameter

1.2 Select TV

Screw Length

Hand thread screws into the threaded

inserts on the back of your TV to

determine which screw diameter

(M4, M6, or M8) to use.

a:If your TV has a flat

back AND you want your

TV closer to the wall,

use the shorter screws.

(spacers not necessary).

b:Spacers and longer screws are

supplied to accommodate:

●Round (irregular) back TVs

●TVs with inset mounting holes

●Extra space needed for cables

Too Short

Too Long

CAUTION:

Verify adequate thread

engagement with the screw/

washer/spacer combination

AND TV Bracket (STEP 1.3).

-Too short will not hold the TV.

-Too long will damage the TV.

Correct

If your TV included

inset spacers or wall mount

adapters, see Troubleshooting

on PAGE 23.

aShort screw and washer

aFlat-back TVs

bRounded-back TVs or extra space needed

1.3 Attach Brackets to TV

Center the TV brackets 01 and 02 over your TV hole pattern as shown - making sure the brackets are level.

IMPORTANT:The tilt tension knob Ton TV brackets 01 and 02 should normally be oriented to the outside edges, EXCEPT for TVs

with 100 mm (4 in. wide) mounting hole spacing - these TVs require switching the TV brackets 01 and 02 .

Install using the spacer, TV screw and washer combination you selected for your TV.

CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough to

secure the TV bracket to the TV. DO NOT overtighten the screws.

16 15

14 15

02 01

TOP OF TV

ONLY for 100mm (4 in.)

TV mounting hole spacing,

switch the TV brackets 01

and 02 on your TV.

100mm (4 in.)

CAUTION: Avoid potential personal injuries and property damage!

●Drywall covering the wall must not exceed 16 mm (5/8 in.)

●Minimum wood stud size: nominal 51 x 102 mm (2 x 4 in.) actual 38 x 89 mm (1 ½x 3 ½in.)

●Minimum horizontal space between fasteners: 406 mm (16 in.)

1. Locate studs. Verify the center of the stud(s) using an awl, a thin nail, or an edge to edge stud finder.

2. Level the wall plate template 18 and mark the hole locations in the center of the studs.

NOTE: TV with brackets can be shifted to the left or right from center. Consider this when selecting the location of your wall mount.

≤16 mm

(5/8 in.)

406-610 mm

(16-24 in.)

STEP 2A Attach Wall Plate Wood Stud Installation

NOTE: For assistance in

determining wall plate location, try our

HeightFinder™at SANUS.com/2665

Indice

Altri manuali Sanus Rack e supporto

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente