Sanus SAN25BB Manuale utente

Milestone AV Technologies

6436 City West Parkway

Eden Prairie, MN 55344 USA

Customer Service

Americas: 800-359-5520 • 651-484-7988 • [email protected]om

Europe, Middle East, and Africa: +31 (0) 495 580 852 • europe.sanus@milestone.com

Asia Paciﬁc: 86 755 8996 9226 • sanus.ap@milestone.com

accents.sanus.com

All other brand names or marks are used for identiﬁcation purposes and are trademarks of their respective owners.

SAN25BB Instruction Manual

(6904-002022 <01>)

Scan here to view

product demo and install

videos or visit san.us/109

6904-002022 <01>

ඔ᝟෫ୗᆒ୙ᚓኞไᡈ⪅ἥ㟢孠

ᮘᐦ࿴▱孮孮孮凞ᮏ ໟྵⓗ ࿴ಙᜥᅾᮍ⚦⚦ ⚦⚦ ⚦

ᮏ ᡤໟྵⓗಙᜥ࿴ ᆒ⣔

⚦⚦ ⚦⚦

10°

5°

1.90

48.4

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

Specications

ÙWeight capacity-DO NOT EXCEED: 36.2 kg (80lb) includes TV and any accessories

ÙTilt: +5° -10°

CAUTION: Avoid potential personal injuries and property damage!

ÙDo not use thisproduct for any purpose not explicitly specied by manufacturer.

ÙThewall must becapableof supporting vetimes theweight of themonitor and mount combined.

ÙThisproduct isnot designed for use in metal stud walls!

ÙIf you do not understand these instructions, or havedoubtsabout thesafety of theinstallation, assembly or use of this

product, contact Customer Serviceor call a qualied contractor.

ÙManufacturer isnot responsiblefor damageor injury caused by incorrect assembly or use.

Technical Specications

in.

Required Tools

10mm

(3/8 in.)

5.5mm

(7/32 in.)

13mm

(1/2 in.)

ඔ ᝟෫ୗᆒ୙ᚓኞไᡈ⪅ἥ㟢孠

ᮘᐦ࿴▱孮孮孮凞ᮏໟྵⓗ ࿴ಙᜥᅾᮍ⚦⚦ ⚦⚦ ⚦

ᮏ ᡤໟྵⓗಙᜥ࿴ ᆒ⣔⚦⚦ ⚦⚦

UP TO 15.75

400.0

16.93

430.0 405.0

15.94

152.4

6.00

95.3

3.75

120.7

4.75

15.50

393.7

6904-002022 <01> 3

⁄ x 2¾ in. ⁄ in.

WARNING: This product contains small items that could be a choking hazard if swallowed.

Beforestarting assembly, verify all partsareincluded and undamaged.If any partsaremissing or damaged, do not return the

damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE: M4, M6, or M8 describes thediameter, mm describes thelength of screwsthat arelabeled M# X ##mm.Not all

hardwareincluded will beused.

[01] x 1

[02] x 1[03] x 1

[04] x 3[05] x 3[06] x 3

[07] x 4[08] x 4[09] x 4[10] x 4[11] x 4

[12] x 4[13] x 4[14] x 4[15] x 4[16] x 4

Supplied Parts and Hardware

M6 x 12mm M6 x 20mm M6 x 35mm

M4 x 35mm

M4 x 12mm

M4 M6/M8

M8 x 16mm M8 x 35mm

6904-002022 <01>

M4/M6/M8

1-2 Attach brackets to a TV with a at back

[07, 09, 10, 12]

[02, 03]

[14, 15]

Ensurethebracketsarelevel on theback of theTV.

If you requireadditional spacefor cables, recesses, or

protrusions, choose conguration B.

[03]

[02]

Your TV type will helpyou determinewhich hardware

conguration to use.

A. Installation option without spacers(TVswith at backs)

B. Installation option using spacers(TVswith irregular

backs)

Hand thread screwsinto thethreaded insertson theback of

your TV to determinethecorrect screw diameter (M4, M6, or

M8).

CAUTION: Avoid potential personal injuries and

property damage! Verify that thereareadequatethreads

to securethebracketsto themonitor.If you encounter

resistance, stopimmediately and contact customer

service. Use theshortest screw and spacer combination to

accommodateyour needs. Using hardwarethat istoo long

may damageyour TV.

1-1 Select the hardware diameter and length

1 Select TV Hardware and Mount TV Brackets

6904-002022 <01> 5

M4/M6/M8

1-2 Attach brackets to a TV with an irregular back

1-3 Adjust straps

[08, 11, 13]

[02, 03]

[14, 15]

Ensurethebracket islevel on theback of theTV.

Standard congurationsareshown.

For special applications, or if you areuncertain about your

hardwareselection, contact Customer Service.

[03]

[03] [16]

[02]

For ease of access, straps should belevel with thebottom of theTV.

6904-002022 <01>

[01]

< 16 mm

(5/8 in.)

2Mount the Wall Plate

Wood stud

2-1 Locate stud

2-2 Mark the wall

Level thewall plate[01] and mark theholelocations.

2-3 Drill pilot holes

2-4 Tighten lag bolts [04]

CAUTION:

Avoid potential injuries or property damage!

Improperuse could reducetheholding powerof thelag bolt.To

avoid potential injuries or property damage

ÙDO NOT over-tighten thelag bolts[04].

ÙTighten thelag bolts[04] only until thewashers[06] are

pulled rmly against thewall plate[01].

[04]

[06]

Verify thecenter of thestud using an awl, a thin nail, or an

edgeto edgestud nder.

CAUTION: Avoid potential personal injuries and property

damage!

ÙAny material covering thewall must not exceed 16 mm

(5/8 in.).

ÙMinimum wood stud size: common 51 x 102 mm (2x 4 in.)

(nominal 38 x 89 mm (1½ x 3½ in.)).

CAUTION:

Avoid potential injuries or property damage! Pilot

holes MUST bedrilled to a depth of 75 mm (3 in.), using a 5.5 mm (⁄

in.) diameter drill bit.

75 mm

(3 in.)

5.5 mm

(7/32 in.)

13 mm

(1/2 in.)

6904-002022 <01> 7

2-1 Level wall plate [01] and mark hole locations

2Mount the Wall Plate

Solid Concrete and Concrete Block

2-2 Drill pilot holes as illustrated

2-3 Insert anchors [05]

2-4 Tighten lag bolts [04]

CAUTION: Avoid potential personal injuries and property

damage!

ÙMount thewall plate[01] directly onto theconcretesurface.

ÙMinimum solid concretethickness: 203 mm (8 in.).

ÙMinimum concreteblock size: 203 x 203 x 406 mm (8 x 8 x 16 in.).

ÙMinimum spacebetween toptwo fasteners: 120.7 mm (4¾ in.).

CAUTION: To avoid potential injuries or property damage:

ÙPilot holes MUST bedrilledto adepth of 75 mm (3 in.)using a

10mm (3/8 in.)diameterdrill bit.

ÙNeverdrill into themortar betweenblocks.

CAUTION: To avoid potential injuries or property damage:

Besuretheanchors[05] areseated ush with theconcretesurface.

[01]

[05]

[01]

[04] [06]

Tighten lag bolts[04] only until thewashers[06] arepulled rmly

against thewall plate[01].

CAUTION: Improper use could reducetheholding power of

thelag bolt.To avoid potential injuries or property damage: DO NOT

over-tighten thelag bolts[04].

75 mm

(3 in.)

10 mm

(3/8 in.)

13 mm

(1/2in.)

6904-002022 <01>

[02, 03]

[01]

3Hang the TV onto the Wall Plate

1 2

HEAVY! You will need

assistance with this step.

Thereisan audibleclick when thebrackets

[02, 03] aresecurely latched to thewall

plate[01].

6904-002022 <01> 9

4Adjust Tilt and Level

10°

5°

Loosen theknobson theTV brackets

[02, 03] to adjust thetilt of your TV.

Tighten theknobswhen your TV isset

to thedesired tilt.

If needed, tighten a screw on theTV brackets[02, 03] to level theTV.

[02, 03]

[03]

[02]

6904-002022 <01>

MilestoneAV Technologies and itsaliated corporationsand subsidiaries (collectively, “Milestone”), intend to makethismanual accurateand complete. However, Milestonemakes no claim that theinformation

contained herein coversall details, conditions, or variations. Nor does it providefor every possiblecontingency in connection with theinstallation or use of thisproduct.Theinformation contained in this

document issubject to changewithout noticeor obligation of any kind.Milestonemakes no representation of warranty, expressed or implied, regarding theinformation contained herein.Milestoneassumes no