Saramonic SPMIC510 UC Manuale utente
Compact Stereo Microphone
for Android Devices with a
USB Type-C Connector
User Manual
SPMIC510 UC
Thank you for choosing Saramonic!
Saramonic SPMIC510 UC is a compact stereo
condenser microphone designed for smartphones,
tablets and computers with a USB Type-C connector.
The microphone is equiped with two condenser
microphone elements positioned in an X/Y
configuration. It provides superb stereo sound that
is ideal for vlogging, live streaming, interviews, ENG
and mobile video production.
Highlights
• Plug-and-play
• Dual Condenser Elements in X/Y Pattern
• Compact and lightweight design. Ideal when using
with smartphone accessories, like gimbals
• For smartphones, tablets and computers with a USB
Type-C connector
USB Type-C connector
LED power indicator
Microphone capsules
Setup Guide
1. Plug the microphone directly into the USB Type-C
connector of your device
2. For optimum signal, please make sure the arrow mark
on the microphone is pointed at the sound source.
3. Download a recording APP, like Cinema FV-5. Open the
APP and Camera, the microphone LED indicator will
turn blue, then you are ready to record.
Note:
1. To avoid any noise, please turn down the volume
of your recording device and unplug the 3.5mm jack
headphone (when using a Pad or PC).
2. Please make sure the OTG of your phone is on. If not,
the microphone may not work.
3. For Samsung, Huawei, OPPO phones, the
SPMIC510UC can not work without the APP
Common Technical Issues and Solutions
• If you have any problems when using SPMIC510 UC,
please refer to below list:
Issue Reason Solution
Mic is not recognized by
recording device Mic is not well connected Unplug and reconnect
Mic is not picking up
sound
1. Mic is not well
connected
2. No recording APP
Plug out and try again,
it works only after the
blue indicator is on.
Please make sure the
recording APP is on.
No sound when you
plug out and replug the
mic during recording
You may use a
3.5mm headphone
simultaneously
Plug out both the
headphone and mic,
and try again.
Sound is distorted
The input level of your
device is too high
Lower the input level
before recording
You are monitoring with
a mono headphone
Choose a stereo
headphone
The mic is picking up too
much ambient sound,
not the subject
1. Recording distance is
too far from subject
2. The mic's capsule are
pointing in the wrong
direction
1. Get closer to the
subject.
2. Make sure the arrow
mark on the mic points
at the sound source
• If you have further questions, please consult your dealer
Specifications
Transducer Type Condenser
Polar Pattern Cardioid (X/Y Pattern)
Audio 48 kHz / 16-bit
Frequency response 45 - 20,000 Hz
Signal to noise ratio 78dB
Output USB Type-C Connector
Power Powered by the connected device
Operating temperature -10°C - 55 °C
Dimension (L x W x H) 70 x 18.4 x 26.88mm
Weight 15.5g (0.55oz.)
www.saramonic.com
Saramonic is a trademark registered and owned by Shenzhen DSQN Investment CO., LTD.
COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN )
Room 2009, Shenzhou Bairuida Bldg, Banxuegang Road, Bantian Street, Longgang District,
Made in China
Indice
Altri manuali Saramonic Microfono
Saramonic
Saramonic SPMIC510 Di Manuale utente
Saramonic
Saramonic Vmic Manuale utente
Saramonic
Saramonic SR-MV7000 Manuale utente
Saramonic
Saramonic SR-MV2000W Manuale utente
Saramonic
Saramonic Vmic Manuale utente
Saramonic
Saramonic Blink500 ProX RX Manuale utente
Saramonic
Saramonic BTW Manuale utente
Saramonic
Saramonic SR-TM7 Manuale utente
Saramonic
Saramonic Vmic Manuale utente
Saramonic
Saramonic SR-M500 Manuale utente
