Sartorius QC7CCE-S Manuale utente

Sartorius QC - Scales

Service Manual

QC7CCE-S, -S0UR

QC34EDE-S, -S0UR

QC64EDE-S, -S0UR

DIN EN ISO 9001

Sartorius AG, Weighing Technology

WQC5001-e95121

SARTORIUS QC - Scales

Page

General Information 4

Brief Operating Instructions 4

Key Functions 4

Scale Operating Menu 5

Accessing the Scale Operating Menu and Changing Settings 5

Overview of the Scale Operating Menu 6

Activating the BPI Mode 11

Adjusting the QC Scales 11

Table of Adjustment Data 11

Adjustment Sequence 12

Overload Stops 12

1. QC7CCE... 12

2. QC34EDE..., QC64EDE... 14

Zero-Point Offset Value 15

Adjusting the Linearity 16

Adjusting the Span (Senitivity) 17

Replacing the Main PCB 17

Replacing the Strain Gauge System 18

1. QC7CCE... 18

2. QC34EDE..., QC64EDE... 20

Error Codes 22

Installation of the YDI01IS-0CE (Industry Printer) 23

Spare Parts 23

General Information

QC scales come in different model series, each with different housing

versions.

The QC7CCE... series comes in the “QS-Mini” housing version and the

QC34EDE... and QC64EDE... series in the “QS-Maxi” version.

The strain gauge Systems are different in these models.

The electronics are the same in all of these models (MC1), i.e., the operating

instructions, scale operating menu and error codes are the same for each

model.

The -S0UR versions are equipped with a different keyboard foil compared to

the standard versions (for american users).

Brief Operating Instructions

Key Functions

-S -S0UR

ID key, for generating ID codes with data output

Memory key, call and save

Save data in tare 2 memory

“Start” checkweighing

Output totalization result

Add to totalization memory

On/off key

CF (Clear Function); cancel a function or delete data from

memory. First press CF key, then press the key

corresponding to the function or memory to be deleted.

Info key

Tare/zero key

Toggle between weighing and counting applications, or

between ref. weight and reference piece count

Call counting application

Print key

SARTORIUS QC - Scales

Scale Operating Menu

Accessing the Scale Operating Menu and Changing Settings

Press eto switch the scale off and back on again.

While all segments are displayed (segment check), briefly press the =key.

A “1” is displayed.

Note:

If you wish to change the settings in the scale operating menu, the menu

access switch must be open. The menu access switch is not accessible

when the scale housing is closed; it is located on the solder side of the main

PCB. To access this switch, you need to open the display unit. The factory

setting of the menu access switch is “accessible” (open).

Selecting a Code:

Press uto change the number, in series (1, 2, 3 ... 9, 1).

Press p to move from the 1st to the 2nd, 2nd to 3rd and, if desired, back

to the 1st position of the 3-part menu code.

Changing a Code:

Press =to confirm the desired setting; the “°” symbol is displayed next to

the code when it is set.

Exiting the Menu with or without Saving a New Setting:

To exit the scale operating menu, first move the cursor to the first position of

the code.

If you wish to save the changes you have made, press the =key for at

least 1.5 seconds to exit the menu.

If you do not wish to save any changes, press the e key to exit the menu.

Overview of the Scale Operating Menu

1Weighing Mode

1 1 Ambient Conditions

1 1 1 Very stable

1 1 2 Stable

1 1 3 Unstable

1 1 4 Very Unstable

1 2 Weighing / Filling

1 2 1 Standard weighing

1 2 2 Filling

1 3 Stability Range

1 3 1 1/4 digit

1 3 2 1/2 digit

1 3 3 1 digit

1 3 4 2 digits

1 3 5 4 digits

1 3 6 8 digits

1 4 Stability Symbol Delay

1 4 1 None

1 4 2 Short

1 4 3 Long

1 4 4 Extremely long

1 5 Tare Parameter

1 5 1 At any time

1 5 2 After stability

1 6 Auto Zero

1 6 1 On

1 6 2 Off

1 7 Weight Units

1 7 1 User - definable o

1 7 2 Gramsm g

1 7 3 Kilograms Kg

1 7 4 Carats ct

1 7 5 Pounds lb

1 7 6 Ounces oz

1 7 7 Troy ounzes ozt

1 7 8 Hong Kong taels tl

1 7 9 Singapore taels tl

1 7 10 Taiwanese taels tl

1 7 11 Grains gr

1 7 12 Pennyweights dwt

1 7 14 Parts per Pound o

1 7 15 Chinese taels tl

1 7 16 Mommes m

1 7 17 Carats k

1 7 18 Tola t

1 7 19 Bath b

1 7 20 Mesghal m

SARTORIUS QC - Scales

1 8 Display Mode

1 8 1 Highest possible accuracy

1 8 2 Last numeral blanced when load changes

1 8 3 Rounding factor 1

1 8 4 Rounding factor 5

1 8 5 Rounding factor 10

1 8 6 1 % accuracy

1 8 7 0.1 % accuracy

1 8 8 0.2 % accuracy

1 8 9 0.1 % accuracy

1 8 10 0.05 % accuracy

1 8 11 0.02 % accuracy

1 8 12 0.01 % accuracy

1 8 13 PolyRange function

1 9 Adjustment Functions

1 9 1 External adjustment

1 9 5 External linearization

1 9 7 Adjustment function locket

2APPLIKATION PROGRAMS

2 1 Counting

2 1 1 blocked

2 1 4 free

2 2 Tare Memory

2 2 1 blocked

2 2 2 Tare input memory

2 2 3 Tare input memory automatically

2 4 Clearing Function CF-Key

2 4 1 clearing all stored values

2 4 3 selektive clearing

2 5 Number Keys

2 5 1 blocked

2 5 2 free

2 6 Checkweighing

2 6 1 blocked

2 6 2 Net checkweighing

2 6 3 Diff. checkweighing

2 7 Totalling

2 7 1 blocked

2 7 2 free

2 8 Individual Data ID

2 8 1 blocked

2 8 2 free

2 9 Memory - Funktion

2 9 1 blocked

2 9 2 free

3APPLIKATION PARAMETERS

3 5 Storage of the Reference Weight / Value

3 5 2 Accuracy to the display accuracy

3 5 3 10-fold higher accuracy

3 5 4 100-fold higher accuracy

3 9 Average Pieceweight Output

3 9 1 blocket

3 9 2 Display by pressing key

3 10 Accuracy Test

3 10 1 without

3 10 2 99,0 % (100 digits)

3 10 3 99,5 % (200 digits)

3 10 4 99,8 % (500 digits)

3 10 5 99,9 % (1000 digits)

3 11 Criterion for Storing Ref. Weight and Tare Value

3 11 1 At stability

3 11 2 At "increased" stability

3 12 Reference Optimizing

3 12 1 Blocked

3 12 2 Manual

3 12 3 Automatic

3 13 Forced Print when M+ is Pressed

3 13 1 free

3 13 2 blocked

4CHECKWEIGHING - APPLIKATIONSPARAMETER

4 2 Printout

4 2 1 free

4 2 2 blocked

4 3 Control through Control Lines

4 3 1 Only in check range

4 3 2 Always

4 3 3 Only at stability in check range

4 3 4 Only at stability

5DATA INTERFACE PARAMETER

5 1 Baud Rate

5 1 1 150 baud

5 1 2 300 baud

5 1 3 600 baud

5 1 4 1200 baud

5 1 5 2400 baud

5 1 6 4800 baud

5 1 7 9600 baud

5 1 8 19200 baud

5 2 Parity Bit

5 2 1 Mark

5 2 2 Space

5 2 3 Odd

5 2 4 Even

5 3 Number of Stop Bits

5 3 1 1 stop bit

5 3 2 2 stop bits

5 4 Handshake Mode

5 4 1 Software

5 4 2 Hardware, 2 characters after CTS

5 4 3 Hardware, 1 character after CTS

SARTORIUS QC - Scales

6UTILITIES

6 1 Data Output

6 1 1 Single print without stability

6 1 2 Single print after stability

6 1 3 Single print at stability

6 1 4 Auto print without stability

6 1 5 Auto print after stability

6 2 Auto Print

6 2 Stop/start by pressing key

6 2 2 Not stoppable

6 3 Auto Print Interval After

6 3 1 1 display update

6 3 2 2 display updates

6 3 3 5 display updates

6 3 4 10 display updates

6 3 5 20 display updates

6 3 6 50 display updates

6 3 7 100 display updates

7SOFTKEY APPLIKATIONS

7 1 Output of Application Parameters

7 1 1 OFF

7 1 2 All parameters

7 2 Data ID Code

7 2 1 without header

7 2 2 with header

7 3 Auto Output of the Tare Memory Data

7 3 1 Last net value

7 3 2 Tare memory data (total)

7 4 Data Output with Time and ID

7 4 1 keineNo output

7 4 2 Output of Date and Time

7 4 3 Output of article ID no.

7 4 4 Output of Date and Time and article ID no.

7 5 Output of Header Lines 1 and 2

7 5 1 No output

7 5 2 Output 1st header line

7 5 3 Output 2nd header line

7 5 4 Output both lines

7 6 Output og "wRef" and "nRef"

7 6 1 No output

7 6 2 Piece count "nRef"

7 6 3 Average piece weight "wRef"

7 6 4 Both

7 7 Output: Net / Tare / Gross / Counting Resault

7 7 1 No output

7 7 2 Output of net value and counting result

7 7 3 Output of Net/tare-comp./gross or counting result

7 7 4 Output of Net/tare-comp./gross and counting result

7 8 Line Feed

7 8 1 No line feed

7 8 2 Line feed - 1 line

7 8 3 Line feed - 2 lines

7 8 4 Line feed - 3 lines

8ADDITIONAL FUNCTIONS

8 1 Menü Access

8 1 1 Change mode

8 1 2 List mode

8 2 Acoustic Signal

8 2 1 On

8 2 2 OFF

8 3 Keyboard Function

8 3 1 free

8 3 2 Blocked

8 4 Universal Key

8 4 1 p

8 4 2 =

8 4 3 =

8 4 4 g

8 4 5 o

8 4 6 u

8 4 7 z

8 4 8 S

8 5 Power-On Mode

8 5 1 off > on / Standby

8 5 2 off > on

8 5 3 on / standby

8 5 4 auto on

8 6 Display Backlighting

8 6 1 ON

8 6 2 OFF

8 6 3 Auto-off after 2 minutes

8 7 Auto OFF

8 7 1 ON

8 7 2 OFF

9 1 RESET

9 1 1 ON

9 1 2 OFF

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Sartorius Scala

Sartorius

Sartorius SIWABBP Manuale utente

Sartorius

Sartorius Master series Manuale utente

Sartorius

Sartorius ME415S Manuale utente

Sartorius

Sartorius Cubis MCA10202S Series Manuale utente

Sartorius

Sartorius Signum 1 Manuale utente

Sartorius

Sartorius Genius Series Manuale utente

Sartorius

Sartorius PMA7501-Y00G Manuale utente

Sartorius

Sartorius PMA.Quality PMA7501 Manuale utente

Sartorius

Sartorius EC1XS Manuale utente

Sartorius

Sartorius PMA.Power PMA35001 Manuale utente

Sartorius

Sartorius MW1P Manuale utente

Sartorius

Sartorius CW3P Manuale utente

Sartorius

Sartorius BL310 Manuale utente

Sartorius

Sartorius CH1NE Manuale utente

Sartorius

Sartorius Cubis Series Manuale utente

Sartorius

Sartorius PMA.Vision Manuale utente

Sartorius

Sartorius IS16EDE-H Manuale utente

Sartorius

Sartorius BP 301S Manuale utente

Sartorius

Sartorius la series Manuale utente

Sartorius

Sartorius CAPXS Series Manuale utente

Sartorius

Sartorius GPC65-CW Manuale utente

Sartorius

Sartorius Economy Series Manuale utente

Sartorius

Sartorius PMA.HD Manuale utente

Sartorius

Sartorius YDS01SQP Manuale utente

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente