Safety Instructions
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
WARNING! Dust forms when grinding which can cause injuries if
inhaled. Use an approved breathing mask. Always provide for
good ventilation while machine is in use.
Always wear:
Approved protective helmet.
Approved hearing protection.
Protective goggles or a visor.
Dust Mask
Dust forms when grinding, which can cause injuries if inhaled.
Always wear approved protective gloves.
Always wear sturdy non-slip boots with steel toe-caps.
WARNING
Under no circumstances may the machine be started without ob-
serving the safety instructions.
Should the user fail to comply with these, SASE Company Inc or its
representatives are free from all liability both directly and indirectly.
Read through these operating instructions and make sure that you
understand the contents before starting to use the machine.
Should you, after reading these safety instructions, still feel uncer-
tain about the safety risks involved you must not use the machine,
please contact your SASE representative for more information.
Only qualified personnel should be allowed to operate machinery.
Never use a machine that is faulty. Carry out the checks, mainte-
nance and service instructions described in this manual. All repairs
not covered in this manual must be performed by a repairer nomi-
nated by either the manufacturer or distributor.
Always wear personal safety equipment such as sturdy non-slip
boots, ear protection, dust mask and approved eye protection.
The machine should not be used in areas where potential for fire or
explosions exist.
Machinery should only be started when grinding heads are resting
on the ground.
The machine should not be started without the rubber dust skirt
attached. It is essential a good seal between floor and machine be
established for safety, especially when operating in dry grinding
applications.
When changing the grinding discs ensure power supply to the unit
is OFF by engaging the Emergency Stop button and the power-plug
disconnected.
The machine should not be lifted by handles, motor, chassis or
other parts. Transportation of the machine is best done on a pallet /
skid to which the machine must be firmly secured.
Extreme caution must be used when moving machinery by hand on
an inclined plane. Even the slightest slope can cause forces/
momentum making the machinery impossible to brake manually.
Never use the machine if you are tired, if you have consumed any
alcohol, or if you are taking medication that could affect your vision,
your judgment or your coordination.
Never use a machine that has been modified in any way from its
original specification.
Be on your guard for electrical shocks. Avoid having body contact
with lightning conductors/metal in the ground.
Never drag the machine by means of the cord and never pull out
the plug by pulling the cord. Keep all cords and extension cords
away from water, oil and sharp edges.
