Satel INTEGRA Manuale di servizio

Satel INTEGRA Integration Module Settings Guide

Last update16/10/2019

ACFA Intellect – Satel INTEGRA Integration Module Settings Guide
– 2
Table of contents
List of Terms Used in Satel INTEGRA Integration Module Settings Guide ...............................3
Introduction into Satel INTEGRA Integration Module Settings Guide......................................4
1 Purpose of the document........................................................................................................................ 4
2 General information about theSatel INTEGRAintegration module..................................................... 4
Supported Hardware and Licensing of the Satel INTEGRA Integration Module......................5
Configuration of the Satel INTEGRA Integration Module..........................................................7
1 Procedure for configuration of the Satel INTEGRA Integration Module ............................................... 7
2 Configuring the Satel INTEGRA panel connection ................................................................................. 7
2.1 Connection over RS-232 ........................................................................................................................................... 7
2.2 Connection over Ethernet ........................................................................................................................................ 8
3 Additional settings of the integration module Satel INTEGRA .............................................................. 9
4 Configuring the Satel INTEGRA devices .................................................................................................. 9
Working with the Satel INTEGRA Integration Module.............................................................12
1 General information about working with the Satel INTEGRA Module ................................................ 12
2 Managing the Satel INTEGRA Panel ...................................................................................................... 12
3 Managing the Satel INTEGRA Partition................................................................................................. 12
4 Managing the Satel INTEGRA Zone ....................................................................................................... 13
5 Managing the Satel INTEGRA Output.................................................................................................... 13
6 Managing the Satel INTEGRA Door........................................................................................................ 13

 Satel INTEGRA Integration Module Settings Guide

List of Terms Used in Satel INTEGRA Integration Module Settings Guide – 3

1 List of Terms Used in Satel INTEGRA Integration Module Settings Guide

Server

- a computer configured as an

Intellect

Server.

FSA -

Fire Security Alarm system (in this case,

Satel

).

Panel -

the Satel INTEGRA advanced control panel of one of the supported models.

Partition -

a part of the premises controlled by the Satel INTEGRA FSA.

Zone

- a smaller space or a separate object (e.g. window) within the partition controlled by the Satel INTEGRA FSA.

Output

- a programmable device connected to the Satel INTEGRA Panel that controls exit from one partition to another.

Trouble

- any problem registered by the Satel INTEGRA FSA.

Alarm

- a signal to the operator to react to a trouble.

Two-code arming/disarming -

amethod to authorize the operator's attempt to arm or disarm a partition by entering two

numerical codes.

 Satel INTEGRA Integration Module Settings Guide

Introduction into Satel INTEGRA Integration Module Settings Guide – 4

2 Introduction into Satel INTEGRA Integration Module Settings Guide

On the page:

•Purpose of the document

•General information about theSatel

INTEGRAintegration module

2.1 Purpose of the document

This

Satel INTEGRA Integration Module Settings Guide

is a reference manual designed for

Satel INTEGRA

Module configuration

technicians and operators. This module functions as part of security and fire alarm systems built on the basis of

ACFA Intellect

This Guide contains the following information:

1. General information about the

Satel



INTEGRA

integration module;

2. Configuration of the

Satel INTEGRA

integration module;

3. Working with the

Satel



INTEGRA

integration module.

2.2 General information about the

Satel INTEGRA

integration module

The

Satel INTEGRA

integration module is part of

FSA

systems built on the basis of the

ACFA Intellect

. It is designed to control

the

Satel INTEGRA

FSAsystem.

Before configuring the

Satel



INTEGRA

integration module, the following actions must be performed:

1. Install the required hardware at the secured object.

2. Connect the

Satel INTEGRA FSA

to the Server.

Note.

Detailed information about the

Satel INTEGRA FSA

system can be found in the official documentation by Satel.



Note.

The device is connected to the computer through the RS-232 or Ethernet interface. Please ensure the corresponding

drivers are installed on the Server.



 Satel INTEGRA Integration Module Settings Guide

Supported Hardware and Licensing of the Satel INTEGRA Integration Module – 5

3 Supported Hardware and Licensing of the Satel INTEGRA Integration Module

Manufacturer SATEL

Schuberta 79

80-172 Gdansk, Poland

tel. +48 58 320-94-00

fax +48 58 320-94-01

e-mail: [email protected]

www.satel.pl

Integration type Low-level protocol

Equipment connection RS-232, Ethernet

Supported equipment

Equipment Function Features

Integra 32 Advanced control panel 8 up to 32 zones

16 partitions

4 objects

8 up to 32 programmable outputs

28 timers

69 users

Event log: 439

RS-232 port

Integra 64 Advanced control panel 16 up to 64 zones

32 partitions

8 objects

16 up to 64 programmable outputs

64 timers

201 users

Event log: 5,887

RS-232 port

Integra 64 Plus Advanced control panel Grade 3 security level

Full support of EN50131security standards

Up to 64 zones

32 partitions

8 objects

Extension up to 64 programmable zones

64 timers

201 users

Event log: 5,631

RS-232, Ethernet, USB ports

Integra 128 Plus Advanced control panel Grade 3 security level

Full support of EN50131security standards

Up to 128 zones

32 partitions

8 objects

Extension up to 128 programmable zones

64 timers

249 users

Event log: 22,527

RS-232, Ethernet, USB ports

 Satel INTEGRA Integration Module Settings Guide

Supported Hardware and Licensing of the Satel INTEGRA Integration Module – 6

Equipment Function Features

Integra 128-WRL Advanced control panel Integrated GSM/GPRS module

Integrated ABAX module

8 up to 128 wired and wireless zones

32 partitions

8 objects

8 up to 128 programmable outputs

64 timers

249 users

Event log: 21,503

RS-232, Ethernet ports

Integra 256 Plus Advanced control panel Grade 3 security level

Full support of EN50131security standards

Up to 256 zones

32 partitions

8 objects

Extension up to 256 programmable zones

64 timers

249 users

Event log: 24,575

RS-232, Ethernet, USB ports

Licensing

Per one control panel.

 Satel INTEGRA Integration Module Settings Guide

Configuration of the Satel INTEGRA Integration Module – 7

4 Configuration of the Satel INTEGRA Integration Module

4.1 Procedure for configuration of the Satel INTEGRA Integration Module

The

Satel INTEGRA

integration module in

ACFA Intellect

is configured as follows:

1. Configuring the Satel INTEGRA panel connection.

2. Additional settings of the integration module Satel INTEGRA.

3. Configuring the Satel INTEGRA devices.

4.2 Configuring the Satel INTEGRA panel connection

На странице:

•Connection over RS-232

•Connection over Ethernet

The

Satel INTEGRA

panel connection is performed on the settings panel of theSatel Panelobject created on the basis of

theComputerobject on theHardwaretab of theSystem Settingsdialog.

The panel may be connected to the

ACFA Intellect

Server via RS-232 or Ethernet interfaces.

4.2.1 Connection over RS-232

To connect over RS-232, do the following:

Attention!

The identifier of the Satel Panel object must be a natural number.



 Satel INTEGRA Integration Module Settings Guide

Configuration of the Satel INTEGRA Integration Module – 8

1. Go to the settings panel of the Satel Panel object.

2. Select theRS-232 radio button in the Connection section (1).

3. In the Port list, select the COM-port used for connection (2).

4. Click Apply (3).

Configuring the

Satel INTEGRA

panel connection is complete.

4.2.2 Connection over Ethernet

To connect over Ethernet, do the following:

1. Go to the settings panel of theSatel Panelobject.

2. Select the TCP/IP radio button in the Connection section (1).

3. Enter the IP address of the panel in the field below (2).

4. In the TCP port field, enter the connection port (3).

5. Click Apply (4).

Configuring the

Satel INTEGRA

panel connection is complete.

 Satel INTEGRA Integration Module Settings Guide

Configuration of the Satel INTEGRA Integration Module – 9

4.3 Additional settings of the integration module Satel INTEGRA

Additional settings of the integration module

Satel INTEGRA

are configured as follows:

1. Go to the settings panel of theSatel Panelobject.

2. Click the Send accounts button (1) to send the data of the

Access Manager

module to the Satel INTEGRA panel.

3. Set the Send users dynamically checkbox (2) to automatically transfer the data of the

Access Manager

module to the

Satel INTEGRA panel if they change.

4. In thePIN code to control panelyou may set the PIN code used to authorize the connection to the control panel (3).

5. Set theUse user PIN code for reactionscheckbox to make the panel operators (

ACFA



Intellect

users) to enter their own

PIN codes to react to events from the panel in addition to the main panel code (4). The user PIN code is set in the

Intellect

user settings, seeUser registration and removal.

6. In theTime to second PIN enterfield you may select the delay between entering the panel code and the user code in

seconds(5).

7. Configure the additional emulations that facilitate the panel operation using theMap(seeWorking with the Satel

INTEGRA Integration Module):

• If theShow communication lost at all objectscheckbox is set, the panel communication failures will be indicated

on all device object icons on theMap(1).

•If theShow alarms from zones at the panel iconcheckbox is set, the alarms from

Satel INTEGRA

zones will be

indicated on theSatel Panelobject icon on theMap(2).

•If theShow armed zone at the inputscheckbox is set, the armed zone will be indicated on the

Satel

INTEGRA

output icons on theMap(3).

8. Click Apply (9) to save the changes.

Additional settings of the integration module

Satel INTEGRA

are configured.

4.4 Configuring the Satel INTEGRA devices

The

Satel INTEGRA

devices can be added in two ways:

1. Automatically. In order to do this, go to the settings panel of the Satel Panel object and click Read configuration from

panel(1).

 Satel INTEGRA Integration Module Settings Guide

Configuration of the Satel INTEGRA Integration Module – 10

As a result, a tree of objects corresponding to

Satel INTEGRA

devices connected will be created. The configuration can be

updated in this way at any time when new devices are connected to the panel. If the names of the existing devices should

be preserved, check the Don't update names box (2) and click Apply (3).

2. Manually by creating the corresponding objects on the basis of the Satel Panel object.



The settings panel of each device object only displays the object type and enables selecting the icon that will be used to

indicate the device on the Map (see Working with the Satel INTEGRA Integration Module).

Note

All devices in the object tree are configured using the

Satel INTEGRA

vendor software or the hardware itself. For

information on device configuration, please refer to the vendor documentation: http://www.satel.pl/en/

installer/man.



Altri manuali per INTEGRA

Indice

Altri manuali Satel Hardware per computer

Satel

Satel GSM-X LTE Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente