Satel ACCO-KP2 Manuale utente

21 ACCO-KP2 SATEL

ACCO-KP2

Access control module ACCO

USER MANUAL

Firmware version 1.00 acco-kp2_u_en 06/22

SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND

tel. +48 58 320 94 00

www.satel.eu

IMPORTANT

Before you start using the module, please read carefully this manual in order to avoid

mistakes that can lead to malfunction or even damage to the equipment.

Changes, modifications or repairs not authorized by the manufacturer shall void your rights

under the warranty.

SATEL aims to continually improve the quality of its products, which may result in changes in

their technical specifications and software. The current information on the introduced

modifications is available on our website.

Please visit us:

https://support.satel.pl

The declaration of conformity may be consulted at www.satel.eu/ce

Factory default code:

Administrator code: 12345

The following symbols may be used in this manual:

- note,

- caution.

CONTENTS 
Introduction........................................................................................................................3 
Glossary............................................................................................................................3 
Users.................................................................................................................................4 
1 User authorization ....................................................................................................................4 
2 Authorization by using two identifiers........................................................................................5 
3 Code.........................................................................................................................................5 
3.1 Factory default code ......................................................................................................................5 
4 User rights................................................................................................................................5 
Using the ACCO-KLCDR keypad......................................................................................5 
1 Description of the keypad.........................................................................................................6 
1.1 LEDs ..............................................................................................................................................6 
1.2 Display ...........................................................................................................................................7 
1.3 Keys ...............................................................................................................................................7 
1.4 Built-in proximity card reader .........................................................................................................7 
1.5 Audible signaling............................................................................................................................7 
2 Unlocking the door....................................................................................................................8 
2.1 Getting access ...............................................................................................................................8 
Getting access by using the code.......................................................................................................8 
Getting access by using the proximity card ........................................................................................8 
Getting access by using two identifiers...............................................................................................8 
2.2 On duty...........................................................................................................................................8 
2.3 Access denied................................................................................................................................8 
3 Other functions available when the code is used......................................................................9 
3.1 User menu......................................................................................................................................9 
List of functions ...................................................................................................................................9 
3.2 Blocking the door ...........................................................................................................................9 
3.3 Unblocking the door.......................................................................................................................9 
3.4 Restoring the door to normal operation mode ...............................................................................9 
3.5 Changing the code.......................................................................................................................10 
3.6 Module data .................................................................................................................................10 
4 Other functions available when the proximity card is used......................................................10 
4.1 Blocking the door .........................................................................................................................10 
4.2 Unblocking the door.....................................................................................................................10 
4.3 Restoring the door to normal operation mode .............................................................................10 
Using the ACCO-SCR keypad.........................................................................................10
1 Description of the keypad.......................................................................................................11 
1.1 LEDs ............................................................................................................................................11 
1.2 Keys .............................................................................................................................................11 
1.3 Built-in proximity card reader.......................................................................................................11 
1.4 Audible signaling..........................................................................................................................12 
2 Unlocking the door..................................................................................................................12 
2.1 Getting access .............................................................................................................................12 
Getting access by using the code.....................................................................................................12 
Getting access by using the proximity card ......................................................................................12 
Getting access by using two identifiers.............................................................................................12 
2.2 Access denied..............................................................................................................................13 
3 Other functions available when the code is used....................................................................13 
3.1 Blocking the door .........................................................................................................................13 
3.2 Unblocking the door.....................................................................................................................13 
3.3 Restoring the door to normal operation mode .............................................................................13 
4 Other functions available when the proximity card is used......................................................13 
4.1 Blocking the door .........................................................................................................................13 
4.2 Unblocking the door.....................................................................................................................13 
4.3 Restoring the door to normal operation mode .............................................................................14 

 SATEL ACCO 

Using the proximity card readers.....................................................................................14
1 Description of the CZ-EMM and CZ-EMM2 readers...............................................................14 
1.1 Bicolor LED ................................................................................................................................. 14 
2 Description of the CZ-EMM3 and CZ-EMM4 readers.............................................................15 
2.1 LEDs............................................................................................................................................ 15 
2.2 Bell key........................................................................................................................................ 15 
3 Audible signaling....................................................................................................................15 
4 Unlocking the door.................................................................................................................16 
4.1 Getting access ............................................................................................................................ 16 
4.2 Access denied............................................................................................................................. 16 
5 Other functions.......................................................................................................................16 
5.1 Blocking the door ........................................................................................................................ 16 
5.2 Unblocking the door.................................................................................................................... 16 
5.3 Restoring the door to normal operation mode ............................................................................ 17 
Using the CZ-DALLAS reader .........................................................................................17
1 Description of the CZ-DALLAS reader....................................................................................17 
1.1 Bicolor LED ................................................................................................................................. 17 
2 Unlocking the door.................................................................................................................17 
2.1 Getting access ............................................................................................................................ 17 
2.2 Access denied............................................................................................................................. 17 
3 Other functions.......................................................................................................................18 
3.1 Blocking the door ........................................................................................................................ 18 
3.2 Unblocking the door.................................................................................................................... 18 
3.3 Restoring the door to normal operation mode ............................................................................ 18 
Unlock button...................................................................................................................18
Other ways to block the door...........................................................................................18
Other ways to unblock the door.......................................................................................19
Other ways to restore the door to normal operation mode...............................................19 
 
 

SATEL ACCO-KP2 3

1. Introduction

Thank you for choosing our product. We hope you will be satisfied with your choice. Please

remember that we are always ready to provide you with professional assistance and

information on our products. Visit our website www.satel.eu to find more information about

the products offered by SATEL sp. z o.o.

The ACCO-KP2 module is used to control the access to a room, a building or an area. Its job

is to control a single door. Only an authorized person will be able to open the door. Devices

connected to the module, such as LCD keypads, keypads or readers, are used to identify

which person is authorized. The person who is authorized to open the door has the right

identifier (card / code). The access can be limited to particular hours on selected days.

In this manual you will find information on how to use the ACCO-KP2 module as a stand-

alone device or as a part of the ACCO access control system.

2. Glossary

Access denied –response to when an unauthorized user attempts to get access (the user

has an unknown identifier or is not authorized to get access at the time).

Access granted –permission to open the door after the user is identified and the user rights

are verified.

Access schedule –schedule that is assigned to the user and used to define the rules of

access to a door. Days and hours during which the user has access to the door are

specified in the access schedule.

Access time –time during which you will be able to open the door after you get access.

Alarm –warning of a situation that may compromise the operation of the access control

module (e.g. door opened by force, tamper etc.). Action is required to address this

situation. The alarm can be signaled in the LCD keypad, keypad or reader.

Anti Passback –function that prevents the user with access from passing back the identifier

to other persons so that they can get access. The function prohibits repeated entry or exit

by using the same identifier.

Anti-Scanner –function that prevents any attempts to test different code combinations /

different cards or Dallas iButtons in order to get access. If 5 attempts are made within

3 minutes to get access by using an unknown identifier, the terminals will be blocked for

5 minutes.

Authorized entry –opening the door by the user when access was granted after using the

entry terminal.

Authorized exit –opening the door by the user when access was granted after using the exit

terminal.

Code –string of digits used to identify the user.

Dallas iButton –chip inside a metal can shaped like a button. Each Dallas iButton has

a unique and fixed code used to identify the user.

Door –general name for a barrier that prevents unrestricted access to a protected area.

This can be a hinged door, gate, turnstile, arm barrier etc.

Door blocked –module operating mode in which access to the door cannot be granted

(the door is permanently locked).

Door opened by force –opening the door without getting access (when the door is locked).

SATEL ACCO-KP2 4

Door status control –module that supervises the door status by using a sensor connected

to the module input. The sensor reports it when the door is opened or closed.

Door unblocked –module operating mode in which access to the door is not controlled and

anyone can open it (the door is permanently unlocked).

Door unlocking –response of the module when a user is granted access.

Identifier –card, Dallas iButton, key tag or code used to identify the user.

Input activation –change of the input status to another, different from that defined for the

normal status.

Installer –the person who has installed and configured the access control module.

Long open door –it is interpreted by the module that the door is open for too long when the

door is open for longer than the “Door open time” limit.

Mantrap / airlock –door that consists of at least two doors. In order to be able to open the

next door in the mantrap / airlock, you must first close the previous door. Only one door at

a time can be opened in the mantrap / airlock.

Normal door operating mode –module operating mode in which access to the door is

controlled. It is the default operating mode of the door.

Proximity card –passive transponder in the form of a card, key tag etc. Each card has

a unique and fixed code used to identify the user.

Quit entry / exit –not opening the door after the user is granted access.

Tamper –opening the enclosure of the module, LCD keypad, keypad etc.

Terminal –device used to identify the user, e.g. LCD keypad, keypad, proximity card reader

or Dallas iButton reader. Ask the installer about the terminal if you want to find out if it acts

as the entry terminal or the exit terminal.

Terminal blocked –terminal does not respond when an identifier is used. This happens

when the “Anti-Scanner” function is at work.

Unlock button –button or external device connected to the module input that allows you to

open the door without using the user identifier.

User –person registered in the module who gets access by using an identifier.

3. Users

Users can be added in the ACCO-SOFT-LT program.

3.1 User authorization

Identification of the user and verification of the user rights is required for the purpose of

access control. The user can be identified based on:

code,

proximity card,

Dallas iButton.

Do not make your code available to other people.

If an unknown identifier is used five times, this can:

trigger an alarm,

block the terminal for 5 minutes.

5 ACCO-KP2 SATEL

3.2 Authorization by using two identifiers

The ACCO-KLCDR and ACCO-SCR keypads have a built-in proximity card reader.

The installer can configure these devices so that the user must use two identifiers for

authorization, both code and card.

3.3 Code

The code is a string of 4 to 12 digits.

If you use the code in the ACCO-KLCDR keypad, a message can be displayed asking

you to change the code. The message will be displayed every time you use the code,

until you change it.

3.3.1 Factory default code

This code is programmed in the module by default: 12345. The code is assigned to the

“Administrator” user with ID number 00001.

The user with ID number 00001 cannot be deleted from the module. The user’s

“Administrator” and “Change code” rights cannot be revoked either.

You should change the factory code before you start using the access control

module (see: “Changing the code”).

3.4 User rights

Administrator –the user can:

display the module identifier in the LCD keypad,

clear the alarm memory.

Switching –the user can:

change the door status to blocked,

change the door status to unblocked,

restore the door to normal operation mode.

The user can only change the door status by using the terminal when, according to the

access schedule, the user has access to that door.

Change code –the user can change the code by using the ACCO-KLCDR keypad.

4. Using the ACCO-KLCDR keypad

If the ACCO-KLCDR keypad is connected to the module, the users can use the code or the

proximity card.

SATEL ACCO-KP2 6

Fig. 1. ACCO-KLCDR keypad.

4.1 Description of the keypad

4.1.1 LEDs

LED

Color

Description

yellow

ON –door blocked (permanently locked)

flashing slowly –door blocked (permanently locked) after the

“Alarm – block door” type of input is activated

green

ON –door unblocked (permanently unlocked)

flashing slowly –door unblocked (permanently unlocked) after the

“Fire – unblock door” type of input is activated

flashing rapidly –access to door granted

green

LED not used

red

ON –alarm

flashing –alarm memory

7 ACCO-KP2 SATEL

4.1.2 Display

The information presented on the display help the user communicate with the module. Date

and time are displayed in the upper line. The installer can define the keypad backlight mode

and the time format to be shown on the display.

4.1.3 Keys

Use the number keys to enter the code. Use the other keys to:

- open the user menu (after you enter the code),

- exit the user menu / function,

- quit changing the code.

- get access (after you enter the code),

- run the function,

- confirm new code.



- exit the user menu / function,

- move the cursor left when changing the code.



- scroll up the list of functions,

- delete digits when changing the code,

- confirm that entry / exit is made on duty.



- scroll down the list of functions.



- run the function,

- move the cursor right when changing the code.

4.1.4 Built-in proximity card reader

The reader supports the Unique 125 kHz proximity cards and key fobs.

4.1.5 Audible signaling

1 short beep –access granted and door unlocked.

2 short beeps –door blocked, unblocked or restored to normal mode.

3 short beeps –waiting for the second identifier to be used.

1 long beep –access denied (known card or code). The user cannot unlock the door

because:

the keypad only grants access based on the code but the card has been used,

the keypad only grants access based on the card but the code has been entered.

2 long beeps –access denied (card or code unknown).

3 long beeps [after you present the card / enter the code and press / ] –access

denied (known card or code). The user cannot unlock the door because:

the user is not authorized to unlock the door according to the access schedule,

the door is blocked,

the user exceeded the defined limit of entries,

the user tries again to enter or exit –the “Anti Passback” option is enabled,

the module operates in the mantrap / airlock configuration and the other door is open.

3 long beeps [after you hold the card] –impossible to change the door status (block /

unblock / restore to normal mode), because the door status is not controlled.

SATEL ACCO-KP2 8

1 very long beep –access denied (the keypad is blocked by the “Anti-Scanner” function).

Long beep lasting 10 seconds –alarm.

4.2 Unlocking the door

The door will unlock when you are granted access. When the door is unlocked, you will be

able to open the door. The installer should tell you how much time you have to open the door

after access is granted and how much time you have to close the door. The installer should

also tell you which of the following procedures to use in order to get access.

If alarm memory is signaled in the keypad (the LED is flashing), the alarm memory

will be cleared as soon as the user with the “Administrator” right is granted access.

4.2.1 Getting access

Getting access by using the code

1. Enter the code and press or .

2. When the LED will start flashing, open the door.

Getting access by using the proximity card

1. Present the card on the keypad reader.

2. When the LED will start flashing, open the door.

Getting access by using two identifiers

1. Use the first identifier.

2. When the message will be displayed that the keypad is waiting for the second identifier –

use the second identifier.

3. When the LED will start flashing, open the door.

4.2.2 On duty

After you are granted access, when the message “On duty” is displayed (Fig. 2), you can

press to register the entry / exit as made for official purposes. Ignore the message if your

entry / exit is not connected with your official duties.

Fig. 2. Message on the possibility to register entry / exit as made for official purposes.

4.2.3 Access denied

The door will remain locked if:

the identifier is unknown,

the user cannot get access because:

the keypad only grants access based on the card, but the code has been entered,

the keypad only grants access based on the code, but the card has been used,

Altri manuali per ACCO-KP2

Indice

Altri manuali Satel Controllori di accesso IP

Satel

Satel INT-SCR Manuale utente

Satel

Satel ACCO-KP2 Manuale utente

Manuali Controllori di accesso IP popolari di altre marche

ZKTeco

ZKTeco SpeedFace-V5L Manuale utente

Jantar

Jantar REX A-1-9 Manuale utente

2N Access Unit Foglio di istruzioni

Kedacom

Kedacom KSCA120 Series Manuale utente

H3C

H3C WX2880X Manuale utente

G4S

G4S S870-EX Guida

PRASTEL

PRASTEL M2000PE Manuale utente

Allegion

Allegion interflex IF-281 Cylinder Manuale utente

TECOM

TECOM TS1067E Manuale utente

Fermax

Fermax Memokey 100C Guida utente

Fermax

Fermax CITYLINE MEMOKEY Manuale di istruzioni

Software House

Software House iSTAR Pro 2U RM Manuale di istruzioni

AKCP

AKCP SP+ Manuale utente

Bpt

Bpt HNA/102 Manuale utente

Civintec

Civintec CV9601T-T-1F Manuale utente

BioMax

BioMax N-X90W Manuale utente

ZKTeco

ZKTeco OP-200 Manuale utente

FingerTec

FingerTec s-Kadex Manuale utente