Satel SATEL-TR4+ Guida rapida alla configurazione
SATEL-TR4+
TRANSCEIVER MODULE
INTEGRATION GUIDE
Version 1.6
SATEL-TR4+
Integration Guide, Version 1.6
1
IMPORTANT NOTICE
All rights to this manual are owned solely by SATEL Oy (referred to in this user guide as SATEL).
All rights reserved. The copying of this manual (without the written permission from the owner) by
printing, copying, recording or by any other means, or the full or partial translation of the manual
to any other language, including all programming languages, using any electrical, mechanical,
magnetic, optical, manual or other methods or devices is forbidden.
SATEL reserves the right to change the technical specifications or functions of its products, or to
discontinue the manufacture of any of its products or to discontinue the support of any of its
products, without any written announcement and urges its customers to ensure, that the
information at their disposal is valid.
SATEL software and programs are delivered ”as is”. The manufacturer does not grant any kind of
warranty including guarantees on suitability and applicability to a certain application. Under no
circumstances is the manufacturer or the developer of a program responsible for any possible
damages caused by the use of a program. The names of the programs as well as all copyrights
relating to the programs are the sole property of SATEL. Any transfer, licensing to a third party,
leasing, renting, transportation, copying, editing, translating, modifying into another programming
language or reverse engineering for any intent is forbidden without the written consent of SATEL.
SATEL PRODUCTS HAVE NOT BEEN DESIGNED, INTENDED NOR INSPECTED TO BE USED IN
ANY LIFE SUPPORT RELATED DEVICE OR SYSTEM RELATED FUNCTION NOR AS A PART OF
ANY OTHER CRITICAL SYSTEM AND ARE GRANTED NO FUNCTIONAL WARRANTY IF THEY
ARE USED IN ANY OF THE APPLICATIONS MENTIONED.
Salo, FINLAND 2020
Copyright: 2020 SATEL Oy
No part of this document may be reproduced, transmitted or stored in a retrieval system in any form or by any means without the
prior written permission of SATEL Oy.
SATEL-TR4+
Integration Guide, Version 1.6
2
RESTRICTIONS ON USE –SATEL-TR4+
SATEL-TR4+ radio transceiver module has been designed to operate on 403-473 MHz, the exact
use of which differs from one region and/or country to another. The user of a radio transceiver
module must take care that the said device is not operated without the permission of the local
authorities on frequencies other than those specifically reserved and intended for use without a
specific permit.
SATEL-TR4+ is allowed to be used in the following countries. More detailed information is
available at the local frequency management authority.
Countries: AE, AT, AU, BE, BG, BR, CA, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, HR,
IE, IS, IT, JP, KR, LT, LU, LV, MT, NL, NO, PL, PT, RU, RO, SE, SI, SK, TR, US
WARNING –RF Exposure! To comply with RF exposure compliance requirements in Europe,
USA and Canada maximum antenna gain is 14dBi and a separation distance listed in a table below
must be maintained between the antenna of this device and all persons. This device must not be co-
located or operating in conjunction with any other antenna or transmitter.
Antenna Gain [dBi]
Separation distance [cm]
0
23
4
36
6
45
8
56
10
71
12
89
14
112
Host product labeling requirements
SATEL-TR4+ is intended to be integrated into a host device. Therefore, the SATEL-TR4+ product
related FCC ID and IC ID must be visible in the host device chassis:
FCC ID: MRBSATEL-TA40
IC: 2422A-SATELTA40
WARNING! Users of SATEL-TR4+ radio transceiver module in North America should be aware, that due
to the allocation of the frequency band 406.0 –406.1 MHz for government use only, the use of radio
transceiver module on this frequency band without a proper permit is strictly forbidden.
SATEL-TR4+
Integration Guide, Version 1.6
3
NOTE!
According to the requirements of the FCC, the integrator should make sure that the SATEL-TR4+
is compliant to part 15C while integrated in the host device. Output power and spurious
emissions should be verified.
NOTE!
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SATEL-TR4+
Integration Guide, Version 1.6
4
PRODUCT CONFORMITY
Under the sole responsibility of manufacturer SATEL Oy declares that SATEL-TR4+ radio
transceiver module is in compliance with the essential requirements (radio performance,
electromagnetic compatibility and electrical safety) and other relevant provisions of Directives
2014/53/EU and 2011/65/EU and Council recommendation 1999/519/EC. Therefore, the
equipment is labeled with the following CE-marking. The operating frequency range of the device
is not harmonized throughout the market area, and the local spectrum authority should be
contacted before the usage of the radio module.
SATEL-TR4+
Integration Guide, Version 1.6
5
WARRANTY AND SAFETY INSTRUCTIONS
Read these safety instructions carefully before using the product:
-Warranty will be void, if the product is used in any way that is in contradiction with the
instructions given in this manual
-The radio transceiver module is only to be operated at frequencies allocated by local
authorities, and without exceeding the given maximum allowed output power ratings.
SATEL and its distributors are not responsible, if any products manufactured by it are used
in unlawful ways.
-The devices mentioned in this manual are to be used only according to the instructions
described in this manual. Faultless and safe operation of the devices can be guaranteed
only if the transport, storage, operation and handling of the device are appropriate. This
also applies to the maintenance of the products.
SATEL-TR4+
Integration Guide, Version 1.6
6
HOST INTEGRATION
To ensure compliance with all non-transmitter functions the host manufacturer is responsible for
ensuring compliance with the module(s) installed and fully operational. For example, if a host
was previously authorized as an unintentional radiator under the Declaration of Conformity
procedure without a transmitter certified module and a module is added, the host manufacturer
is responsible for ensuring that after the module is installed and operational the host continues
to be compliant with the Part 15B unintentional radiator requirements. This module is certified
for Fixed and Mobile Applications only, for portable applications you will require a new
certification.
This device has been modularly approved. Model name, FCC and Industry Canada identifiers of
this product must appear on the outside label of the end-user equipment.
Host labelling example:
Model Name: SATEL-TA40
Contains FCC ID: MRBSATEL-TA40
IC: 2422A-SATELTA40
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
SATEL-TR4+
Integration Guide, Version 1.6
7
TABLE OF CONTENTS
IMPORTANT NOTICE ............................................................................................. 1
RESTRICTIONS ON USE –SATEL-TR4+ .................................................................. 2
PRODUCT CONFORMITY........................................................................................ 4
WARRANTY AND SAFETY INSTRUCTIONS ............................................................. 5
HOST INTEGRATION ............................................................................................. 6
TABLE OF CONTENTS ............................................................................................ 7
1INTRODUCTION ..................................................................................... 10
1.1 Terms and abbreviations......................................................................... 10
1.2 Description of the product ....................................................................... 10
2TECHNICAL SPECIFICATIONS.................................................................. 11
2.1 Absolute maximum ratings...................................................................... 11
2.2 DC electrical specifications....................................................................... 11
2.3 Specifications, SATEL-TR4+ ...................................................................... 12
3TIME PARAMETERS FOR STARTUP AND SHUTDOWN SEQUENCES......... 15
3.1 Startup sequence ..................................................................................... 15
3.2 Shutdown and ENA sequences ................................................................ 16
4ELECTRICAL INTERCONNECTION............................................................ 17
4.1 DTE connector........................................................................................... 17
4.2 Pin order of the DTE connector ................................................................ 18
4.3 Equivalent I/O Schematics ....................................................................... 19
4.4 RF interface .............................................................................................. 20
4.5 VCC_IO pin ............................................................................................... 21
SATEL-TR4+
Integration Guide, Version 1.6
8
4.6 Service pin................................................................................................ 21
4.7 Stat pin ..................................................................................................... 21
4.8 VCC pins ................................................................................................... 21
4.9 UART pins ................................................................................................. 22
4.10 GPIO pins ................................................................................................. 22
5MECHANICAL CONSIDERATIONS ........................................................... 23
5.1 Fixing device to host ................................................................................ 23
5.2 Heat transfer............................................................................................ 23
6OPERATING MODES ............................................................................... 24
6.1 Safe mode ................................................................................................ 24
6.2 Power up / power down scenarios........................................................... 24
6.3 Sleep Mode .............................................................................................. 25
6.4 Power Save Mode..................................................................................... 25
6.5 Restart ...................................................................................................... 26
7CHANGING PARAMETERS USING SL COMMANDS ................................ 27
7.1 SL Commands........................................................................................... 27
7.2 SL Command Mode .................................................................................. 28
8DEFAULT DELIVERY VALUES –SATEL-TR4+ ............................................ 29
9CONSIDERATIONS.................................................................................. 30
9.1 EMI Interferers ......................................................................................... 30
9.2 Electrostatic discharge ............................................................................. 30
9.3 Using the device in unmanned high reliability applications .................. 31
9.4 PROPOSALS FOR MORE RELIABLE RADIO LINK ....................................... 31
10 APPENDIX .............................................................................................. 32
SATEL-TR4+
Integration Guide, Version 1.6
9
10.1 Module dimensions .................................................................................. 32
10.2 SL COMMANDS......................................................................................... 32
11 VERSION HISTORY ................................................................................. 40
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Satel Ricetrasmettitore
Satel
Satel GFU27 Manuale utente
Satel
Satel SATEL-LP24 Guida rapida
Satel
Satel SATELLINE-M3-TR8 Guida rapida alla configurazione
Satel
Satel SATELLINE-1AS Manuale utente
Satel
Satel SATEL-TR49 SnapOn Guida rapida alla configurazione
Satel
Satel GFU30 Manuale utente
Satel
Satel TR489 Guida rapida alla configurazione
Satel
Satel SATELLINE-M3-R9 Guida rapida alla configurazione
Satel
Satel SATELLINE-M3-TR3 Guida rapida alla configurazione
Satel
Satel slr6 Manuale utente
