Satlink WS-6933 Manuale utente
WS-6933
R
Satellite locator
User's Manual
1
English
CONTENTS
1. GUIDE ..............................................................................................................2
1.1 IMPORTANT SAFETY INSTRUCTIONS ..................................................................................2
1.2 UNPACKING ..................................................................................................................................2
1.3 PRODUCT OVERVIEW&ILLUSTRATION................................................................................3
2. OUTLINE ..........................................................................................................4
3. THE MENU OSD INSTRUCTION .....................................................................5
3.1 SAT SETTING.................................................................................................................................5
3.2 SIGNAL SCAN...............................................................................................................................6
3.3 TOOLS .............................................................................................................................................6
3.4 SAT MANAGER ............................................................................................................................7
3.5 TP MANAGER...............................................................................................................................7
3.6 SYSTEM SETUP............................................................................................................................7
4. TECHNICAL SPECIFICATION ...........................................................................8
2
1. GUIDE
1.1 IMPORTANT SAFETY INSTRUCTIONS
Thank you for choosing our product. Before installation, we would like to re-
mind you some notes, which is very important for operating safely and prop-
erly, as follows:
• Be sure to read this user manual before starting your operation.
• You must install the dish with correct direction and angle. If the dish is not
working properly, contact your local dealer.
• When the unit is suddenly moved to a hot area from a cold area, it may
cause some problems. In that case, turn o the power, and turn on again
after 1-2 hours.
• Keep meter placed in clean space with sucient ventilation.
• Do not cover the meter with or place it on a unit that emits heat.
• Clean the case by a soft cloth with a little washing liquid.
• Do not remove the cover.
• Do not let the unit exposed to extreme heat, cold or humid conditions.
• No liquids or any other materials to come inside of the unit.
1.2 UNPACKING
Open the package and make sure it includes all below items, if any missing,
please contact the reseller for replacement.
1. Digital Satellite Meter
2. User’s manual
3. Car charger cable
4. Adaptor
5. Strap of carrying case
3
English
1.3 PRODUCT OVERVIEW&ILLUSTRATION
NO Description FUNCTION
1 Power Switch Turn on/o meter
2 LNB IN Connect to satellite antenna cable
3 LCD Screen Video display
4 USB Port Connect to PC
5 DC Slot Connect to Adaptor Input
6 Digital tube Quality shows
7Power Power indicator light
8 22KHZ 22Khz indicator light
913V Verticalpolarization voltage output light
10 18v Horizontal polarization voltage output light
11 LOCK Signal lock indicator light
12 Charger Charger indicator light
13 OK OK key
14 RETURN RETURN KEY
15 ARight KEY
16 ZDOWN KEY
17 BLeft KEY
18 YUp KEY
19 Torch Torch
20 Cover The battery cover
4
2. OUTLINE
• Digital meter for signal strength and quality
• Sound and Light Alarm for Locking Signal
• Auto Calculate Angle of AZ ,EL
• Supports DISEQC 1.0/1.1 ,0/22khz Tone
• Beep Integrated
• LNB short protect
• 7.4V/800mAh Li-Ion Battery Included
• Software upgrade via USB port
• Easy to carry
5
English
3. THE MENU OSD INSTRUCTION
If you have installed and connected the cables of the meter,open the power
switch, into the main menu.
• Sat Setting
• Signal Find
• Tools
• SAT Manager
• TP Manager
• System Setup
Press YZ key to move the cursor up or down in the menu interface, then use
OK to confirm a selection.
3.1 SAT SETTING
• Sat Name: press AB key to select satellite.
• LNB Type: press AB key to select LNB Type.
• Low Freq: press AB key to select Low Freq
or press OK , then use the YZ key to input
the value.
• High Freq: press AB key to select Hi Freq
or press OK , then use the YZ key to input
the value.
• TP NUM: press ABkey to select TP number.
• Frequency: Frequency of the current tran-
sponder, input the value by using the
YZ keys.
• Symbrate: symbol rate of the current tran-
sponder, input the value by using the
YZ keys.
• Polarity: press AB key to change vertical or
horizontal of polarization.
• 22K: press AB key to switch the 22K tone; if
you select universal type, the 22K setting is
AUTO.
• DiSEqC Mode: press AB key to set the type
of port as DiSEqC1.0/1.1 or Unicable.
6
• DisEqc type & Input: If we select diseqc1.0/1.1, we can press AB key to set
the port number. If select Unicable, we can press AB key to select IF Chan-
nel, and use YZ key to input Center Frequency.
• LNB Power: press AB key to switch LNB power on /o.
When all of settings are ok, press RETURN , then press OK for save the edit.
3.2 SIGNAL SCAN
Move the cursor to SAT, we can press AB key
into satellite list, then press YZ key to select
satellite you want.
Move the cursor to F, we can press AB key into
TP list, then press YZ key to select TP
you want. We can also press OK , then use
YZ key to edit TP frequency.
Move the cursor to SR, we can press OK , then use YZ key to edit Symbol
rate.
Move the cursor to POL, we can press AB key to change vertical or horizontal
of polarization.
When all of settings are ok, we can check the LNB signal.
3.3 TOOLS
Press YZ key to move the cursor, then press OK
to select the option. Press YZ key to input val-
ue, and press AB key to set east/
west or north/south. The bottom of the screen
can get the parameters of the satellite.
7
English
3.4 SAT MANAGER
• Add Satellite
• Edit Satellite
• Delete Satellite
Add Satellite: the setting refer to Antenna Setup.
Edit Satellite: press AB key to page up /down; then press YZ key to select
the satellite; press OK to edit satellite setting, refer to Antenna Setup.
Delete Satellite: refer to Edit Satellite then press OK to delete satellite.
3.5 TP MANAGER
• Add Transponder
• Edit Transponder
• Delete Transponder
Please refer to Satellite Setup.
3.6 SYSTEM SETUP
The first line is the Hardware serial number
and the software Version.
• Set Language: switch the system language.
• Key Press Beep: switch the key beep.
• Signal Lock Beep: switch beep alarm.
• Flashlight: switch flashlight.
• Signal Strength: select the signal unit.
• Local longitude: set local longitude.
• Local latitude: set local latitude.
8
4. TECHNICAL SPECIFICATION
TRANSMISSION STANDARDS
DVB-S/S2
SATELLITE INPUT/DEMODULATION
Connector Type F Type
Input Frequency 950 to 2150 MHz
Signal Input Level - 65 to -25 dBm
Band Switch Control 22KHz
LNB Supply 13V/18V, IMax300mA
Demodulation Type QPSK /8PSK /16APSK
Symbol Rate 2<Rs<45Mband(SCPC/MCPC)
LCD FEATURES
LCD Type TFT Positive transflective
Number of Dots 240(RGB)*320
Active area (WxH) 36.72W * 48.96HMM2
DATA SERVICE PORT
Connector USB
Data protocol USB to RS-232
POWER SUPPLY
Li-Ion Battery 7.4V/800mAh
Adapter OUTPUT :DC12V/1A, INTUPT :100-240VAC
50/60Hz
Power consumption Max. 5W
PHYSICAL CHARACERSTICS
Size (W x D x H) 8x16x4(cm3)
Net Weight 0.25kg
Altri manuali per WS-6933
1
Indice
Altri manuali Satlink Accessori per fotocamere
