SBI HEATFLOW S5 Manuale utente
Installation Instruction HEATFLOW S5 English 46310A
2023-03-15
1
Installation
Instructions
HEATFLOW S5 – Forced air system
AC02110
WARNING: THE CLEARANCE FOR COMBUSTIBLE MATERIAL OF THIS ACCESSORY SUPERSEDES
THOSE OF THE STOVE
WARNING: THIS ACCESSORY CAN ONLY BE INSTALLED WITH SINGLE WALL PIPES AND MAY
REQUIRE MOVING THE STOVE FURTHER FROM COMBUSTIBLE MATERIAL
WARNING: DECORATIVE PANELS MUST BE REMOVED TO USE THIS ACCESSORY. THIS WILL NOT
ALTER THE PRODUCT WARRANTY
WARNING: The HEATFLOW S5 CANNOT BE ASSEMBLED WITH A HEATSHIELD (AC02762),
LOWERED CEILING, INSIDE AN ALCOVE OR IN A MOBILE HOME.
WARNING: The HEATFLOW S5 IS NOT A CENTRAL HEATING SYSTEM
Installation Instruction HEATFLOW S5 English 46310A
2023-03-15
2
1. General information
This forced heat distribution system supports heating adjacent and upper rooms located at a
maximum distance of 50’ (15,2m) from the stove. Rooms below the HEATFLOW S5 cannot be
heated with the system.
2. Content of the accessory
Flue Collar (PL72473)
(A)
1x
Back panel (PL72474)
(B)
1x
Front panel (PL72470)
(C) 1
x
Right panel (PL72477)
(D) 1x
Left panel (PL72471)
(E)
1x
Top panel (PL72472)
(F)
1x
Control sub-assembly (SE72475)
(G) 1x
1’’ Self-adhesive gasket (AC06950)
(H) 4’ (121cm)
Blower(44121)
(I) 1 x
Blower end adaptor (49091)
(J) 1x
Metal screw #10 x 3/8’’ (30132)
(K) 80x
6’’ Adaptor (PL66220)
(L) 1
x
Door handle (PL72481)
(M) 1x
Self drilling screw #10 x 5/8” (30163)
(N) 20x
Thread cutting screw #10 x 3/8” (30029)
(O) 4x
Installation Instruction HEATFLOW S5 English 46310A
2023-03-15
3
Shaft extension (PL72480)
(P) 1x
Mechanical screw 1/4 x ¾” (30017)
(Q) 1x
Locknut ¼ (30220)
(R) 1x
Damper Box (PL72478)
(S) 1x
Motor Connector (60437)
(T) 1x
3. Tools required
Screwdriver Ratchet wrench & 5/16" socket Scissors
Protective gloves Measuring tape Drill
Hammer pliers Metal snips
Installation Instruction HEATFLOW S5 English 46310A
2023-03-15
4
4. Other parts (not-included)
•Rigid galvanised ducts (non-insulated only)
•Metal air registers
•Elbow ducts
•Airflow damper or damper blades
•HVAC foil tape
•Electrical wire 14-2
•Electrical wire connectors
•Anti-Seize
•Self drilling screws
•Flat back paint
Installation Instruction HEATFLOW S5 English 46310A
2023-03-15
5
5. Dimensions
Installation Instruction HEATFLOW S5 English 46310A
2023-03-15
6
Installation Instruction HEATFLOW S5 English 46310A
2023-03-15
7
6. Assembly instructions
WARNING
The HEATFLOW S5 can only be assembled with a single wall pipe,refer to the Annex for double
wall pipe retrofit.
The HEATFLOW S5 cannot be assembled with a Heat shield (AC02762), lowered ceiling, inside
an alcove or in a mobile home.
THE HEATFLOW S5 CANNOT BE INSTALLED IN REDUCED CLEARANCES
1. Remove the air baffle
(BB) by removing the 4
screws (AA) at the
back of stove.
Wear protective gloves for the following instructions
Installation Instruction HEATFLOW S5 English 46310A
2023-03-15
8
2. Place the flue collar (A)
with 3 self-drilling
screws. (N)
3. Place the back panel
(B) with the 10 metal
screws (K) on the back
of stove.
Installation Instruction HEATFLOW S5 English 46310A
2023-03-15
9
4. Cut the self-adhesive
gasket (H) into 4 parts
and stick them on the 4
bent up frame of the
front panel. (C)
5. Place the front panel
(C) on the top of stove.
Installation Instruction HEATFLOW S5 English 46310A
2023-03-15
10
6. Install the right panel
(D) with 10 metal
screws (K) on the front
and back panels.
7. Install the left panel (
E
)
with 10 metal screws
(K) on the front and
back panels.
8. Install the 6’’ adaptor
(L) on the top panel. (F)
IMPORTANT`: The
dents in DETAIL B on
the top panel must be
pointing downward.
Altri manuali per HEATFLOW S5
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali SBI Stufa
