Scania Higer A30 Manuale utente
To User
To User
Scania Higer A30, mounted with original SCANIA chassis, is a
newly developed deluxe coach.
The coach mainly runs on the high graded road and highway for
passenger transportation and tourism, etc.
This driver’s instruction contains operation, structure, specification
and maintenance of the coach body. You are kindly advised to read the
manual carefully for the correct operation and maintenance of your
coach.
In regard to the chassis instruction, please read the “Scania
Driver’s Instructions” and keep the operating instructions within the
vehicle.
Correct operation and maintenance can result in good
performance and longer service of the coach and lower operating
costs.
This driver’s instruction is edited on basis of the products before
delivery from the factory. Higer Bus Company Limited reserves the
right to modify the specification or change the parts or components of
this model at any time without modification of the delivered coaches.
In case of any questions or suggestions concerning our coaches,
you are welcome to provide feedback for our continuous improvement
of our products as well as better service to you.
Higer Bus Company Limited
June 2012
Catalog
Catalog
Vehicle Identification.............................................................1
Specification..........................................................................2
Body structure.......................................................................4
Driver’s area .........................................................................5
Passenger door.....................................................................6
Safety equipment................................................................12
Rocker switch......................................................................19
Driver’s seat........................................................................29
Rear view mirror..................................................................32
Passenger area...................................................................34
Electronic clock...................................................................36
Microphone amplifier...........................................................39
DVD....................................................................................40
LCD.....................................................................................69
Reverse monitor..................................................................70
Air conditioning ...................................................................72
Heating system...................................................................81
Defroster.............................................................................84
Electrical part......................................................................87
Vehicle Identification
Vehicle Identification
Nameplate
The coach body nameplate is riveted on the RHS door entrance
panel of the front passenger door entrance.
1
Specification
Specification
Body
Parking on slope % ≥ 20
Passenger door - Out swing
Roof hatch 2
Window -
Double glazing front
windshield, the rest is
tempered glass
Electrical apparatus - 24V negative grounded
A/C system
Type - Roof mounted condenser
and evaporator
Cooling power kw 30
Refrigerant - R134A
Inner
equipment Media player
2
Specification
Inner
equipment
Front headlamps - xenon headlamps/
halogen headlamps
Daylight lamp+ LED night
lamp -
Floor leatheroid - domestic floor leatheroid
Composite floor -
Guardrail - -
CAN -
3
Body structure
Body structure
1 Front fog lamp 6 Rear view mirror
2 Headlamp 7 Passenger door
3 Decoration panel 8 Front wheel
4 Windscreen wiper 9 Luggage compartment
5
Windscreen
10
Rear wheel
4
Driver’s area
Driver’s area
1 Rocker switch(Centre console) 12 Retarder control handle
2
Microphone amplifier
13
Gear selection button
3
Media player
14
Brake pedal
4
Reverse monitor
15
Accelerator pedal
5
Vent
16
Rocker switch(L-panel)
6 Rocker switch 17
Rear view mirror
control button
7
Combination switch
18
Microphone
8
Steering wheel
19
A/C control panel
9
Ignition switch
20
Parking brake
10
Instrument cluster
21
Driver’s seat
11 Rocker switch and Headlamp
knob
5
Passenger door
Passenger door
1. Mechanical lock
The mechanical lock is installed on the outside of front door panel.
Unlock the door
Rotate the lock cover by 180° to expose the key hole;
Insert the key and turn clockwise by 90°;
Turn the handle (with the key) clockwise by 90° and then
release it. The handle will automatically turns back by 90° and
the lock pin extends out;
Turn the key counterclockwise by 90° and then withdraw the
key;
Rotate the lock cover to cover the key slot.
Lock the door
Rotate the lock cover by 180° to expose the key hole;
Insert the key and turn clockwise by 90°;
Turn the handle (with the key) counterclockwise by 90° and then
release it. The handle will automatically turns back by 90° and
the lock pin extends out;
6
Passenger door
Turn the key counterclockwise by 90° and then withdraw the
key;
Rotate the lock cover to cover the key hole.
Caution:
Once the door is secured by the key, the electro-pneumatic
controls of the door are disabled.
2. Remote control
Press the button“ ” to unlock the door. Press the button” ” to
lock the door.
Replace the battery in the remote control when the indicator
light becomes dim or the control distance is reduced
drastically;
The upper buttons control the front passenger door, the lower
switch control the middle passenger door;
Each remote control is coded to ensure its uniqueness. Each
new coach is delivered equipped with two remote controls. If
7
Passenger door
they are lost, contact your Scania dealer.
If the coach is equipped with only the front passenger door, the
remote control will only contains the upper row buttons.
Note:
1) The remote control will only function when the handbrake is
applied or the air pressure in the system is within the normal
range.
2) The spare remote control should be kept in a safe location;
3) Do not throw or mishandle the remote controller
3. Rocker switch on dashboard
The battery master switch if turned on (by pressing the lower
edge) will connect to bulk of the electrical system to the battery.
The driver can control the door with the rocker switch on the
instrument cluster. “1” switch control the passenger door.
Press the upper or lower part of a rocker switch to open or shut
8
Indice
Altri manuali Scania Altro
