Sceptre ST14 Manuale utente

PREFACE

About this manual

This manual is designed to assist you in setting up and using the LCD Monitor.

Information in this document has been carefully checked for accuracy; however,

no guarantee is given to the correctness of the contents. The information in this

document is subject to change without notice. This document contains

proprietary information protected by copyright. All rights are reserved. No part

of this manual may be reproduced by any mechanical, electronic or other means,

in any form, without prior written permission of the manufacturer.







FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy, and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

•=Reorient or relocate the receiving antenna.

•=Increase the separation between the equipment and the receiver.

•=Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•=Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the manufacturers may

void the user’s authority to operate this equipment.

NOTE:

A shielded-type power cord is required in order to meet the FCC emission limits

and also to prevent interference to the radio and television reception. It is

essential that only the supplied power cord be used.

Use shielded cables only to connect I/O devices to this equipment.

Canadian DOC Notice

For Class B Computing Devices

This Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B repecte toutes les exigences du Règlement

sur le matériel brouilleur du Canada.

Cet appareil numérique de la classe B repecte toutes les exigences du Règlement

Important Safety Instructions

Please read the following instructions carefully. This manual should

be retained for future use.

1. To clean LCD Monitor screen, first, make sure the Monitor is in the power off

mode. Unplug the Monitor from its power source before cleaning it. Do not

spray liquid cleaners directly onto the unit. Stand away from LCD Monitor and

spray cleaning solution onto a rag. Without applying excess pressure, clean the

screen with the slightly dampened rag.

2. Do not place LCD Monitor near a window. Exposing the Monitor to rain, water,

moisture or sunlight can severely damage it.

3. Do not lay anything on top of Monitor-to-PC signal cord. Make sure the cord is

placed in an area where it will not be stepped on.

4. Do not apply pressure to LCD screen. Excess pressure may cause permanent

damage to the display.

5. Do not remove the cover or attempt to service this unit by yourself. You may

void your warranty. Servicing of any nature should be performed only by an

authorized technician.

6. Safe storage of LCD Monitor is in a range of –20 ~ 60°C(or –4 ~ 140°F).

Storing LCD Monitor outside this range could result in permanent damage.

7. If any of the following occurs, immediately unplug your Monitor and call an

authorized technician.

•=Monitor-to-PC signal cord is frayed or damaged.

•=Liquid has been spilled into LCD Monitor, or it has been exposed to rain.

•=LCD Monitor has been dropped or the case has been damaged.

Contents Of This Manual

Chapter 1 : Quick Installation 1

Chapter 2 : Installation

2.1 Unpacking 2

2.2 Positioning 3

2.3 Connecting the AC Power Adaptor 3

2.4 Setting Up the LCD Monitor 5

2.5 Power Management System 5

Chapter 3 : Display Controls

3.1 User Controls and Indicator 6

CHAPTER 1

Quick Installation

1. Read Important Safety Instructions section thoroughly

(on page iii, Preface of this manual) before installing LCD

Monitor.

2. Make sure your computer system and LCD Monitor are both turned

off before any cable connection started.

3. Connect signal cable to the computer.

4. Connect the power cord into the jack of LCD Monitor and plug the

other end of power cord into a wall socket.

5. Turn the computer on.

6. Turn on LCD Monitor DC power switch at the rear of monitor.

And now that, installation has been completed enjoy your LCD Monitor.

CHAPTER 2

Installation

2.1 Unpacking

Before you unpack LCD Monitor, prepare a suitable workspace for your

Monitor and computer. You need a stable and clean surface near a wall

power outlet. Also ensure that LCD Monitor has enough space around it to

allow for airflow. Even though LCD Monitor uses very little power, some

ventilation is needed to ensure that the Monitor doesn’t become too hot.

After you unpack LCD Monitor, make sure the following items are

included in the box and in good condition.

♦=LCD Monitor mounted on its stand

♦=Monitor-to –PC 1.8M signal cable

♦=AC Adaptor

♦=Power cord

♦=This user’s manual

If you find that any of these items is missing or appears damaged, contact

your dealer immediately. Do not throw away the packing material or

shipping carton in case you need to ship or store LCD Monitor in the

future.

2.2 Positioning

Take a moment to prepare a suitable place to set up your workstation. You

need a stable flat dust-free surface with good ventilation. Even though LCD

Monitor has been designed using components that don’t use much power,

they still generate quite a bit of heat. Set up your LCD Monitor so that the

screen doesn’t face a window where sunlight often comes in. The reflection

of sunlight makes LCD Monitor screen difficult to read or view.

Warning!

•=When positioning the equipment, make sure that the main ports and sockets

are easily accessible.

•=Do not place your LCD Monitor close to a heat source.

•=Do not place the LCD Monitor in direct sun light or near a window. Moisture

and direct sunlight exposure may cause LCD monitor serious damage.

2.3 Connecting the AC Power Adaptor

1) Connecting the Power Cord to the AC Adaptor.

Plug the power cord into the receptacle of the Adaptor.

This power connector plugs into the LCD Monitor’s power conn port.

2) Connecting the AC Adaptor to the monitor.

Plug the adaptor’s power connector into the monitor.

3) Connecting the power cord to an AC power source

Your power outlet (mains)

connecting may be different from

that shown here.

The plug should match the standard

for your area.

Indice

Altri manuali Sceptre Monitor

Sceptre

Sceptre X20G-NAGA2 Manuale utente

Sceptre

Sceptre U435CV-UMRD Manuale utente

Sceptre

Sceptre X322 Series Manuale utente

Sceptre

Sceptre X328BV-SRR Manuale utente

Sceptre

Sceptre E408BD-FMQR Manuale utente

Sceptre

Sceptre E195BV-SRR Manuale utente

Sceptre

Sceptre X20WG-Naga Manuale utente

Sceptre

Sceptre X9WG-NagaV Manuale utente

Sceptre

Sceptre X 7G Naga V X7g-NagaV X7g-NagaV Manuale utente

Sceptre

Sceptre D95 Manuale utente

Sceptre

Sceptre U505CV-UMR Manuale utente

Sceptre

Sceptre LCD Monitor X9C-NagaV Manuale utente

Sceptre

Sceptre X20g X20g-NagaIII X20g-NagaIII Manuale utente

Sceptre

Sceptre C278B-144MN Manuale utente

Sceptre

Sceptre E20 Manuale utente

Sceptre

Sceptre C550CV-UMR Manuale utente

Sceptre

Sceptre E246BV-FC Manuale utente

Sceptre

Sceptre X9G-NAGAV Manuale utente

Sceptre

Sceptre U650CV-UMRD Manuale utente

Sceptre

Sceptre E165W-1600HC Manuale utente

Sceptre

Sceptre U505 Series Manuale utente

Sceptre

Sceptre C328W-1920R Manuale utente

Sceptre

Sceptre C275 Manuale utente

Sceptre

Sceptre E246 Series Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione