Scheppach TIGER2000S Manuale utente
WET GRINDER
ASSEMBLY AND OPERATING INSTRUCTIONS
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Due to continuing improvements, actual product may differ slightly from the product described herein.
# W859 28-9-12
TIGER2000S
PAGE2
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded. If the tools should electrically malfunction or
break down, grounding provides a low resistance path to carry electricity away
from the user.
5. Double insulated tools are equipped with a polarized plug (one blade is
wider than the other). This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a polarized outlet. Do not
change the plug in any way. Double insulation eliminates the need for the
three wire grounded power cord and grounded power supply system.
6. Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if your
body is grounded.
7. Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
8. Do not abuse the Power Cord. Never use the Power Cord to carry the tools
or pull the Plug from an outlet. Keep the Power Cord away from heat, oil,
sharp edges, or moving parts. Replace damaged Power Cords immediately.
Damaged Power Cords increase the risk of electric shock.
PERSONAL SAFETY
9.Stay alert. Watch what you are doing, and use common sense when
operating this product. Do not use the Wet Grinder while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating this product may result in serious personal injury.
10.Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts.
PAGE3
11.Avoid accidental starting. Make sure the Power Cord remains unplugged from
its electrical outlet until this product is completely assembled, filled with water,
and ready to use.
12.Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of this product in unexpected
situations.
13.Use safety equipment. Wear eye protection when assembling and
using this product.
TOOL USE AND CARE
14.Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the Wet Grinder. Such
preventive safety measures reduce the risk of starting the unit accidentally.
15.Store idle equipment out of reach of children and other untrained persons.
Electrically powered products are dangerous in the hands of untrained users.
16.Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect this product’s operation. If damaged,
have the Wet Grinder serviced before using. Many accidents are caused
by poorly maintained equipment.
PAGE4
SERVICE
17.Service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
18.When servicing this product, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on theWet Grinder. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
2. Wear AS/NZSapproved safety impact eye glasses under a full face
shield when using the Wet Grinder. Using personal safety devices
reduce the risk for injury. Safety impact eye glasses and full face shields
are available from Harbor Freight Tools.
3. Maintain a safe environment. Keep the area well lit. Make sure there is
adequate surrounding space. Always keep the area free of obstructions, grease,
oil, trash, and other debris. Do not use an electrically powered product in areas
near flammable chemicals, dusts, and vapors.
PAGE5
4. Never leave the Wet Grinder unattended when it is plugged into an electrical
outlet. Turn off the Grinder and unplug the tool before leaving.
5. Carefully inspect the condition of the Wet Grinder before use, and check
the tool continually during use. If any damage is noted, stop immediately
and repair or replace the Grinder.
6. Avoid electrical shock. Make sure the Wet Grinder is unplugged from
its electrical outlet prior to performing any inspection, maintenance, or
cleaning procedures. Do not use the Grinder/Buffer in the rain or in wet
conditions.
7. Use the right product for the job. There are certain applications for which this
product was designed. Do not use small tools, equipment, or accessories to do
the work of larger industrial tools, equipment, or accessories. Do not use this
product for a purpose for which it was not intended.
8. Do not allow children or other unauthorized people to handle or play with
this product.
9. Industrial applications must follow WHSA requirements.
10. Frequently immerse the workpiece in water to prevent overheating.
11. Use the Tool Attachments to steady the workpiece. If the Tool Attachments
are not used, the torque of the spinning Grinding/Polishing Wheel may pull the
workpiece from your hands.
12. Do not use aluminum oxide wheels when grinding nonferrous metals such
as aluminum and brass. Use silicon carbide wheels (not included) for
nonferrous metals.
13. Never install a Grinding Wheel on the polishing side of the tool. Never use
any accessory not specifically designed for this machine. Never attempt to install
a wire brush, abrasive flap wheel, or sanding disc on this Wet Grinder.
14. Performance of this tool (if powered by line voltage) may vary depending on
variations in local line voltage. Extension cord usage may also affect tool
performance.
15. WARNING! Some dust created by power sanding, sawing, grinding, drilling,
16. WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference or failure of the pacemaker.
17. WARNING! The warnings and cautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
and other construction activities, contain chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
lead from lead-based paints, crystalline silica from bricks and cement or other
masonry products, arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety equipment, such as
those dust masks that are specially designed to filter out microscopic particles.
GROUNDING
WARNING!
Improperly connecting the grounding wire can result in the risk of electric shock.
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool.
Never remove the grounding prong from the plug. Do not use the tool if the power
cord or plug is damaged. If damaged, have it repaired by a service facility before
use. If the plug will not fit the outlet, have a proper outlet installed by a qualified
electrician.
PAGE6
PAGE7
PAGE8
SYMBOLOGY
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 17
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
OPERATING INSTRUCTIONS
NOTE:
For additional information regarding the parts listed in the
following pages, refer to the Assembly Diagram on page 16.
1. CAUTION! Always make sure the Wet Grinder is disconnected from its
electrical outlet prior to assembling the tool, changing accessories, or performing
service to the product.
2. Wear AS/NZSapproved safety impact eye glasses under a full face
shield when assembling and operating the Wet Grinder.
3. Make sure the workbench you intend to position the Wet Grinder upon is flat,
level, and sturdy enough to bear the weight of the Grinder, any additional tools
and accessories, and workpieces.
4. The Tool Support (23) may be attached to the Wet Grinder for
vertical
grinding/
honing or
horizontal
grinding/honing, depending on the application.
5. To attach the Tool Support for
vertical
grinding/honing, insert the Tool Support
PAGE9
PAGE10
E
F
G
H
I
J
KNOB
(21)
TOOL SUPPORT
(23)
POWER SWITCH
(34)
WITH SAFETY KEY
KNOB
(21)
TOOL SUPPORT
(23)
ABRASION PASTE
(43)
HONING WHEEL
(27)
WATER TANK
(41)
WATER TANK
(41)
TOOL SUPPORT
(23)
SUPPORT PLATE
(16)
KNOB
(15)
KNOB
(15)
TOOL BLADE
(NOT INCLUDED)
Indice
Altri manuali Scheppach Macinacaffè
Scheppach
Scheppach 1010053 Manuale utente
Scheppach
Scheppach BG200AL Istruzioni per il montaggio
Scheppach
Scheppach BG200W Istruzioni per l'uso e l'installazione
Scheppach
Scheppach SM200L Istruzioni per l’uso
Scheppach
Scheppach DG150GP Istruzioni per l’uso
Scheppach
Scheppach TIGER 3000VS Istruzioni per il montaggio
Scheppach
Scheppach BG200W Manuale utente
Scheppach
Scheppach AG780 Manuale operativo
Scheppach
Scheppach SM200L Istruzioni per il montaggio
Scheppach
Scheppach bgs 700 Istruzioni per l’uso
Scheppach
Scheppach bg 150 Istruzioni per il montaggio
Scheppach
Scheppach SM200L Istruzioni per l’uso
Scheppach
Scheppach HG34 Istruzioni per il montaggio
Scheppach
Scheppach SM150L Manuale utente
Scheppach
Scheppach bgs 700 Istruzioni per il montaggio
Scheppach
Scheppach OSM100 Istruzioni per il montaggio
Scheppach
Scheppach PWS-115 Istruzioni per l’uso
Scheppach
Scheppach BG200AL Istruzioni per l’uso
Scheppach
Scheppach CGP1200 Manuale utente
Scheppach
Scheppach TIGER 2000S Istruzioni per l’uso
