Installing on Windows 98 or Windows Me
Reflex USB Reader Installation Guide 5
Installing on Windows 98 or Windows Me
To install the SchlumbergerSema Reflex USB smart card reader on a
Windows 98 or Windows Me computer, follow these steps, which are
described in detail in the sections that follow:
1Install the new Reflex USB smart card reader software.
2Connect the Reflex USB smart card reader.
3Reboot the computer.
Step 1: Install the Reflex USB smart card reader software
Go to the Reflex Readers Download website (www.reflexreaders.com/
Support/Downloads/downloads.html) to download the latest Reflex USB
driver package for Win98/Me. If the Microsoft Base Components are not
already installed on your computer, you will also need to download and install
that software.
See the package’s Install Notes for installation instructions.
Step 2: Connect the Reflex USB smart card reader
Insert the Reflex USB smart card reader cable connector into the USB port.
The Reflex USB smart card reader is compliant with Plug-and-Play
specifications, so you can make the connection while the computer is running.
The Reflex USB smart card reader power light glows continuously to indicate
that the reader is receiving power, and the computer automatically begins to
scan for Plug-and-Play-compliant hardware. Displayed messages report that
the system has found the new hardware, and has located and installed the
software for it.
Step 3: Reboot the computer
The Windows 98 and Windows Me operating systems detect the Reflex USB
smart card reader as soon as it is connected to the host computer, but the
Smart Card Resource Manager detects it only during reboot or restart.
Therefore, although you will see the Reflex USB smart card reader listed in the
DeviceManager as an installed device after you complete step 2, the Reflex
USB smart card reader is not usable until you reboot.
Refer to the release notes for driver version numbers and information about
potential installation issues.
