SCHOTT SLI-5460 Manuale utente
© Internetagentur Schott GmbH, 2010. All rights reserved.
Release V1.04 | 2010-03
Internetagentur Schott GmbH
Cent-Hoheneichstr. 11
D-96191 Trunstadt
SLI-5460 / SLI-5460-I
Quick Start Guide
ADSL IAD – Satellite optimiced
All electrical and electronic products should be disposed of separately from the municipal waste stream via
designated collection facilities appointed by the government or the local authorities.
The crossed-out wheeled-bin-symbol indicates that the device is covered by the European Directive
2002/96/EC.
The correct disposal and separate collection of your old appliance will help to prevent potential negative
consequences for the environment and the human health. It is a precondition for reuse and recycling of used
electrical and electronic equipment.
For more detailed information about disposal of your old appliances contact your city office, the waste
disposal service or the shop where you have purchased the product.
Quick Start Guide | SLI-5460 / SLI-5460-I | 2010-03 2 ●18
© Internetagentur Schott GmbH, 2010. All rights reserved.
Internetagentur Schott GmbH
Cent-Hoheneichstr. 11
D-96191 Viereth-Trunstadt
Tel. +49 9503 8099999 (DE)
Tel. +49 9503 8099998 (EN)
Fax.+49 9503 50440690
www.satspeed.com
Safety Instructions
•Place the device near an easily accessible mains wall outlet.
•Use only the power supply delivered with the IAD and do not use this power supply
for any other device.
•Cables connected to the sockets labelled with Ethernet 1-4; and must stay
within one building. Do not use this product and all accessories outdoors.
•Protect the device form direct sunlight, water and other liquids, excess dust and do
not use it in damp places (e.g. bath) or explosive areas.
•Clean the device only with a soft and dry cloth. Do never immerse the device into
water or other liquids.
•Never open the device or the power supply delivered with the device.
•The device may affect medical equipment.
Content
1. Scope of Delivery ............................................................................................................3
2. Connecting the IAD .........................................................................................................4
2.1. Computer Requirements...........................................................................................4
2.2. Configuration of the Computer (TCP/IP Settings) ....................................................4
2.2.1. Windows 2000.................................................................................................... 5
2.2.2. Windows XP ....................................................................................................... 6
2.2.3. Windows Vista.................................................................................................... 8
2.2.4. MAC OS 9.x .......................................................................................................9
2.2.5. MAC OS X........................................................................................................10
2.3. Connecting the IAD to Computers, Telephones and Power Supply.......................12
2.3.1. Connecting Computers ....................................................................................12
2.3.2. Connecting Analogue Telephones ...................................................................12
2.3.3. Connecting the ADSL and Line Cable ............................................................. 13
2.3.4. Power Supply ................................................................................................... 14
2.4. Checking the LEDs .................................................................................................14
3. Quick Start (for easy setup)........................................................................................... 15
4. Troubleshooting.............................................................................................................17
5. EC Declaration of Conformity........................................................................................18
Quick Start Guide | SLI-5460 / SLI-5460-I | 2010-03 3 ●18
© Internetagentur Schott GmbH, 2010. All rights reserved.
Internetagentur Schott GmbH
Cent-Hoheneichstr. 11
D-96191 Viereth-Trunstadt
Tel. +49 9503 8099999 (DE)
Tel. +49 9503 8099998 (EN)
Fax.+49 9503 50440690
www.satspeed.com
1. Scope of Delivery
Please check whether all the following parts are included in the gift box:
1. satspeed IAD SLI-5460 (-I)
2. Power Supply
3. detachable antenna (WLAN)
4. ADSL Cable (grey)
5. PSTN Telephone Cable (black)
6. LAN Cable (yellow)
7. Quick Start Guide (including a drill hole template for wall mounting)
1 2 3
4 5 6
7 8
Quick Start Guide | SLI-5460 / SLI-5460-I | 2010-03 4 ●18
© Internetagentur Schott GmbH, 2010. All rights reserved.
Internetagentur Schott GmbH
Cent-Hoheneichstr. 11
D-96191 Viereth-Trunstadt
Tel. +49 9503 8099999 (DE)
Tel. +49 9503 8099998 (EN)
Fax.+49 9503 50440690
www.satspeed.com
2. Connecting the IAD
The coloured sockets and the coloured cables allow an easy cabling. Use the cables
delivered with the device. Be careful, because incorrect cabling or switched off devices
will not work. Check the connected devices using the LEDs on the front side of the IAD. If
you are using internet via satellite, connect on LAN 1 via network cable the satellite
modem.
2.1. Computer Requirements
Before installing the IAD make sure that:
•Your Computer is equipped with a LAN-Interface with RJ45 and
•You have a Web-Browser (e.g. Internet Explorer or Firefox) installed on your
Computer.
2.2. Configuration of the Computer (TCP/IP Settings)
The configuration of your PC is depending on the operating system. The following
operating systems are covered:
Windows 2000 MAC OS 9.x
Windows XP MAC OS X
Windows Vista
Proceed now with the section that is dedicated to your PC’s operating system.
Quick Start Guide | SLI-5460 / SLI-5460-I | 2010-03 5 ●18
© Internetagentur Schott GmbH, 2010. All rights reserved.
Internetagentur Schott GmbH
Cent-Hoheneichstr. 11
D-96191 Viereth-Trunstadt
Tel. +49 9503 8099999 (DE)
Tel. +49 9503 8099998 (EN)
Fax.+49 9503 50440690
www.satspeed.com
2.2.1. Windows 2000
Click on Start ÆSettings ÆControl
Panel.
Double-click on the Network and Dial-
up Connections icon.
The Network window appears.
Double-click on the Local Area
Connection icon for the applicable
Ethernet adapter (usually it is the first
Local Area Connection listed).
Click on Properties.
Select Internet Protocol (TCP/IP).
Click on Properties.
Select Obtain an IP address
automatically.
Click on OK on the subsequent screens
to complete the configuration.
Restart your computer.
Quick Start Guide | SLI-5460 / SLI-5460-I | 2010-03 6 ●18
© Internetagentur Schott GmbH, 2010. All rights reserved.
Internetagentur Schott GmbH
Cent-Hoheneichstr. 11
D-96191 Viereth-Trunstadt
Tel. +49 9503 8099999 (DE)
Tel. +49 9503 8099998 (EN)
Fax.+49 9503 50440690
www.satspeed.com
2.2.2. Windows XP
The following instructions assume you are running Windows XP’s default interface. If
you are using the Classical interface (where the icons and menus look like previous
Windows versions), please follow the instructions for Windows 2000.
Click on Start ÆControl Panel.
Click on the Network and Internet
Connections icon.
Click on the Network Connections
icon.
The Network window appears.
Double-click on the Local Area
Connection icon for the applicable
Ethernet adapter (usually it is the first
Local Area Connection listed).
Click on Properties.
Select Internet Protocol (TCP/IP).
Click on Properties.
Quick Start Guide | SLI-5460 / SLI-5460-I | 2010-03 7 ●18
© Internetagentur Schott GmbH, 2010. All rights reserved.
Internetagentur Schott GmbH
Cent-Hoheneichstr. 11
D-96191 Viereth-Trunstadt
Tel. +49 9503 8099999 (DE)
Tel. +49 9503 8099998 (EN)
Fax.+49 9503 50440690
www.satspeed.com
Select Obtain an IP address
automatically.
Click on OK on the subsequent
windows to complete the configuration.
Restart your computer.
Quick Start Guide | SLI-5460 / SLI-5460-I | 2010-03 8 ●18
© Internetagentur Schott GmbH, 2010. All rights reserved.
Internetagentur Schott GmbH
Cent-Hoheneichstr. 11
D-96191 Viereth-Trunstadt
Tel. +49 9503 8099999 (DE)
Tel. +49 9503 8099998 (EN)
Fax.+49 9503 50440690
www.satspeed.com
2.2.3. Windows Vista
Click on Start ÆControl Panel.
Click on the Network and Sharing
Center icon.
Click on Broadband Connections Æ
Properties.
The Local Area Connection Status
screen appears.
Click on Properties.
Select Internet Protocol Version 4
(TCP/IPv4).
Click on Properties.
Select Obtain an IP Address
automatically.
Click on OK to complete the
configuration.
Click on OK to finish the configuration.
Quick Start Guide | SLI-5460 / SLI-5460-I | 2010-03 9 ●18
© Internetagentur Schott GmbH, 2010. All rights reserved.
Internetagentur Schott GmbH
Cent-Hoheneichstr. 11
D-96191 Viereth-Trunstadt
Tel. +49 9503 8099999 (DE)
Tel. +49 9503 8099998 (EN)
Fax.+49 9503 50440690
www.satspeed.com
2.2.4. MAC OS 9.x
From the Apple Menu, point to Control
Panels and then click TCP/IP.
From the Connect via pull-down menu
select Ethernet built-in.
From the Configure pull-down menu,
select Using DHCP Server.
Close the TPC/IP window and click on
[Save].
Quick Start Guide | SLI-5460 / SLI-5460-I | 2010-03 10 ●18
© Internetagentur Schott GmbH, 2010. All rights reserved.
Internetagentur Schott GmbH
Cent-Hoheneichstr. 11
D-96191 Viereth-Trunstadt
Tel. +49 9503 8099999 (DE)
Tel. +49 9503 8099998 (EN)
Fax.+49 9503 50440690
www.satspeed.com
2.2.5. MAC OS X
From the Apple Menu, select System
Preferences...
Click on the Network icon in the
Internet & Network area.
From the Show pull-down menu select
Built-in Ethernet.
On the TCP/IP tab, select Using DHCP
from the Configure pull-down menu.
Questo manuale è adatto per i seguenti modelli
1
Indice
