SCHUNK VERO-S NSE mini 90-25 Istruzioni utente

Translation of Original Operating Manual

VERO-S quick-change pallet system

NSE mini 90-25, NSE mini 90-25-V10

Assembly and Operating Manual

Superior Clamping and Gripping

Imprint

2 01.00|NSE mini 90-25, NSE mini 90-25-V10 |en

Imprint

This manual is protected by copyright. The author is SCHUNK GmbH & Co. KG. All rights

reserved. Any reproduction, processing, distribution (making available to third parties),

translation or other usage - even excerpts - of the manual is especially prohibited and

requires our written approval.

Technical changes:

We reserve the right to make alterations for the purpose of technical improvement.

Document number: 1155185

Version: 01.00 |14/12/2017|en

Dear Customer,

thank you for trusting our products and our family-owned company, the leading

technology supplier of robots and production machines.

Our team is always available to answer any questions on this product and other solutions.

Ask us questions and challenge us. We will find a solution!

Best regards,

Your SCHUNK team

H.-D. SCHUNK GmbH & Co.

Spanntechnik KG

Lothringer Str. 23

D-88512 Mengen

Tel. +49–7572-7614-0

Fax +49-7572-7614-1099

[email protected]

schunk.com

Table of contents

01.00|NSE mini 90-25, NSE mini 90-25-

V10 |en

Table of contents

General .................................................................................................................... 5

1.1

About this manual .................................................................................................... 5

1.1.1

Presentation of Warning Labels.................................................................... 5

1.1.2

Applicable documents................................................................................... 6

1.1.3

Sizes............................................................................................................... 6

1.2

Warranty................................................................................................................... 6

1.3

Scope of delivery ...................................................................................................... 7

1.4

Accessories ............................................................................................................... 7

Basic safety notes .................................................................................................... 8

2.1

Intended use............................................................................................................. 8

2.2

Not intended use ...................................................................................................... 8

2.3

Constructional changes ............................................................................................ 8

2.4

Spare parts................................................................................................................ 9

2.5

Environmental and operating conditions................................................................. 9

2.6

Personnel qualification............................................................................................. 9

2.7

Personal protective equipment.............................................................................. 10

2.8

Notes on safe operation......................................................................................... 11

2.9

Transport ................................................................................................................ 11

2.10

Malfunctions........................................................................................................... 11

2.11

Disposal................................................................................................................... 12

2.12

Fundamental dangers............................................................................................. 12

2.12.1

Protection during handling and assembly .................................................. 12

2.12.2

Protection during commissioning and operation ....................................... 13

2.12.3

Protection against dangerous movements................................................. 13

2.12.4

Notes on particular risks ............................................................................. 14

Technical data ......................................................................................................... 17

Assembly................................................................................................................. 18

4.1

Pre-assembly .......................................................................................................... 18

4.2

Installing and connecting ....................................................................................... 18

4.3

Fastening and connection ...................................................................................... 19

4.3.1

NSE mini 90-25 ............................................................................................ 21

4.3.2

NSE mini 90-25-V10 .................................................................................... 22

4.4

SPA 20 mini, SPB 20 mini, SPC 20 mini clamping bolts .......................................... 23

4.5

Options ................................................................................................................... 25

4.6

Pneumatic circuit diagram NSE mini 90-25, NSE mini 90-25-V10.......................... 26

4.7

Screw tightening torques ....................................................................................... 27

Table of contents

4 01.00|NSE mini 90-25, NSE mini 90-25-V10 |en

Operation................................................................................................................ 28

Maintenance and care ............................................................................................. 29

Troubleshooting ...................................................................................................... 30

7.1

The clamping area does not unlock ....................................................................... 30

7.2

The clamping area does not unlock properly......................................................... 30

7.3

The quick-change pallet system no longer opens quietly...................................... 30

Seal kit and part lists ............................................................................................... 31

8.1

Seal kit lists ............................................................................................................. 31

8.2

Part lists .................................................................................................................. 31

Assembly Drawings ................................................................................................. 33

9.1

NSE mini 90-25 ....................................................................................................... 33

9.2

NSE mini 90-25-V10 ............................................................................................... 34

Translation of original declaration of incorporation................................................. 35

Appendix on Declaration of Incorporation, as per 2006/42/EC, annex II, No. 1 B ..... 36

General

01.00|NSE mini 90-25, NSE mini 90-25-

V10 |en

General

About this manual

This manual contains important information for a safe and

appropriate use of the product.

This manual is an integral part of the product and must be kept

accessible for the personnel at all times.

Before starting work, the personnel must have read and under-

stood this operating manual. Prerequisite for safe working is the

observance of all safety instructions in this manual.

Illustrations in this manual are provided for basic understanding

and may differ from the actual product design.

In addition to these instructions, the documents listed under

(1.1.2, Page 6) are applicable.

Presentation of Warning Labels

To make risks clear, the following signal words and symbols are

used for safety notes.

DANGER

Danger for persons!

Non-observance will inevitably cause irreversible injury or death.

WARNING

Dangers for persons!

Non-observance can lead to irreversible injury and even death.

CAUTION

Dangers for persons!

Non-observance can cause minor injuries.

NOTICE

Material damage!

Information about avoiding material damage.

1.1

1.1.1

General

6 01.00|NSE mini 90-25, NSE mini 90-25-V10 |en

Applicable documents

• General terms of business*

• Catalog data sheet of the purchased product *

The documents marked with an asterisk (*) can be downloaded on

our homepage schunk.com

Sizes

This operating manual applies to the following sizes:

Quick-Change Pallet System

• NSE mini 90-25

• NSE mini 90-25-V10

Warranty

The warranty period is 24 months after delivery date from factory

or 500 000 cycles*, if it is used as intended, under the following

conditions:

• Observe the applicable documents

(1.1.2, Page 6).

• Observe the ambient conditions and operating conditions,

(2.5, Page 9).

• Observance of the specified care and maintenance instructions

(6, Page 29).

Parts touching the workpiece and wear parts are not included in

the warranty.

* A cycle consists of a complete clamping process

("Open" and "Close").

1.1.2

1.1.3

1.2

General

01.00|NSE mini 90-25, NSE mini 90-25-

V10 |en

Scope of delivery

The scope of delivery includes

• Quick-change pallet system in the version ordered

• NSE mini 90-25 accessory pack:

3 O-rings Ø 8 x 1

6 cover caps

6 fastening screws M6

• NSE mini 90-25-V10 accessory pack:

3 O-rings Ø 8 x 1

6 cover caps

5 fastening screws M6

1 fitting screw M6

Accessories

(see catalog or data sheets when ordering separately)

• SPA mini, SPB mini, SPC mini clamping bolts

• IXB V10 PAL mini indexing pin

• Fitting screw

• Protection cover SDE mini

1.3

1.4

Basic safety notes

8 01.00|NSE mini 90-25, NSE mini 90-25-V10 |en

Basic safety notes

Intended use

This product is intended solely for positioning and clamping

workpieces or clamping pallets on machine tools or other suitable

technical devices.

• The product may only be used within the scope of its technical

data, (3, Page 17).

• The product is intended for industrial and industry-oriented

use.

• Appropriate use of the product includes compliance with all

instructions in this manual.

Not intended use

The product is not being used as intended if, for example:

• It is used as a pressing tool, a chuck, a load-handling device or

as lifting equipment.

• It is used for turning applications without consulting SCHUNK.

• It is used in working environments that are not permissible.

• People work on machines or technical equipment that do not

comply with the EC Machinery Directive 2006/42/EC,

disregarding the applicable safety regulations.

• The technical data specified by the manufacturer are exceeded

during usage.

Constructional changes

Implementation of structural changes

By conversions, changes, and reworking, e.g. additional threads,

holes, or safety devices can impair the functioning or safety of the

product or damage it.

• Structural changes should only be made with the written

approval of SCHUNK.

2.1

2.2

2.3

Basic safety notes

01.00|NSE mini 90-25, NSE mini 90-25-V10 |

Spare parts

Use of unauthorized spare parts

Using unauthorized spare parts can endanger personnel and

damage the product or cause it to malfunction.

• Use only original spare parts or spares authorized by SCHUNK.

Environmental and operating conditions

Required ambient conditions and operating conditions

Incorrect ambient and operating conditions can make the product

unsafe, leading to the risk of serious injuries, considerable material

damage and/or a significant reduction to the product's life span.

• Make sure that the product is used only in the context of its

defined application parameters, (3, Page 17).

• Make sure that the product is a sufficient size for the

application.

• Make sure that the contact surfaces of the interface are always

clean.

• Make absolutely sure that no chips of any kind can enter the

interface and that the interface does not fill with cooling

emulsion, which is particularly possible with vertical alignment

of the clamping pin axis. The best way to ensure both of these

is to use the SDE mini protection covers. If the interface should

fill with cooling emulsion, initiate the unlocking process and dry

out the interface in actuated state.

• Only use high-quality cooling emulsions with anti-corrosive

additives during processing.

Personnel qualification

Inadequate qualifications of the personnel

If the personnel working with the product is not sufficiently

qualified, the result may be serious injuries and significant

property damage.

• All work may only be performed by qualified personnel.

• Before working with the product, the personnel must have read

and understood the complete assembly and operating manual.

• Observe the national safety regulations and rules and general

safety instructions.

2.4

2.5

2.6

Basic safety notes

10 01.00|NSE mini 90-25, NSE mini 90-25-V10 |en

The following personal qualifications are necessary for the various

activities related to the product:

Due to their technical training, knowledge and experience, trained

electricians are able to work on electrical systems, recognize and

avoid possible dangers and know the relevant standards and

regulations.

Due to its technical training, knowledge and experience, qualified

personnel is able to perform the delegated tasks, recognize and

avoid possible dangers and knows the relevant standards and

regulations.

Instructed persons were instructed by the operator about the

delegated tasks and possible dangers due to improper behaviour.

Due to its technical training, knowledge and experience, service

personnel of the manufacturer is able to perform the delegated

tasks and to recognize and avoid possible dangers.

Personal protective equipment

Use of personal protective equipment

Personal protective equipment serves to protect staff against

danger which may interfere with their health or safety at work.

• When working on and with the product, observe the

occupational health and safety regulations and wear the

required personal protective equipment.

• Observe the valid safety and accident prevention regulations.

• Wear protective gloves to guard against sharp edges and

corners or rough surfaces.

• Wear heat-resistant protective gloves when handling hot

surfaces.

• Wear protective gloves and safety goggles when handling

hazardous substances.

• Wear close-fitting protective clothing and also wear long hair in

a hairnet when dealing with moving components.

Trained electrician

Qualified personnel

Instructed person

Service personnel of

the manufacturer

2.7

Altri manuali per VERO-S NSE mini 90-25

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SCHUNK Utensili elettrici

SCHUNK

SCHUNK iTENDO2 pad Istruzioni utente

SCHUNK

SCHUNK KSC2 40 Manuale utente

SCHUNK

SCHUNK TANDEM KSPplus-BWM Istruzioni utente

SCHUNK

SCHUNK GSP-P 08 Istruzioni utente

SCHUNK

SCHUNK TANDEM KSF plus Series Istruzioni utente

SCHUNK

SCHUNK SRH-plus Series Istruzioni utente

SCHUNK

SCHUNK KSP3 64 Istruzioni utente

SCHUNK

SCHUNK PGF Istruzioni utente

SCHUNK

SCHUNK PGB Series Istruzioni utente

SCHUNK

SCHUNK VERO-S WDM-5X Istruzioni utente

SCHUNK

SCHUNK PSH 32 Istruzioni utente

SCHUNK

SCHUNK KSC-D 80 Guida utente

SCHUNK

SCHUNK NST3 series Istruzioni utente

SCHUNK

SCHUNK EGL Istruzioni utente

SCHUNK

SCHUNK TANDEM KSH plus Istruzioni utente

SCHUNK

SCHUNK TANDEM KSH3 IM 100 Istruzioni utente

SCHUNK

SCHUNK RST-P 060 Istruzioni utente

SCHUNK

SCHUNK PGN-plus-E Series Manuale di riparazione

SCHUNK

SCHUNK KSX-C Guida utente

SCHUNK

SCHUNK KSO 65 Guida utente

SCHUNK

SCHUNK ROTA NCO 165 Manuale utente

SCHUNK

SCHUNK EGP Guida utente

SCHUNK

SCHUNK KSC-F 80 Manuale utente

SCHUNK

SCHUNK KSC 160 Series Guida utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale