Schwinn 9-7300 Guida di riferimento

Technical Procedure

Page 1

637-8642 Rev. A

Latest Rev.

Service Manual

Links

Generator Belt Replacement

Applies to: AC Power (9-7300)

Required Tools:

• #2 Phillips Screwdriver

• 9/16” Socket

• 10mm Deep Socket

1. Use a #2 phillips screwdriver to remove the screw securing

the right side ywheel cap to the bike, then remove the

cap.

2. Use a #2 phillips screwdriver to remove the screws securing

the left generator cover to the bike

3. With the left generator cover removed, use a screwdriver to

remove the screw hidden by the generator board, angled

as shown.

Technical Procedure

Page 2

637-8642 Rev. A

4. Use a #2 phillips screwdriver to remove the screws securing

the outer chain guard to the bike

5. Remove the outer chain guard.

TECH TIP: Slowly rotate the user right side crank arm toward

the rear of the bike to help with removal of the outer chain

guard.

6. Use a 9/16” socket to remove the axle nuts on both sides of

the ywheel.

Technical Procedure

Page 3

637-8642 Rev. A

7. Remove the tension bolt covers from the front of the bike

8. Using a 10mm deep socket, remove the left and right-side

tension screws from the front forks of the bike.

TECH TIP: If an accessory (such as the Body Bar Holster) is lim-

iting access to the tensioning nuts, use a 6mm allen key with a

10mm deep socket on the end of it to work within the clearance

available.

9. Carefully move the ywheel toward the rear of the bike and

down to drop the ywheel free from the frame.

10. Once the ywheel is free from the bike, install the new gen-

erator belt/band onto the left side ywheel pulley.

11. Reinstall the ywheel

Technical Procedure

Page 4

637-8642 Rev. A

12. Loop the free end of the belt/band over the generator

pulley.

TECH TIP: If the generator band slips o of the ywheel pulley,

remove the nger guards with a #2 phillips screwdriver - it

makes placing the belt/band into the pulley groove much

easier.

13. After replacing the belt/band the carbon blue belt (main

drive belt) will need to be tensioned.

14. Use a 10mm deep socket to tension/loosen the left and

right tension nuts by turning clockwise to tighten and

counter-clockwise to loosen. Be sure to adjust the bolts

evenly so that the ywheel is not angled between the forks.

Using a Hz-detecting app, pluck the belt and measure the

Hz. A properly tensioned belt should measure at ~100

Hz.

TECH TIP: If an accessory (such as the Body Bar Holster) is lim-

iting access to the tensioning nuts, use a 6mm allen key with a

10mm deep socket on the end of it to work within the clearance

available.

15. Lower the brake down and ensure that none of the brake

magnets are touching the ywheel.

16. Once the belt has been tensioned so that the correct Hz is

measured and the ywheel has been checked for align-

ment then tighten the axle bolts that were loosened in Step

NOTE: Part of the frame has been moved for clarity

Brake Magnets

Flywheel

Indice

Altri manuali Schwinn Attrezzature per il fitness

Schwinn

Schwinn SCHWIN COMP Manuale utente

Schwinn

Schwinn AD6 Manuale utente

Schwinn

Schwinn 4iiii Manuale utente

Schwinn

Schwinn Star Trac 4iiii Manuale utente

Schwinn

Schwinn MPower Echelon2 Power Upgrade Manuale utente

Schwinn

Schwinn SCHWINN AC PERFORMANCE FULL ASSY Guida rapida

Schwinn

Schwinn Active series 20 series Manuale utente

Schwinn

Schwinn 490e Manuale utente

Schwinn

Schwinn 9-7310 Manuale utente

Schwinn

Schwinn A.C. Performance Manuale utente

Schwinn

Schwinn AD6 Manuale utente

Schwinn

Schwinn 410 i Manuale utente

Schwinn

Schwinn 590R Manuale utente

Schwinn

Schwinn 590U Manuale utente

Schwinn

Schwinn AD6 Manuale utente

Schwinn

Schwinn Cadence Pro Manuale utente

Schwinn

Schwinn IC Pro Manuale utente

Schwinn

Schwinn AD6 Manuale utente

Schwinn

Schwinn 411 Manuale di istruzioni

Schwinn

Schwinn AD6 Manuale utente

Schwinn

Schwinn AirDyne Pro Manuale utente

Schwinn

Schwinn 230 Recumbent Bike Manuale utente

Schwinn

Schwinn IC3 Manuale utente

Schwinn

Schwinn Triple Link-SDL Guida all'installazione

Manuali Attrezzature per il fitness popolari di altre marche

NSD

NSD PB-188P Manuale utente

Performance

Performance HyperVibe Manuale utente

Scalamobil

Scalamobil S27 Manuale utente

Precor

Precor Experience Series Manuale utente

FYTTER

FYTTER RedMIUM BENCH BE-T6R Manuale utente

Taurus

Taurus TF-RK1312 Manuale utente

Nustep

Nustep T5 Manuale utente

Precor

Precor CW-507 Manuale utente

Movement

Movement BICEPS Idea Manuale utente

Kegel8

Kegel8 V For Men Manuale utente

Skandika

Skandika Styrke II Manuale utente

BLK BOX

BLK BOX 21-0122-0B Manuale utente

Stamina

Stamina aeropilates premier 299 Manuale utente

SPORTSTECH

SPORTSTECH PBX300 Manuale utente

ParaBody

ParaBody Serious Steel 877102 Manuale utente

Weslo

Weslo Gym 650 Manuale utente

Rebel

Rebel ACTIVE RBA-1011 Manuale utente

4iiii

4iiii FLiiiight Manuale utente