ScienceSeeds MAGIC PENNY BOX Manuale utente
MAGIC PENNY BOX - INSTRUCTIONS
Step 1:
Start with side A (A) and insert
one of the clips (I) into the slots with
the square marking as shown.
Step 3:
Insert the other clip (I) into
side B (B) where the square marking is
located as shown.
Step 2:
Connect side A (A) with the
box face (E) so the A markings are
aligned as shown.
Step 4:
Attach side B (B) to the rest
of the box, by connecting the slots
marked “B” as shown.
Step 5:
Insert the magnet piece (H)
into side C (C) with the magnet facing
upwards.
Step 6:
Attach side (C) to the rest of
the box.
A
B
C
I
E
F
H
G
D
A - Side A
B - Side B
C - Side C
D - Side D
E - Box Face
F - Magnet Wall
G - Keyhole Wall
H - Magnet Piece
I - Clips (2)
J - Keys (2)
Prep:
• Lay out your pieces so you can easily identi-
fy them.
• Use markers or paint to decorate the vari-
ous parts to personalize your box.
• We recommend coloring the pieces before
assembling the locomotive.
Additional Information
1. You can use wood glue to secure the parts if
necessary. Dispense small amounts of glue.
Masking tape will help secure the pieces
while the glue dries.
2. Your penny box has been laser cut on ply-
wood which is not always uniform in width.
Consequently some pieces may t more
tightly than others.
3. Use sandpaper to sand down parts if the t
is tight.
J
Slide a penny into the slot on the
box face (E).
Solution: Step 1: To open the box and
remove the penny, insert the key into
the hole by the penny slot.
Solution: Step 2: Using the key and
penny, push o the magnetic wall,
and the penny will fall out!
Step 7:
Attach the keyhole wall (G) to
the rest of the box using the slots on
the open face.
Step 9b:
Here is another view of the
magnet connection.
Step 8:
Attach side D (D) to the box
over the keyhole wall (G).
Step 10:
Your magic penny box is
complete!
Step 9a:
Connect the nal box side, the
magnet wall (F), by lining up with the
magnet piece (H).
Present your new puzzle with the
provided key (J).
Thank you for purchasing our locomotive kit.
Additional kits are available at www.scienceseeds.com/shop
Share with us your completed truck by sending a photo to shop@scienceseeds.com
Indice
Altri manuali ScienceSeeds Giocattolo
